A shipborne- type wave-height meter for oceangoing vessels, using microwave Doppler radar

A wave-height meter using a simple microwave Doppler radar,simeq10mW in power and 10.525 GHz in frequency, is proposed so that we can measure oceanic waves effectively while the ship is steaming. It was first applied to the measurement of the variation of water level generated in a wave tank, which suggested that it is adequately applicable to the measurement of oceanic waves. A field test was carried out off the cape of Nojimazaki by installing the Doppler radar 5 m above the sea level at the bow of the ship. The result agreed reasonably well with that measured simultaneously by the ultrasonic wave-height meter installed at the same position. Another test is running successfully on a larger ship with the wave-height meter installed at 9 m above the sea level. The significant wave height measured by the present meter is being compared with that observed visually by the navigation officers.     

Preliminary organic petrography of Palaeozoic rocks from the Grand Banks,Newfoundland

Samples of lower Palaeozoic bedrock from the Grand Banks of Newfoundland were examined using reflected light microscopy and Rock-Eval pyrolysis. These samples contained organic material which included bitumen (structureless organic material), acritarchs, chitinozoa, scolecodonts and graptolites. The reflectance of the organic material increased from acritarchs towards graptolites with bitumen showing a wide range of reflectance. Multiple phases of oil migration through one sample were inferred by examination of the bitumens: the lowest reflecting being more recent than the highest reflecting bitumen. Combined reflectance and Rock-Eval analysis indicate that these samples are mature to overmature. The two oldest samples (Arenig-Llanvirn, Ordovician) are assessed as mature and as having potential for generation of liquid hydrocarbons, but must be considered as mainly gas prone.     

Readout Techniques for Drift and Low Frequency Noise Rejection in Infrared Arrays

Three different methods are presented to subtract thermal drifts and low-frequency noise from the signal of infrared array. The first is dead pixels with open Indium bumps, the second is reference output as implemented on the Hawaii2 multiplexer, and the third is dark pixels to emulate reference cells having a capacity connected to the gate of the unit cell field-effect transistor (FET). The third method is the most effective and yields a reduction in readout noise from15.4–9.4 erms. A novel method will be described to extend this readout technique to the Aladdin 1 K × 1 K InSb array. This revised version was published online in July 2006 with corrections to the Cover Date.     

The interannual leading modes of the extratropical variability in the Southern Hemisphere simulated by the ECHAM-4 atmospheric model

 An ensemble of twenty-three 14-year experiments conducted with the ECHAM-4 GCM has been examined to test the model's capability to simulate the principal modes of interannual variability. The integrations were performed under specified monthly SST between 1979–1993. The analysis was focused on the Southern Hemisphere (SH) extratropics. Empirical orthogonal functions analysis (EOF) using seasonal anomaly fields has been performed to isolate the principal modes that dominate the southern extratropical variability at the interannual time scale. Leading patterns of 500 hPa geopotential height (z500) have been compared with those estimated from the ECMWF re-analysis dataset. The model is able to adequately reproduce the spatial pattern of the annular mode, but it represents the temporal variations of the oscillation less satisfactorily. The model simulation of the Pacific South American (PSA) pattern is better, both in the shape of the pattern and in the temporal evolution. To verify if the capability of the model to adequately simulate the temporal oscillation of the propagating patterns is related to the increased influence of the tropical external forcing, covarying SST-atmospheric modes have been identified by singular value decomposition (SVD). In winter (July-August-September, JAS) the tropical SST variability is highly correlated with the ENSO mode. In summer (January-February-March, JFM) the strength of the teleconnections is related to strong westerly anomalies, disrupted by a meridional out of phase relation near to South America. The large size of the ensemble was exploited by comparing the time-varying model spread and degrees of freedom of the simulated extratropical circulation. Results show that when the extratropical circulation has a few degrees of freedom, the reproducibility is relatively low and the ensemble is governed by a fairly robust zonally symmetric structure of dispersion. Received: 9 May 2000 / Accepted: 30 January 2001     

Long-term seismicity of Istanbul and of the Marmara Sea region

We examine the long-term seismicity of the Marmara Sea region in Turkey over a period of twenty centuries to attempt to answer two questions: (1) how well recorded in history is the earthquake activity of this region? and (2) does seismicity over this long period of time differ from that over the present century? We study this densely-populated and fast-developing region because it is one of the most tectonically active regions on the continents that appears today to be relatively quiescent.     

The middle pleistocene deposits of Waverley Wood Pit,Warwickshire, England

A complex of channels underlying the Baginton-Lillington Gravel (Baginton Formation) at Waverley Wood Quarry, Warwickshire is described. Fossil pollen and plant macrofossils, Coleoptera, Ostracoda, Mollusca and Mammalia are described from the channel-fill deposits. Consideration of all the evidence allows the identification of four separate stages of channel fill which largely occurred under a cool temperate climate. At the top of Channel 2 evidence for a cold, continental climatic episode can be recognised, suggesting that the whole complex was deposited under a fluctuating climate at the end of a temperate stage. At two levels in the channels human artefacts were recovered confirming the presence of Palaeolithic people in Warwickshire during the deposition of the sediments. Amino-acid geochronology suggests an age within the ‘Cromerian Complex’ Stage for the channels. The small vertebrate and molluscan faunas indicate that the deposits are no older than the latter part of the ‘Cromerian Complex’ Stage of East Anglia. The regional stratigraphic significance of the Waverley Wood succession is outlined.     

Cathodoluminescence imaging and titanium thermometry in metamorphic quartz

Cathodoluminescence (CL) of quartz from metamorphic rocks representing a range of conditions from the garnet grade to the migmatite grade reveals a variety of textures, that is, a function of metamorphic grade and deformation history. Ti concentrations, determined by electron microprobe and ion microprobe, generally correlate with CL intensity (blue wavelengths), and application of the Ti‐in‐quartz thermometer (TitaniQ) reflects the temperature of quartz growth or recrystallization, and, in some settings, modification by diffusion. Quartz from garnet grade samples is not visibly zoned, records temperatures of 425–475 °C, and is interpreted to have recrystallized during fabric formation. Quartz grains from staurolite grade samples are zoned in CL with markedly darker cores and brighter rims, some of which are interpreted to have been produced by the dominant staurolite‐producing reaction, whereas others are interpreted as having formed by diffusion of Ti into quartz rims. Quartz from the matrix of kyanite and sillimanite grade samples are generally unzoned, although locally displays slightly brighter rims (higher Ti); quartz inclusions within garnet and staurolite have distinctly brighter rims, which are interpreted as having been produced by diffusive exchange with the host mineral. Quartz from migmatite grade samples displays highly variable CL intensity, which is dependent on the location of the grain. Matrix grains in melanosomes are largely unzoned or rarely zoned with darker cores. Leucosome quartz is strongly zoned with bright cores and dark rims and is interpreted as having formed during crystallization of the melt. Locally within the leucosome is observed oscillatory‐zoned quartz, which is interpreted as a subsolidus recrystallization to achieve strain relaxation. Quartz inclusions within garnet or plagioclase crystals often show bright domains separated by zones of dark CL. These enigmatic textures possibly reflect local melting fluxed by fluid inclusions. Temperatures calculated from the Ti–in–quartz thermometer are a function of the metamorphic grade of the sample, the textural setting of the quartz, the reaction history and the deformation history of the rock. The TitaniQ temperatures can be used to constrain the conditions at which various metamorphic processes have occurred.     

Late Quaternary vegetation changes around Lake Rutundu,Mount Kenya,East Africa: evidence from grass cuticles,pollen and stable carbon isotopes

Woody, subalpine shrubs and grasses currently surround Lake Rutundu, Mount Kenya. Multiple proxies, including carbon isotopes, pollen and grass cuticles, from a 755‐cm‐long core were used to reconstruct the vegetation over the past 38 300 calendar years. Stable carbon‐isotope ratios of total organic carbon and terrestrial biomarkers from the lake sediments imply that the proportion of terrestrial plants using the C₄ photosynthetic pathway was greater during the Late Pleistocene than in the Holocene. Pollen data show that grasses were a major constituent of the vegetation throughout the Late Pleistocene and Holocene. The proportion of grass pollen relative to the pollen from other plants was greatest at the last glacial maximum (LGM). Grass cuticles confirm evidence that C₄ grass taxa were present at the LGM and that the majority followed the cold‐tolerant NADP‐MEC₄ subpathway. Copyright © 2003 John Wiley & Sons, Ltd.     

Deformation styles as a key for interpreting glacial depositional environments

Lithostratigraphical and lithofacies approaches used to interpret glacial sediments often ignore deformation structures that can provide the key to environment of formation. We propose a classification of deformation styles based on the geometry of structures rather than inferred environment of formation. Five styles are recognised: pure shear (P), simple shear (S), compressional (C), vertical (V) and undeformed (U). These dictate the first letter of the codes; the remaining letters conveying the evidence. This information can be used to reconstruct palaeostress fields and to infer physical properties of sediments when they deformed. Individual structures are not diagnostic of particular environments but the suite of structures, their relative scale, stratigraphical relationships, and orientation relative to palaeoslopes and to palaeoice‐flow directions can be used to infer the environment in which they formed. This scheme is applied at five sites in west Wales. The typical succession is interpreted as subglacial sediments overlain by meltout tills, flow tills and sediment flows. Paraglacial redistribution of glacial sediments is widespread. Large‐scale compressional deformation is restricted to sites where glaciers readvanced. Large‐scale vertical deformation occurs where water was locally ponded near the ice margin. There is no evidence for glaciomarine conditions. Copyright © 2003 John Wiley & Sons, Ltd.