从成岩-蚀变特征探讨塔深1井白云岩储层成因

塔深1井钻遇的寒武系地层属于中寒武统阿瓦塔格组和上寒武统丘里塔格下亚群。阿瓦塔格组以灰色-深灰色粉晶-细晶藻白云岩为主,丘里塔格下亚群以灰色-浅灰色晶粒结构白云岩与残余亮晶结构白云岩为主。藻白云岩在阴极发光下以明亮的中等强度砖红色-桔黄色为主要特点,具有相对偏重的δ18O值(-6.3‰~-4.5‰,平均为-5.3‰,VPDB)、相对较高的稀土总量以及与正常海相碳酸盐岩相似的稀土配分样式。晶粒白云岩与残余亮晶结构白云岩在阴极发光下以偏暗的中等强度蓝紫色-砖红色为主要特点,具有相对偏轻的δ18O值(-9.2‰~-5.7‰,平均为-7.5‰,VPDB)、相对偏低的稀土总量、Eu正异常与重稀土明显亏损为特点的稀土配分模式。阿瓦塔格组和丘里塔格下亚群白云岩在上述岩石学特征和地球化学特征上的差异表明储层发育的成岩-蚀变过程存在差异。研究认为,埋藏较深的阿瓦塔格组优质储层的形成受多种因素控制,其中准同生期大气淡水作用下石膏结核的溶解及非稳定碳酸盐矿物的溶解奠定了基础,后期成岩改造及流体作用进行了强化,局部遭充填破坏。     

Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.     

Numerical analysis of effect of baffle configuration on impact force exerted from rock avalanches

In mountainous areas, channelized rock avalanches swarm downslope leading to large impact forces on building structures in residential areas. Arrays of rock avalanche baffles are usually installed in front of rigid barriers to attenuate the flow energy of rock avalanches. However, previous studies have not sufficiently addressed the mechanisms of interaction between the rock avalanches and baffles. In addition, empirical design approaches such as debris flow (Tang et al., Quat Int 250:63–73, 2012), rockfall (Spang and Rautenstrauch, 1237–1243, 1988), snow avalanches (Favier et al., 14:3–15, 2012), and rock avalanches (Manzella and Labiouse, Landslides 10:23–36, 2013), which are applied in natural geo-disasters mitigation cannot met construction requirements. This study presents details of numerical modeling using the discrete element method (DEM) to investigate the effect of the configuration of baffles (number and spacing of baffle columns and rows) on the impact force that rock avalanches exert on baffles. The numerical modeling is firstly conducted to provide insights into the flow interaction between rock avalanches and an array of baffles. Then, a modeling analysis is made to investigate the change pattern of the impact force with respect to baffle configurations. The results demonstrate that three crucial influencing factors (baffle row numbers, baffle column spacing, and baffle row spacing) have close relationship with energy dissipation of baffles. Interestingly, it is found that capacity of energy dissipation of baffles increases with increasing baffle row numbers and baffle row spacing, while it decreases with increasing baffle column spacing. The results obtained from this study are useful for facilitating design of baffles against rock avalanches.     

Spatial and temporal analyses of air pollutants and meteorological driving forces in Beijing–Tianjin–Hebei region,China

Due to its negative impact on the living environment of human beings, ambient air pollution has become a global challenge to human health. In this study, surface observations of six criteria air pollutants, including PM_2.5, PM₁₀, SO₂, NO₂, CO and O₃, were collected to investigate the spatial and temporal variation in the Beijing–Tianjin–Hebei (BTH) region during 2013–2016 and to explore the relationships between atmospheric pollutants and meteorological variables using quantile regression model (QRM) and multiple linear regression model (MLRM). The results show that BTH region has experienced significant air pollution, and the southern part generally has more severe conditions. The annual average indicates clear decreasing trends of the particulate matters, SO₂ and CO concentrations over the last 4 years and slight increasing trends of NO₂ and O₃ in several cities. The seasonal and monthly characteristics indicate that the concentrations of five species reach their maxima in the winter and their minima in the summer, whereas O₃ has the opposite behaviour. Finally, the pseudo R² values show that the QRMs have the best performance in the winter, followed by spring, fall, and summer. Specifically, all the meteorological factors have significant impacts on air pollution but change with pollutants and seasons. The MLRM results are generally consistent with the QRM results in all seasons, and the inconsistencies are more common in the fall and winter. The results of this research provide foundational knowledge for predicting the response of air quality to climate change in the BTH region.     

A nonlinear multiparameter prestack seismic inversion method based on hybrid optimization approach

Multiparameter prestack seismic inversion is one of the most powerful techniques in quantitatively estimating subsurface petrophysical properties. However, it remains a challenging problem due to the nonlinearity and ill-posedness of the inversion process. Traditional regularization approach can stabilize the solution but at the cost of smoothing valuable geological boundaries. In addition, compared with linearized optimization methods, global optimization techniques can obtain better results regardless of initial models, especially for multiparameter prestack inversion. However, when solving multiparameter prestack inversion problems, the application of standard global optimization algorithms maybe limited due to the issue of high computational cost (e.g., simulating annealing) or premature convergence (e.g., particle swarm optimization). In this paper, we propose a hybrid optimization-based multiparameter prestack inversion method. In this method, we introduce a prior constraint term featured by multiple regularization functions, intended to preserve layered boundaries of geological formations; in particular, to address the problem of premature convergence existing in standard particle swarm optimization algorithm, we propose a hybrid optimization strategy by hybridizing particle swarm optimization and very fast simulating annealing to solve the nonlinear optimization problem. We demonstrate the effectiveness of the proposed inversion method by conducting synthetic test and field data application, both of which show encouraging results.     

Geochemistry of organic matter and elements of black shale during weathering in Northern Guizhou,Southwestern China: Their mobilization and inter-connection

Different from previous studies on effect of weathering upon geochemical variation along a single weathered profile, this paper provides a new methodology validated by comparing a weathered outcrop samples and their stratigraphic counterpart un-weathered core samples in a nearby shallow borehole. This outcrop and borehole penetrated the Ordovician-Silurian Wufeng–Longmaxi shales, located in the same anticline structure in the northern part of Guizhou Province, Southern China. The mineral composition, major, trace and rare earth elements (REEs) composition and Rock-Eval parameters of outcrop and core samples were analyzed and compared. Organic matter (OM) was observed in the microscope and extracted for elements analysis. The results show that short-term weathering still has significant influence on OM, mineral and elemental composition of black shales. The elements composition shows the outcrop profile was moderately weathered. The REEs compositions do not alter much during weathering process and the REEs composition and their relative ratios still are valid for rock origin determination. The OM, mainly composed by graptolite and bitumen, even entering the highly-over thermal maturity, is still sensitive to the weathering with a systematic loss 30–50% of TOC along the outcrop profile, which suggests that the OM consumption is predominantly controlled by weathering duration and the distance from the weathering surface. In turn, OM has significant influence on the trace elements transportation behavior during weathering. Some trace elements associated with the OM such as V, Cr, Th, U, Ni and Co, change significantly in their absolute concentration during weathering, but their relative ratios do not necessarily change too much and might be still reliable proxies for paleo-environmental determination. The mobility of shale minerals during weathering is in the following order: plagioclase?>?potassium feldspar and dolomite >pyrite and OM. Short-term weathering can also result in considerable transportation of elements and significant variation of minerals content in black shale, which may pose potentially high environmental and engineering risk in the regions rich in black shale.     

巴音戈壁盆地南部塔木素铀矿床水岩作用特征及其与铀成矿关系研究

在较封闭的环境中,塔木素铀矿床高矿化度(平均矿化度为35.4 g/L)NaCl型地下水中的Na+替换了斜长石中的Ca2+,使斜长石由更长石(An≈13)转变为钠长石(An≈1),被替换出的Ca_2+(以CaO计,约占斜长石总质量的4.5%)与地下水中的HCO_3~-、CO_3~(2-)及Mg~(2+)等结合形成了白云石等碳酸盐胶结物。在此过程中发生了脱碳作用,促使地下水中以[UO_2(CO_3)_3]~(4-)、[UO_2(CO_3)_3]~(2-)等碳酸铀酰络合离子及Mg CO_3·Na_2UO_2(CO_3)_2复盐发生分离而形成了铀的沉淀,并受扩散作用影响,水中的铀趋向于向水岩作用相对强烈地段迁移,从而促使铀在特定的层位集中、富集。同时,斜长石因水岩作用(溶解、溶蚀等),在解理面及表面形成了次生的缝隙及孔洞等,为铀沉淀提供了空间。成岩后,含SO_4~(2-)等的酸性地表水沿层间下渗,溶解了砂岩中碳酸盐胶结物而形成了溶洞,为后期再次迁移的铀提供了沉淀空间,并形成了铀的进一步叠加、富集。     

车排子凸起与沙湾凹陷过渡带的构造模型

车排子凸起位于准噶尔盆地扎伊尔山前,是夹持在南部四棵树凹陷和东部沙湾凹陷之间的三角构造带。然而对这个三角构造带是原地掩伏构造,山前推覆构造,还是走滑构造控制形成的认识存在争议。目前对于车排子凸起与沙湾凹陷过渡带的构造变形特征以及变形机制的认识尚不清楚。而过渡带是研究该区构造变形与演化的良好区域,精细研究该区域构造几何学与运动学对于揭示其构造变形机制以及认识盆山之间的关系具有积极作用,并对于该区油气勘探具有重要意义。本文以研究区的连片三维地震资料为基础,运用不整合面识别、轴面分析及平衡剖面等方法,对车排子凸起与沙湾凹陷过渡带进行精细的构造解析、建模与构造复原。研究表明,过渡带发育下二叠统（P₁j-P₁f）,中二叠统（P₂x-P₂w）,上二叠统（P₃w）,三叠系（T）,侏罗系（J）,白垩系（K）与古近系-第四系（E-Q）7个构造变形层序。发育佳木河组底部及石炭系内部滑脱层。深部（前二叠系）构造楔发育于整个过渡带,其个数和几何学形态的变化直接影响了上覆背斜形态。构造楔在早二叠世开始楔入,挤压作用持续至三叠纪末期。晚三叠世发育生长地层,显示了P-T构造层褶皱变形的时间,随后三叠纪末期,过渡带受到来自西北缘造山带方向的逆冲推覆构造的叠加作用,表现在后缘发育一系列叠瓦构造,推覆距离约为8 km,南部逆冲断层上盘二叠系-三叠系被剥蚀完全,北部残余少量下二叠统佳木河组。