Composition,radioactivity, and possible applications of kaolin deposits of Sinai,Egypt

This work discusses the composition, radioactivity, and possible utilization of the kaolin resources in Sinai which are hosted in thick sandstone sequences belonging to the Carboniferous (Wadi Khaboba) and Early Cretaceous (Wadi Iseila and Abansakar) ages. The characterization of kaolin was done by microscopic and SEM examination, supported by XRD and ICP-MS analyses. The studied kaolin resources consist of kaolinite, as the main constituent, associated with subsidiary dickite and halloysite, and minor contribution of smectite and illite. The most dominant non-clay mineral is quartz, besides minor gypsum, dolomite, and hematite. Ferrugination dominates, in most cases, at the upper boundaries of the kaolin lenses, suggesting possible supergene activity. The high Al₂O₃/SiO₂ ratio for the Cretaceous kaolin (0.54, in average) specifies its better grade relative to the Carboniferous kaolin (0.43, in average). The kaolin of the middle part of lens C in Wadi Iseila contains Si/Al molecular ratio of about unity, suggesting high-grade kaolin. The Carboniferous kaolin has enriched the radionuclides: U, Th, and Ra (at disequilibrium state due to leaching of eU relative to Ra) and the REE, relative to that of the Cretaceous age. The Carboniferous kaolin is characterized by a higher contribution of HREE (zircon signature), whereas LREE seems to be more influential for the Early Cretaceous kaolin (monazite signature). In spite of the very high CIA index (93 to 99), none of the analyzed kaolin deposits displays Ce abnormality. The high radioactivity of some Carboniferous kaolin can be a serious impediment for its utilization or its exportation. The kaolin of Sinai does not satisfy the international standards for paperwork industries and refractory manufacturing, but beneficiation may overcome this challenge. However, some lenses have high-grade kaolin with a low percentage of oxides of iron, magnesium, calcium, sodium, and potassium and a low radioactivity, hence nominated for the local refractory industry. The high-grade kaolin of Sinai fulfills the standards required for ceramics manufacturing in the global market. Grade 3 kaolin (< 30%, Al₂O₃) can be used in the manufacturing of white Portland cement and red glaze manufacturing on both local and global markets.     

The Natural Hazards Theme of the International Year of Planet Earth

The United Nations has declared 2008 to be the International Year of Planet Earth. It is being organised under the auspices of the International Union of Geological Sciences and UNESCO. Planning for the International Year of Planet Earth has consisted of establishing 10 major science themes including Hazards. The Hazards Theme is centred around the following key questions: (1) How have humans altered the geosphere, the biosphere and the landscape, thereby creating long-term changes detrimental to life and the environment and triggering certain hazards, while increasing societal vulnerability to geophysical (geological and hydrometeorological) hazards? (2) What technologies and methodologies are required to assess the vulnerability of people and places to hazards and how might these be used at a variety of spatial scales? (3) How do geophysical hazards compare relative to each other regarding current capabilities for monitoring, prediction and mitigation and what can be done in the short-term to improve these capabilities (4) What barriers exist to the utilisation of risk and vulnerability information by governments (and other entities) for risk and vulnerability reduction policies and planning (including mitigation) from each of the geophysical hazards? Following the 26 December 2004 Indian Ocean Tsunami and the UN World Conference on Disaster Reduction held in Kobe, Japan in January 2005, the International Council for Science (ICSU) decided to establish a major research programme and initiative on Natural and Human Induced Environmental Hazards and Disasters that will co-operate with the Hazards theme of the International Year and continue through to 2011.     

The largest karst cave discovered in a tunnel during motorway construction in Slovenia’s Classical Karst (Kras)

Karst researchers of the Karst Research Institute ZRC SAZU are regularly consulted during the planning of Slovenia’s motorways and invited to observe and monitor construction in the karst areas. More than 350 caves have been discovered in the course of building 60 km of new motorways over the past decade. Access to the most important caves is preserved by concrete tubes closed with metal covers at the roadside. The largest cave system in a tunnel, named LC-S647, is almost entirely preserved. The protection of this cave will serve as a good example for the preservation of natural heritage in the future. Construction work for the motorway uncovered a high degree of karstification. In particular, the discovery of this cave in the Kastelec tunnel LC-S647 showed the existence of a major cave system in the geological and speleological past. A number of unconnected passages have also been found. Caves discovered during highway construction have brought new knowledge about the cavernosity and the geological history of this part of the karst.     

Implications of subsurface thermal–hydraulic–mechanical processes associated with glaciation on Shield flow system evolution and performance assessment

A deep geologic repository (DGR) situated on the Canadian Shield will be subject to long-term climate change that will markedly alter surface conditions as a result of glaciation and permafrost penetration. Systematic, two-dimensional and three-dimensional coupled thermal–hydraulic–mechanical finite-element simulations with varying degrees of coupling, including depth-dependent salinity (represented as a change in groundwater density) and temperature-dependent density and viscosity, were undertaken to address the implications of glaciation on groundwater flow system dynamics as it could affect DGR performance. The modelling domain consisted of a 1.6-km deep sub-regional scale (≈100 km²) fractured Shield flow system. Initial and transient thermal, hydraulic and mechanical boundary conditions were developed from two realizations of the University of Toronto Glacial Systems Model of the last Laurentide glaciation. Results indicate that during the glacial loading/unloading cycle, for this particular conceptual model, there is limited penetration of glacial meltwaters to depth and small residual anomalous hydraulic head. During glacial coverage, the mechanical factor of safety increases in the moderately fractured and sparsely fractured rock mass, but principal effective stress reorientation also occurs. Given the assumed nonglacial in situ state of stress and mechanical properties, the fracture zones were predicted to be less stable under glacial conditions.

Hydrogeochemistry of the Koyna River basin,India

Hydrogeochemistry of the Koyna River basin, famous for the Koyna earthquake (magnitude 7) of 1967, has been studied. Basalt is the primary aquifer; laterites, alluvium, and talus deposits form aquifers of secondary importance. Groundwater generally occurs under water table conditions in shallow aquifers. Deeper aquifers are associated only with basalts. One hundred and 87 water samples were collected from various sources, such as dugwells, borewells, springs, and surface water, including 40 samples for analysis of iron. Only major constituents were analyzed. Analyses show that the concentrations of Ca²⁺ exceed that of Mg²⁺ in almost all water samples; the concentrations of Na⁺ are generally next to Ca²⁺ and are always higher than that of K⁺; and CO₃ ^2– and SO₄ ^2– are very low and are often negligible. Groundwater in borewells tapping deeper aquifers has higher mineralization compared to that in dugwells representing shallow aquifers. Majority of the water samples are dominated by alkaline earths (Ca²⁺, Mg²⁺) and weak acids (HCO₃ ⁻, CO₃ ^2–). Groundwater from shallow aquifers is generally calcium-bicarbonate type (53%) and calcium-magnesium-bicarbonate type (27%). In case of deeper aquifer, it is mostly calcium-magnesium-bicarbonate type (29%), sodium-bicarbonate type (24%), calcium-bicarbonate type (19%), calcium-magnesium-sodium-bicarbonate type (19%) and sodium-calcium-bicarbonate type (9%). Groundwater water is generally fit for drinking and irrigation purposes, except in the lower reaches of the Koyna River basin, which is affected by near water logging conditions.     

Surface-Based 3D Modeling of Geological Structures

Building a 3D geological model from field and subsurface data is a typical task in geological studies involving natural resource evaluation and hazard assessment. However, there is quite often a gap between research papers presenting case studies or specific innovations in 3D modeling and the objectives of a typical class in 3D structural modeling, as more and more is implemented at universities. In this paper, we present general procedures and guidelines to effectively build a structural model made of faults and horizons from typical sparse data. Then we describe a typical 3D structural modeling workflow based on triangulated surfaces. Our goal is not to replace software user guides, but to provide key concepts, principles, and procedures to be applied during geomodeling tasks, with a specific focus on quality control.     

An experimental investigation to characterise soil macroporosity under different land use and land covers of northeast India

Saturated macropore flow is the dominant hydrological process in tropical and subtropical hilly watersheds of northeast India. The process of infiltration into saturated macroporous soils is primarily controlled by size, network, density, connectivity, saturation of surrounding soil matrix, and depthwise distribution of macropores. To understand the effects of local land use, land cover and management practices on soil macroporosity, colour dye infiltration experiments were conducted with ten soil columns (25 × 25 × 50 cm) collected from different watersheds of the region under similar soil and agro-climatic zones. The sampling sites included two undisturbed forested hillslopes, two conventionally cultivated paddy fields, two forest lands abandoned after Jhum cultivation, and two paddy fields, one pineapple plot and one banana plot presently under active cultivation stage of the Jhum cycle. Digital image analyses of the obtained dye patterns showed that the infiltration patterns differed significantly for different sites with varying land use, land cover, and cultivation practices. Undisturbed forest soils showed high degree of soil macroporosity throughout the soil profile, paddy fields revealed sealing of macropores at the topsoil due to hard pan formation, and Jhum cultivated plots showed disconnected subsoil macropores. The important parameters related to soil macropores such as maximum and average size of macropores, number of active macropores, and depthwise distribution of macropores were estimated to characterise the soil macroporosity for the sites. These experimentally derived quantitative data of soil macroporosity can have wide range of applications in the region such as water quality monitoring and groundwater pollution assessment due to preferential leaching of solutes and pesticides, study of soil structural properties and infiltration behaviour of soils, investigation of flash floods in rivers, and hydrological modelling of the watersheds.     

Club convergence and spatial distribution dynamics of carbon intensity in China’s construction industry

Climate change caused by carbon emissions continuously threatens sustainable development. Due to China’s immense territory, there are remarkable regional differences in carbon emissions. The construction industry, which has strong internal industrial differences, further leads to carbon emission disparity in China. Policymakers should consider spatial effects and attempt to eliminate carbon emission inequality to promote the sustainable development of the construction industry and realize emission reduction targets. Based on the classic Markov chain and spatial Markov chain, this paper investigates the club convergence and spatial distribution dynamics of China’s carbon intensity in the construction industry from 2005 to 2014. The results show that the provincial carbon intensity in the construction industry is characterized by “convergence clubs” during the research period, and very low-level and very high-level convergence clubs have strong stability. Moreover, the carbon intensity class transitions of provinces tend to be consistent with that of their neighbors. Furthermore, the transition of carbon intensity types is highly influenced by their regional backgrounds. The provinces with high carbon emissions have a negative influence on their neighbors, whereas the provinces with low carbon emissions have a positive influence. These analyses provide a spatial interpretation to the “club convergence” of carbon intensity.     

Multivariate statistical analysis of the groundwater flow in shallow aquifers: a case of the basins of northern Algeria

Water resources in Algeria are mainly controlled by climate change which creates enormous problems in its planning, management and distribution. While the surface water resources are perfectly managed and operated by means of dams and small dams built for several years, the groundwater resources remain long unknown and unusable because of the lack of relevant working tools (e.g., methods, formulas, maps, etc.) for planners and engineers working in the field of water resources exploration. To highlight the hydrodynamic processes of groundwater in shallow aquifers of the basins of northern Algeria, we conducted a study using 81 subwatersheds collected from different locations at the basins; taking into account the climatic and geomorphological factors, to understand water usage trends, analyse patterns, tap good shallow aquifers and ensure long lasting supplies of water through arid periods, mapping and modelling of groundwater are fundamental to problem resolution. Multivariate statistical techniques as well as cluster and principal component analysis were applied to the data on groundwater flow, with the objective of defining the main controls on the groundwater flows at the basins. These statistical techniques showed the presence of three groundwater flow groups with increasing importance according to precipitation. The first group was mainly influenced by climatic factors, the second was more controlled by the communication between the surface and underground flows and the third group revealed the influence of geomorphological factors on groundwater flows.     

Numerical simulation of lifetime and time-dependent damage for granite by continuous and discontinuous approaches

In this study, the time-dependent damage process of granite is investigated utilizing two numerical simulation schemes based on continuous method and discontinuous method. Numerical creep tests are carried out with both simulation schemes and mechanical responses and fracture patterns of rock specimens are analyzed. The calibrated numerical models can successfully reflect the typical creep stages observed in the laboratory. The predicted lifetime is in accordance with the laboratory test data. Comparisons are made between the two simulation schemes. It is found that both schemes have unique features that can promote a genuine reflection of the time-dependent damage process of the brittle rocks.