Deterioration mechanisms of tuffs in Midas monument

Slightly weathered white and pink tuffs of the Midas monument have deterioration problems. In this study, depths and characteristics of the weathering zones developed within the tuffs are investigated through optical microscopy, X-ray diffractometry (XRD), chemical analyses, scanning electron microscopy (SEM) and some index parameters. Accelerated weathering tests including wetting–drying, freezing–thawing and salt crystallization are performed, and durability assessment methods are used to predict the durabilities of the tuffs. The findings are compared with field observations. By examining quantitative weathering indices and comparing them with thin section studies, it is found that thin section analyses of the crystals, LoI, and WPI are good indicators to quantify the depth of weathering for the tuffs. However, thin section studies have limited value for fine-grained tuffaceous matrix. The chemical weathering of the tuffs produces weathered zones that are 4.5-cm thick within the white tuff and 2.5-cm thick within the pink tuff. Physical weathering causes scaling of outer layers of the tuffs and fracturing of feldspars along their cleavage planes. However, variations of the index properties of the tuffs due to weathering are not so significant to quantify the weathering depths in the tuffs. Among the accelerated weathering tests, salt crystallization is found to be the most destructive environmental condition. Pigeon droppings rich in NO₃¹⁻ are found to be the main source of soluble salt at the Midas monument. The salt transported up by capillary rise due to surface water causes spalling of the tuffs in the capillary zone. Surface water and salt of any kind in the close vicinity of the monument should be totally eliminated for the purpose of conservation. Field observations and the durability equations reveal that the white tuff is less durable than the pink tuff. Wet-to-dry strength ratio yields a better stone durability assessment among various durability methods used in this study.     

Performances of Reverse Osmosis Membranes for Treatment of Olive Mill Wastewater

In the following study, two methods were employed in which olive mill wastewaters were treated by using reverse osmosis membranes (BW30 and XLE). In the first, wastewater was centrifuged and then passed through the reverse osmosis whereas in the second, an ultrafiltration was placed between the centrifuge and the reverse osmosis. The reverse osmosis experiments were conducted under 10, 15, 20, and 25 bar. The chemical oxygen demand (COD) removal efficiencies under 25 bar were found to be 97.5% for both BW30 and XLE membranes. The highest conductivity removal rates obtained under 25 bar for BW30 and XLE membranes were found to be 95.6 and 96.2%, respectively. As for the highest permeation flux values obtained under 25 bar, they were separately determined for BW30 and XLE as 15.3 and 21.2 L m^?2 h^?1, respectively. The performances of the membranes were also evaluated in terms of their mass transfer coefficients. According to this, all mass transfer coefficients were found to be <1 and also in proximate to one another; this clearly reflects the results as COD and conductivity removals were approximate and there was a lack of any significant difference, whether ultrafiltration was applied or not.     

Unsaturated characteristics of undisturbed expansive shale from Saudi Arabia

The aim of this paper is to evaluate the soil water characteristic curves (SWCC) of undisturbed expansive shale identified at different locations of Kingdom of Saudi Arabia. The SWCCs were evaluated for suction ranging from 0.5 to 400 MPa. Based on test results, all SWCCs reveal a bimodal curve indicating the presence of two distinct pore size distributions referred to as small and large micropores. Volume change measurements were performed to evaluate void ratio–suction relationships which confirmed the expansive nature of shale. Similarities between measured SWCCs and void ratio–suction relations developed for expansive shale originating from same geological formation suggests the impact of geological and environmental conditions on the unsaturated behavior of shale samples. Finally, a modified approach based on Mckeen’s classification methodology was proposed to assess the swelling potential using bimodal SWCCs. The modified approach was used to assess the relative contribution of different micropores on the swelling potential of shale.     

A new approximation in determination of zonation boundaries of ignimbrite by ground penetrating radar: Kayseri,Central Anatolia,Turkey

Ground penetrating radar (GPR) method is used as a tool to identify the zonation boundaries in ignimbrite series through their columnar section. Ignimbrites can be classified in terms of welding degree, colour, texture and mineralogical compositions. The research area comprises a part of İncesu (Kayseri) ignimbrite at Central Anatolia, Turkey. This ignimbrite is divided into three levels and each level has clear differences in terms of macroscopic and microscopic views. This paper presents the results of an application of GPR for the determination of zonation boundary within the ignimbrite flow unit in the view of their textural and petrological features. RAMAC CU II equipment was used with 250 MHz shielded antenna on parallel ten profiles to observe the physical difference among the ignimbrite levels of the study area. Two levels out of three have been defined at the İncesu ignimbrite and supported by field geology and petrographical studies. The first level, which is extremely fractured structure, is about 1.5 m thick and matches with middle level of the İncesu ignimbrite. The second level has an average 50–75 cm thickness and matches with lower level of the ignimbrite. In this manner, vertical lithological variations should be taken into consideration during petrological investigation of the ignimbrites.     

The 73-day periodicity of the flare index during the current solar cycle 22

The flare index of the current solar cycle 22 is analysed to detect periodicities. Power spectral analysis of the time series of solar flare index data reveals a periodicity around 73 and 53 days. We find that a periodicity of 73 days was in operation from November 1988 to the end of December 1991. We also find that when the 73-day periodicity or the 154-day periodicity is in operation the flare index is well correlated with the relative sunspot numbers.     

Periodic behavior of solar flare index during solar cycles 20 and 21

Short-term periodicities of solar activity were studied with the flare index by using Discrete Fourier Transform for the time interval 1966–1986. Two noticeable periodicities (18.5 and 5 months) have been found. The existence of these periodicities comparing with the early findings is discussed.     

On the short term variations of solar activity during solar cycle 21

Short-term variations of the last solar activity cycle were studied by the flare and coronal indices using Gleissberg method. Systematic short-term variations are found from their course during the 21st solar activity cycle. Comparison of their autocorrelograms constructed by the new set of data obtained from the magnitude of the fluctuations showed us the existence of the phase shift between the temporal variations of the two indices.     

Seismotectonic database of Turkey

Turkey is located in one of the most seismically active regions in the world. Characterizing seismic source zones in this region requires evaluation and integration of geological, geophysical, seismological and geodetical data. This first seismotectonic database for Turkey presented herein was prepared, under the framework of the National Earthquake Strategy and Action Plan—2023. The geographic information system (GIS)-based database includes maps of active faults, catalogues of instrumental and historical earthquakes, moment tensor solutions and data on crustal thickness. On the basis of these data, 18 major seismotectonic zones were delineated for Turkey and the surrounding region. The compilation and storage of the seismotectonic data sets in a digital GIS will allow analyses and systematic updates as new data accrete over time.