鲜浒苔稀硫酸水解产糖工艺研究

分别用质量分数为0.6%、1.0%、1.4%、1.8%、2.2%的稀硫酸在121℃高温高压的条件下水解鲜浒苔30、60、90 min,浒苔水解残留物再用纤维素酶酶解,用DNS法测定上述各步骤中的还原糖产量。结果表明,浒苔总糖含量为67.2%。稀硫酸水解工艺中,硫酸质量分数为1.8%、水解90 min,浒苔还原糖转化率最高,达59.9%,每克干质量浒苔可产生447.0 mg还原糖。稀硫酸水解残留物纤维素酶酶解工艺中,浒苔还原糖转化率较低,在硫酸质量分数为0.6%、水解时间为60 min时还原糖转化率出现最大值,仅为6.5%。结果显示浒苔稀硫酸水解产还原糖效果显著,但并不能促进纤维素酶酶解。浒苔糖化可单独采用稀硫酸水解工艺,本实验条件下的最佳工艺条件为1.8%硫酸水解90 min。本研究探索了浒苔糖化工艺条件,对后续的浒苔燃料乙醇发酵研究具有一定的参考意义。     

Simulation of the extreme waves generated by typhoon Bolaven (1215) in the East China Sea and Yellow Sea

Record-breaking high waves occurred during the passage of the typhoon Bolaven (1215) (TYB) in the East China Sea (ECS) and Yellow Sea (YS) although its intensity did not reach the level of a super typhoon. Winds and directional wave measurements were made using a range of in-situ instruments mounted on an ocean tower and buoys. In order to understand how such high waves with long duration occurred, analyses have been made through measurement and numerical simulations. TYB winds were generated using the TC96 typhoon wind model with the best track data calibrated with the measurements. And then the wind fields were blended with the reanalyzed synoptic-scale wind fields for a wave model. Wave fields were simulated using WAM4.5 with adjustment of C_d for gust of winds and bottom friction for the study area. Thus the accuracy of simulations is considerably enhanced, and the computed results are also in better agreement with measured data than before. It is found that the extremely high waves evolved as a result of the superposition of distant large swells and high wind seas generated by strong winds from the front/right quadrant of the typhoon track. As the typhoon moved at a speed a little slower than the dominant wave group velocity in a consistent direction for two days, the wave growth was significantly enhanced by strong wind input in an extended fetch and non-linear interaction.     

从五台山下前寒武系变形特征论某些构造形迹的运动学意义

分布在五台山区的早前寒武纪五台群和滹沱群,遭受了多期变形和变质,小型构造发育。层理配置反映变形性质和程度;片理(劈理)为早世代挤压-剪切褶皱的轴面片理,又成为晚世代弯滑褶皱的滑动面;线理(压扁拉长的砾石、杏仁体和矿物集合体)垂直于早世代褶皱枢纽,为a线理;这一运动学特征在显微组构中亦有反映。本区发现了“折射变位”、“非共面反射变位”和“共面反射变位”等褶皱枢纽变位轨迹。上述构造形迹可为运动学分析提供依据,可对造山带的重要性质获得广泛的理解。     

L波段海水介电模型构建与误差分析

基于实验室测量数据,构建了盐度和温度多项式形式的L波段海水介电模型,并采用最小二乘法和奇异值分解技术求解模型系数。将新模型与目前广泛使用的Klein-Swift(KS)模型、Meissner-Wentz(MW)模型以及George Washington University(GWU)模型进行比较。结果表明：新模型计算的海水介电常数与实验室测量数据的RMSE误差为0.09（实部）和0.25（虚部）,均优于KS、MW、GWU模型。     

马尼希基海底高原重力均衡及其构造意义研究

采用三维导纳分析技术,联合海底地形和重力异常数据,对马尼希基海底高原重力均衡状况进行了分析研究,并结合地震学等研究成果,分析其构造意义。马尼希基海底高原海底地形与重力异常相干性在长波部分(大于100 km)相对较小,说明高原地壳底部存在低密度异常,并且,根据Airy均衡分析,这种低密度异常并非完全由洋壳对海底地形的均衡调整引起,推测高原地壳底部存在由岩装“板垫作用”(crustal under-plating)形成的低密度异常体,即“底部载荷”。马尼希基海底高原短波海底地形符合Airy均衡,据此分析获得高原地区洋壳厚度为22. 7 km,与地震研究结果一致。岩石圈挠曲均衡分析表明,马尼希基海底高原岩石圈有效弹性厚度为2.5-5.5 km,较优拟合值为3.5km,可能意味着高原形成时岩石圈年龄较小。根据顾及底部载荷的挠曲均衡模型进行分析,定量计算了底部载荷规模,约为地形载荷的30%,其体积约为9.3 X 105km3,平均深度为18 km,是整个高原洋壳的重要组成部分,表明洋壳底部板垫作用在马尼希基海底高原形成和演化过程中产生过重要影响。     

内蒙古克什克腾旗哲斯组沉积学和年代学研究及其古地理意义

为了重建西拉木伦河北部晚古生代沉积古地理格局并探讨古亚洲洋的闭合过程,本研究对克什克腾旗西部的哲斯组地层进行了详细的沉积环境与沉积相分析、锆石U-Pb年代学研究。来自哲斯组的凝灰质砂岩与安山岩样品的最年轻锆石组的谐和年龄为262±1Ma和258±17Ma,限定研究区内地层沉积下限为中晚二叠世。前人认为哲斯组地层为深海环境下的浊流沉积,本文研究表明哲斯组以近源快速堆积、快速沉降为特征,沉积环境为三角洲前缘相与前三角洲相的多次交替,同时受到火山活动的影响。通过详细的沉积岩野外剖面观察,区内地层并没有发现以单调的递变层理为特征的连续鲍马序列层序,而是出现从砂岩到粉砂岩或泥岩的不规则截然互层层序,并与巨厚层的滑塌堆积交替发育,表明研究区中二叠世古地理格局并不具备深海浊积扇的发育条件,也暗示中二叠世不存在向南发育的广阔大陆边缘;另一方面,结合古流向恢复和物源分析,哲斯组的沉积物应主要来自于南部的华北克拉通以及南造山带陆缘弧,说明研究区在中二叠世已与华北板块连通,并没有类似大洋俯冲带的阻隔作用。因此,研究区中二叠世古地理格局并不具备深海远源浊积扇的发育条件,而是处于近源快速堆积的伸展环境,中二叠世既不存在向南发育的广阔大陆边缘,也不存在代表板块边界的俯冲带。     

一种改进包模型的遥感图像检索方法

目的 提出了一种改进的包模型图像检索方法,使用本底图像构建视觉词汇字典。在建库过程中,通过近似KD-Tree搜索本底图像局部不变特征与入库图像特征间的对应匹配关系,并记录该关系;图像检索时,搜索检索图像与本底图像特征的对应关系,进而计算与入库图像的关系。该方法仅保存本底图像的局部不变特征,可实现感兴趣区域的图像检索。实验结果表明,该方法在提高图像检索准确性的同时,可以减少所需存储局部不变特征的数量。     

Removal rate and releases of polybrominated diphenyl ethers in two wastewater treatment plants,Korea

Wastewater treatment plants (WWTPs) play an important role in minimizing the release of many pollutants into the environment. Nineteen congeners in two WWTPs in Korea were determined to investigate the occurrence and fate of polybrominated diphenyl ethers (PBDEs) during wastewater treatment processes. The concentration of total PBDEs was 69.6 and 183 ng/L in influent, which declined to 1.59 and 2.34 ng/L in the final effluent, respectively (Tongyeong and Jinhae WWTPs). PBDEs were found to exist mostly in the particulate phase of wastewater, which rendered sedimentation efficient for the removal of PBDEs. BDE-209 was the predominant congener in the influent and sludge. Most of the PBDEs entering the WWTPs presumably ended up in the sludge, with < 2% being discharged with the final effluent. According to the mass loading estimation, every day 2.55–9.29 g PBDEs entered the two WWTPs, 2.8–10.4 g were disposed to landfill sites in sludge form and 0.06–0.12 g were discharged to the surrounding water through final effluent, respectively. Preliminary results indicated that the ecological risk to organisms in soil exposed to PBDEs through the usage of sludge application to agricultural land was relatively low. To our knowledge, this study is the first to report on the removal efficiency of PBDEs in a WWTP in Korea.     

Least Square Finite Element Method for Viscous Splitting of Unsteady Incompressible Navier–Stokes Equations

In order to solve unsteady incompressible Navier–Stokes(N–S) equations, a new stabilized finite element method,called the viscous-splitting least square FEM, is proposed. In the model, the N–S equations are split into diffusive and convective parts in each time step. The diffusive part is discretized by the backward difference method in time and discretized by the standard Galerkin method in space. The convective part is a first-order nonlinear equation.After the linearization of the nonlinear part by Newton's method, the convective part is also discretized by the backward difference method in time and discretized by least square scheme in space. C~0-type element can be used for interpolation of the velocity and pressure in the present model. Driven cavity flow and flow past a circular cylinder are conducted to validate the present model. Numerical results agree with previous numerical results, and the model has high accuracy and can be used to simulate problems with complex geometry.     

Projections of ocean climate for northwestern Pacific Ocean

The long-term adjustment processes of atmosphere and ocean in response to gradually increased atmospheric CO2 concentration have been analyzed in 70 and 140a integrations with NCAR fully-coupled climate system model (CSM). In these experiments the CO2 concentration has been increased to double and quadruples the initial concentration, respectively. After 70a, at the time of CO2 doubling, the model predicts surface air temperature rises by 1.2 and 1.5K for the globe and the northwestern Pacific Ocean, respectively. The behavior of the quadrupling run is similar: each global and regional mean surface air temperatures increase by 2.8 and 3.0K at the time of CO2 quadrupling. From the experiments, surface air temperature changes in the northwestern Pacific Ocean will be more distinctive compared with the global average, mainly due to exceptionally large warming and sea level change near the entrance of the Kuroshio extension.