近500年中国及邻区强震空间格局及迁移模式初步分析

介绍了中国及邻区地震目录数据库的开发状况，从历史强震、近代强震及强震震源深度等几个方面，结合我国及邻区板块构造以及应力状态、壳幔结构的东西部差异对我国强震的空间格局进行了较为系统的分析．公元1900年以前我国华北地区的强震呈现出大梯形格局，而公元1900年之后我国强震则以西部的巨大扇形为主要特征，其中震源深度最深的区域分别位于大扇形的2个顶点处，即兴都库什-帕米尔以及缅印交界地区．就我国强震所特有的空间分布格局对我国强震的线性以及区域性迁移模式进行了总结和分析，其中线性迁移模式又可细分为前进跳跃式和钟摆式．对文中涉及的强震迁移机制分别利用断层破裂、弹簧-滑块、壳幔的结构性差异以及它们之间的相对运动等模型进行了初步的解释．     

可可西里——东昆仑活动构造带强震活动研究

青海昆仑山口西 8.1级地震发生在具有新生性特征的可可西里—东昆仑活动断裂带上。该断裂带在 190 0年以来的 10 0多年中经历了一个强震活动过程。在该强震活动过程中 ,地震沿整个可可西里—东昆仑活动构造带分段破裂 ,强震的破裂长度和震级之间大致满足对数线性的统计关系 ,强震活动呈现指数型时间分布的加速特征。这种强震加速活动特征可以用含多个震源体的孕震系统的强震成组活动模型给予解释。     

电子探针化学测年方法

介绍含Th U Pb矿物电子探针化学测年方法的基本原理 ,并利用应用实例说明该方法在研究岩石形成年龄、构造热事件年代等方面的重要作用 ,最后简要评价该方法的优、缺点 ,并指出它的应用前景 ,认为电子探针化学测年方法将有可能在深源岩石包体年龄研究、含放射性元素矿床形成年代研究等方面大有作为 ,并使地质年代学研究更加精细化 ,有助于深入探讨复杂地质事件及其演化历程。     

华北地台和秦岭—大别—苏鲁造山带的中生代花岗岩与深部地球动力学过程

近年来的研究证实 ,华北地台和大别—苏鲁造山带的中生代花岗岩与同时代的镁铁质超镁铁质岩有类似的Sr、Nd同位素特点 ,许多花岗岩和火山岩还具有类似埃达克岩的地球化学性质。在此基础上 ,根据现已积累的大量Sr、Nd同位素资料 ,从整个华北地台岩石圈的角度论证了中生代岩石圈地幔富集的性质、富集地幔发生的时代及其形成机制 ,进而探讨了岩浆活动的动力学机制 ,指出本区岩石圈富集地幔的形成是在Pangea超大陆裂解时岩石圈大规模拆沉减薄 ,被拆沉的太古宙古老地壳重循环进入地幔改变了地幔成分所致 ,说明超大陆裂解、岩石圈大规模拆沉减薄和富集地幔形成之间有密切的成因联系 ,超大陆裂解伴随着大陆地壳生长和消亡 (重循环 )的大体平衡。结合全球地震层析资料 ,进一步探讨了由俯冲大洋残片转化的下地壳同古老克拉通地壳物质在花岗岩源区中的重要意义。     

俯冲-增生型造山带增生楔流体研究进展

俯冲－增生型造山带弧前增生楔流体的特点为：盐度低、氯化物含量异常低，并含有丰富的CO2和CH4。流体以扩散式或沿断层带渠道式活动；泥火山、张裂隙充填脉、碳酸盐壳、深海生物群是流体活动的直接体现；流体活动影响着增生楔的内部结构和构造样式；增生楔中流体活动特征的研究对研究造山带的地质演化及矿床成因具有重要意义。     

A numerical method of viscoelastic finite element coupled with spring-block model to simulate the interaction of faults and crustal blocks

A numerical method of viscoelastic finite element coupled with spring-block model is developed to study temporal processes from the slow tectonic motion of large-scale crust to the rapid failure of small-scale faults. Our modeling demonstrates that the motion of crustal blocks is driven by forces from tectonic plate boundaries, and the deformation is distributed on faults for the stress accumulating. The coupling model generates earthquake sequences that display a magnitude-frequency scaling consistent with Gutenberg-Richter law. The frictional heterogeneities affeci earthquakes occurrence and stresses distribution of crustal blocks. Rupture of earthquakes starts at the nucleation node, and propagates bilaterally along faults with the stress triggering, release and redistribution. The failure of faults releases part of crustal stresses, the stress state of crustal blocks near fault is affected by the rupture of local segments on the fault, and the stress state of crustal blocks far away from the fault is controlled by the seismic activity of the whole fault.     

Application of extended distinct element method with lattice model to collapse analysis of RC bridges

This paper proposes a simple lattice model for collapse analysis of RC bridges subjected to earthquakes by using the extended distinct element method (EDEM). In the model, a concrete element consists of lumped masses connected to one another by springs, and a reinforcement bar is represented by a discrete model or an integrated model. The proposed lattice model is simple but its parameters are reasonably defined. It has fewer element nodes and connecting springs, which will be of benefit by shortening the CPU time. The processes to determine the initial stiffness of concrete and steel springs, the parameters of the constitutive model and the fracture criteria for springs are described. A re‐contact spring model is also proposed to simulate the re‐contact of the concrete after fracture of springs; and a general grid searching method is used to decrease the CPU time for judging re‐contact after fracture. The lattice model is assessed by numerical simulations and experiments. As an application, a damaged single‐column pier subjected to the Kobe Earthquake in 1995 is analysed by EDEM with the proposed model. The simulation results indicate that the proposed model predicts well qualitatively the collapse process of RC bridges. Copyright © 2003 John Wiley & Sons, Ltd.     

CDP mapping in tilted transversely isotropic (TTI) media. Part I: Method and effectiveness

Transverse isotropy with a tilted axis of symmetry (TTI) causes image distortion if isotropic models are assumed during data processing. A simple anisotropic migration approach needs long computational times and is sensitive to the signal-to-noise ratio. This paper presents an efficient, general approach to common-depth-point (CDP) mapping to image the subsurface in TTI media from qP-wave seismic data by adding anisotropic and dip parameters to the velocity model. The method consists of three steps: (i) calculating traveltimes and positions of the CDP points; (ii) determining CDP trajectories; (iii) CDP imaging. A crucial step is the rapid computation of traveltimes and raypaths in the TTI media, which is achieved by the Fermat method, specially adapted for anisotropic layered media. The algorithm can image the subsurface of a given model quickly and accurately, and is suitable for application to a bending reflector. The effectiveness of the method is demonstrated by comparing the raypaths, the traveltimes and the results of CDP mapping, when assuming isotropic media, transversely isotropic media with a vertical axis of symmetry (TIV), and TTI media.     

GPS网数据处理几个问题

本文指出在GPS网平差中有关精度评定、权的确定以及坐标转换所产生的控制点间隙等存在问题，供研究讨论。     

基于DEM的河流多尺度显示研究

进行了基于DEM的河流多尺度显示方法的研究和试验。采用斯特拉勒算法对河流线进行分级,通过DEM提取河流的高差、集水面积等属性信息,并以此为基础提出了对河流的主支流的自动判别的方法,最终以国家基础地理信息的全国1∶25万数据库为数据源实现了实验区域河流的多尺度显示。