Estimates of the turbulent kinetic energy budget in the oceanic convective boundary layer

The terms of the steady-state turbulent kinetic energy (TKE) budget in the oceanic convective boundary layer (CBL) are estimated by use of microstructure data obtained over the continental shelf of the East China Sea. The dissipation term is calculated from the micro-scale vertical shear of horizontal velocity measured directly using a freely-falling microstructure profiler, whereas the buoyancy flux and shear production terms are estimated indirectly by integrating vertically the one-dimensional conservation equation of density and by applying similarity theory, respectively. The transport term, calculated as the residual of the other three terms, vertically redistributes the TKE from the upper half of the CBL to the lower half, consistent with the TKE budgets in the atmospheric CBL and in shear-free and slightly-sheared CBLs simulated by large eddy-simulation models. The relatively large contribution of the transport term to the TKE budget shows that a local equilibrium form of the TKE equation is not appropriate for the TKE budget in the oceanic CBL.     

Investigation of cutting methods for small samples of Hayabusa and future sample return missions

We report the investigation of cutting methods for Hayabusa samples. The purpose of our study is to explore the possibility of applying multiple analyses to a single particle effectively. We investigated the cutting performance of a blade dicing saw, laser, focused ion beam (FIB), and physical breaking by microindenter. Cutting performance was examined by estimating the aspect ratio of the cut slit, i.e., depth over width of the slit. We also investigated the possible contamination and sample damage by cutting. The result of the investigation shows that we can cut the samples from <50 μm to 500 μm using those methods with aspect ratios from 10 to 20, although they would introduce some contamination or damage to the samples. Our investigations also provide an important basis for the analysis of samples obtained by future sample return missions.     

Three‐dimensional microstructure of samples recovered from asteroid 25143 Itokawa: Comparison with LL5 and LL6 chondrite particles

In this study, the three‐dimensional (3‐D) microstructure of 48 Itokawa regolith particles was examined by synchrotron microtomography at SPring‐8 during the preliminary examination of Hayabusa samples. Moreover, the 3‐D microstructure of particles collected from two LL6 chondrites (Ensisheim and Kilabo meteorites) and an LL5 chondrite (Tuxtuac meteorite) was investigated by the same method for comparison. The modal abundances of minerals, especially olivine, bulk density, porosity, and grain size are similar in all samples, including voids and cracks. These results show that the Itokawa particles, which are surface materials from the S‐type asteroid Itokawa, are consistent with the LL chondrite materials in terms of not only elemental and isotopic composition of the minerals but also 3‐D microstructure. However, we could not determine whether the Itokawa particles are purely LL5, LL6, or a mixture of the two. No difference between the particles collected from Rooms A and B of the sample chamber, corresponding to the sampling sequence of the spacecraft's second and first touchdowns, respectively, was detected because of the statistically small amount of particles from Room B.     

Earth Radioactivity Measurements with a Deep Ocean Anti-neutrino Observatory

We consider the detector size, location, depth, background, and radio-purity required of a mid-Pacific deep-ocean instrument to accomplish the twin goals of making a definitive measurement of the electron anti-neutrino flux due to uranium and thorium decays from Earth’s mantle and core, and of testing the hypothesis for a natural nuclear reactor at the core of Earth. We take the experience with the KamLAND detector in Japan as our baseline for sensitivity and background estimates. We conclude that an instrument adequate to accomplish these tasks should have an exposure of at least 10 kilotonne-years (kT-y), should be placed at least at 4 km depth, may be located close to the Hawaiian Islands (no significant background from them), and should aim for KamLAND radio-purity levels, except for radon where it should be improved by a factor of at least 100. With an exposure of 10 kT-y we should achieve a 25% measurement of the flux of U/Th neutrinos from the mantle plus core. Exposure at multiple ocean locations for testing lateral heterogeneity is possible.     

Characteristics of outer shelf water in the East China Sea

Water mass properties along cross-sections of the Kuroshio in the East China Sea (ECS) are investigated in detail. We used temperature, salinity and dissolved oxygen data from 2000 and 2002, together with historical temperature and salinity data from 1987 to 2004. Water properties were divided into two groups: high and low salinities or oxygen at temperatures warmer than 15 and 12 °C, respectively. We found the existence of outer shelf water W2, as defined by clear modes in frequency distributions of salinity and oxygen within various temperature segments. The outer shelf water was different from both Kuroshio Tropical Water (KTW) and coastal water. We mapped horizontal and vertical distributions of W2, along with W1 and KTW. The outer shelf water was distributed with density σ _t = 22.5–25.5 over a relatively broad area, from the outer continental shelf to the continental slope, particularly in autumn. Vertical distribution of the water suggests that W2 spread from the outer shelf to just the shelf side of the Kuroshio Current velocity maximum. Seasonal variations are examined with historical data along PN section over 17 years, and suggest that the appearance of W2 is distinct in summer and autumn. By comparing temperature–salinity (T–S) diagrams from Taiwan Strait and east of Taiwan, the outer shelf water (W2) originates from South China Sea Tropical Water (SCSTW), as suggested by Chen, J Geophys Res 110:C05012 (2005). The present study of the ECS clearly shows that SCSTW is transported along the east coast of Taiwan or through the Taiwan Strait into the ECS. It then spreads over a relatively wide area from the outer shelf to just the shelf side of the Kuroshio axis, and there is some horizontal mixing between SCSTW and KTW around the shelf break.     

Sylvite and halite on particles recovered from 25143 Itokawa: A preliminary report

We observed cross sectional ultra‐thin sections near the surface of 12 particles recovered from the S‐type asteroid Itokawa by the Hayabusa spacecraft in 2010, using spherical aberration–corrected STEM and conventional TEM. Although their mineralogy is almost identical to the equilibrated LL chondrites and therefore basically anhydrous, micrometer‐to‐submicrometer‐sized sylvite was identified on the surface of Itokawa particle RA‐QD02‐0034. Separately, micrometer‐sized halite was also identified on the surface of Itokawa particle RA‐QD02‐0129. Detailed inspection of the sample processing procedures at the JAXA's Planetary Materials Sample Curation Facility and textural observation of the sylvite and halite indicate that they were clearly present on two Itokawa particles before they were removed from Clean Chamber #2 at JAXA. However, there is no direct evidence for their extraterrestrial origin at present. If the sylvite and halite are extraterrestrial, their presence suggests that they may be more abundant on the surface of S‐type asteroids than previously thought.     

Observations of turbulence under weakly and highly stratified conditions in the Ariake Sea

Observations of turbulence, stratification, and mean current were made using a microstructure profiler and an acoustic Doppler current profiler (ADCP) during four cruises at a central location in the Ariake Sea, under weakly and strongly stratified conditions. Continuous measurements of the dissipation rate of turbulent kinetic energy (TKE), ε, were made. These revealed that frictional bed turbulence with quarterdiurnal variation in the bottom boundary layer (BBL) was one of the most energetic sources of vertical mixing in the sea. Thickness of the BBL was strongly confined by the stable stratification. We investigate a relationship between the BBL height h and the Ozmidov scale. We present a systematic argument that describes the vertical structure and characteristic scales of velocity and turbulence inside the frictional BBL, where the stratification persisted. Considerable deviation of observed vertical shear from the law of the wall indicated a modification of turbulent scales by the stratification. Shear stress calculated from the velocity data using vertical integration of the equation of motion was found to decrease approximately linearly with height. The TKE production rate P, estimated using the shear stress, was highly correlated with the dissipation rate. The buoyancy contribution to TKE balance in the BBL was quantified in terms of the flux Richardson number R _f as R _f?=?0.12.     

Horizontal distribution of calanoid copepods in the western Arctic Ocean during the summer of 2008

The horizontal distribution of the epipelagic zooplankton communities in the western Arctic Ocean was studied during August–October 2008. Zooplankton abundance and biomass were higher in the Chukchi Sea, and ranged from 3,000 to 274,000 ind. m^?2 and 5–678 g WM m^?2, respectively. Copepods were the most dominant taxa and comprised 37?94% of zooplankton abundance. For calanoid copepods, 30 species belonging to 20 genera were identified. Based on the copepod abundance, their communities were classified into three groups using a cluster analysis. The horizontal distribution of each group was well synchronized with depth zones, defined here as Shelf, Slope and Basin. Neritic Pacific copepods were the dominant species in the Shelf zone. Arctic copepods were substantially greater in the Slope zone than the other regions. Mesopelagic copepods were greater in the Basin zone than the other regions. Stage compositions of large-sized Arctic copepods (Calanus glacialis and Metridia longa) were characterized by the dominance of late copepodid stages in the Basin. Both the abundance and stage compositions of large copepods corresponded well with Chl. a concentrations in each region, with high Chl. a in the Shelf and Slope supporting reproduction of copepods resulting in high abundance dominated by early copepodid stages.     

Lagrangian motion of air parcels in the stratosphere in the presence of planetary waves

Development of thoughts on tracer transport mechanisms in the stratosphere which lead to new approaches to two-dimensional modeling of the tracer problem is reviewed.Three-dimensional motions of individual air parcels affected by a planetary wave are investigated theoretically, treating a steady, upward propagating wave in a uniform flow. It is shown that trajectories of air parcels are of elliptical form when projected onto the meridional plane and that they have no mean meridional or vertical motion, even though the usual zonal Eulerian-mean vertical motion exists. The origin of the difference between the mean air parcel motion and the Eulerian-mean motion is discussed.On the basis of the knowledge of air parcel motion, two approaches to two-dimensional modeling are considered. The generalized Lagrangian mean motion (quasi-zonal weighted mean taken over a meandering material tube), recently introduced by Andrews and McIntyre, is identical with the mean motion of an air parcel in a steady state. Such a mean meridional circulation may be used for advecting a tracer in the meridional plane in a two-dimensional model. The transport effect is represented solely by the advection and an eddy transport does not appear in this scheme, to a first approximation.The finding that trajectories of air parcels are elliptical necessitates a reexamination of the Reed-German eddy diffusivity currently used in two-dimensional chemical-dynamical models. By applying a mixing length type hypothesis, we derive an eddy diffusivity formula for use in Eulerian-mean calculations, which, in the case of a conservative tracer is dominated by an anti-symmetric tensor. The eddy transport due to this anti-symmetric tensor diffusivity is of advective type (not diffusive) and has the effect of taking the Stoke drift effect into account, when used in the usual Eulerian-mean formulation.     

Technical issues in modeling surface-drifter behavior on the East China Sea shelf

To investigate technical issues associated with the particle-tracking numerical models frequently used to reproduce the behavior of objects drifting in the actual ocean, the trajectories of satellite-tracked drifters released in 2003, 2004, and 2007 were reproduced using a numerical model. In particular, the wind stress driving the surface currents which carried the drifters has been computed using satellite-observed QuikSCAT/Seawinds data provided twice daily in conjunction with in-situ Ieodo-station wind data. Although it is difficult to reproduce the trajectory of a single drifter using numerical models because of the uncertainty induced by random-walk processes, the similarity between the modeled particle and observed buoy trajectories is statistically significant, except for the experiment in 2007. In general, the satellite-derived wind field modified using in situ data is likely to be able to reproduce observed drifter motion. However, it is found that the model is unable to reproduce drifter trajectories in windy 2007. The numerical modeling result demonstrates that wind-induced leeway drift prevails in drifter motion in 2007, in spite of the wind-resistant drogue attached to the drifters, and that this drift shows non-negligible spatiotemporal variability, suggesting that leeway drift is not simply proportional to wind speeds, as in previous studies have maintained.