Confined groundwater system in Tokyo

The Musashino Terrace and the Shitamachi Lowland, the main urban areas in the Tokyo metropolis, are in the eastern part of Tokyo and are underlain by thick Quaternary sediments. The geologic structrue of these sediments has a general strike of WNW—ESE, with a gentle dip to the east in the western part of the Musashino Terrace, and strikes generally to the E—W with a gentle dip to the north in the eastern part of the terrace and strikes WNW—ESE to N—S with a very gentle dip to the east in the Shitamachi Lowland. The basal sediments in this area consist chiefly of massive thick silty layers, whereas the sediments overlying them consist of alternating layers of silt, sand, and gravel, which act as confined aquifers throughout the Musashino Terrace and the Shitamachi Lowland. Confined groundwater systems are being developed in the Tama District, the western part of the terrace, and are mainly recharged with river water from the Tama River. The unconfined groundwater system is being developed in the surface layers such as terrace sand and gravel formations and the Kanto Loam Formation. These confined aquifers that are being developed throughout the terrace and the lowland have been exploited for household water supplies and industrial and air-conditioning use for nearly seven decades. The heavy utilization of the confined groundwater, however, has caused a major lowering of groundwater levels. As a result of the lowering of groundwater levels, land subsidence has occurred all over the Lowland and the terrace. At this time the national government and the Tokyo Metropolitan Government restricted groundwater withdrawals for industrial, air-conditioning use and the others except for household supply. Owing to these restrictions, not only have the water levels recovered, but land subsidence has rapidly declined since around 1973.     

Formal definition and dating of the GSSP (Global Stratotype Section and Point) for the base of the Holocene using the Greenland NGRIP ice core,and selected auxiliary records

The Greenland ice core from NorthGRIP (NGRIP) contains a proxy climate record across the Pleistocene–Holocene boundary of unprecedented clarity and resolution. Analysis of an array of physical and chemical parameters within the ice enables the base of the Holocene, as reflected in the first signs of climatic warming at the end of the Younger Dryas/Greenland Stadial 1 cold phase, to be located with a high degree of precision. This climatic event is most clearly reflected in an abrupt shift in deuterium excess values, accompanied by more gradual changes in δ¹⁸O, dust concentration, a range of chemical species, and annual layer thickness. A timescale based on multi‐parameter annual layer counting provides an age of 11 700 calendar yr b2 k (before AD 2000) for the base of the Holocene, with a maximum counting error of 99 yr. A proposal that an archived core from this unique sequence should constitute the Global Stratotype Section and Point (GSSP) for the base of the Holocene Series/Epoch (Quaternary System/Period) has been ratified by the International Union of Geological Sciences. Five auxiliary stratotypes for the Pleistocene–Holocene boundary have also been recognised. Copyright © 2008 John Wiley & Sons, Ltd.     

Production and transport of long-chain alkenones and alkyl alkenoates in a sea water column in the northwestern Pacific off central Japan

Sinking particles collected from year-long time-series sediment traps at 1674, 4180, 5687 and 8688 m depths, the underlying bottom sediment at 9200 m depth, and suspended particles from surface and subsurface waters in the northwestern North Pacific off Japan were analyzed for long-chain alkenones and alkyl alkenoates (A&A) which are derived mainly from Gephyrocapsacean algae, especially Emiliania huxleyi and Gephyrocapsa oceanica. Alkenone temperature records in sediment trap samples at 1674 m were almost similar to observed sea surface temperatures (SST) with a time delay of one half to one full month. However, alkenone temperatures in trap samples were about slightly lower than measured SST in late spring to early fall. The lowering might be caused by formation of the seasonal thermocline. Nevertheless, these temperature drops observed in trap samples were smaller than those actually observed in a subsurface layer off central Japan. Vertical profiles of A&A concentrations and alkenone temperatures in suspended particles collected from the subsurface waters in early fall indicated that these compounds were produced mostly in a surface mixed layer above the depth of the chlorophyll maximum even in warm seasons. These results suggested that alkenone temperatures strongly reflected SST rather than the temperatures of thermocline waters in these study areas even in such a warm season. Pronounced maxima in A&A fluxes found in sediment trap samples at 1674 m in late spring to summer showed that A&A productions were highest during the periods of spring bloom, according to a time delay between alkenone temperatures and observed SST. Seasonal patterns of alkenone records in trap samples at 4180 and 5687 m could also preserve SST signals well, suggesting that A&A in deep sea waters were mainly derived from primary products in the surface layer. A&A fluxes tended to decrease with water depth, and the ratios of A&A to particulate organic carbon (POC) rapidly decreased in underlying bottom sediment. This clearly indicates that A&A were decomposed and diluted by other refractory organic materials in either the water column or the sediment–water interface. However, A&A compositions were consistently uniform between the trap samples and the underlying bottom sediments, so that A&A could not qualitatively alter during early diagenetic processes.     

Interactions of uranium with bacteria and kaolinite clay

We assessed the accumulation of uranium (VI) by a bacterium, Bacillus subtilis, suspended in a slurry of kaolinite clay, to elucidate the role of microbes on the mobility of U(VI). Various mixtures of bacteria and the koalinite were exposed to solutions of 8 × 10^− 6 M- and 4 × 10^− 4 M-U(VI) in 0.01 M NaCl at pH 4.7. After 48 h, the mixtures were separated from the solutions by centrifugation, and treated with a 1 M CH₃COOK for 24 h to determine the associations of U within the mixture. The mixture exposed to 4 × 10^− 4 M U was analyzed by transmission electron microscope (TEM) equipped with EDS. The accumulation of U by the mixture increased with an increase in the amount of B. subtilis cells present at both U concentrations. Treatment of kaolinite with CH₃COOK, removed approximately 80% of the associated uranium. However, in the presence of B. subtilis the amount of U removed was much less. TEM–EDS analysis confirmed that most of the U removed from solution was associated with B. subtilis. XANES analysis of the oxidation state of uranium associated with B. subtilis, kaolinite, and with the mixture containing both revealed that it was present as U(VI). These results suggest that the bacteria have a higher affinity for U than the kaolinite clay mineral under the experimental conditions tested, and that they can immobilize significant amount of uranium.     

Sound velocity measurements in dhcp-FeH up to 70 GPa with inelastic X-ray scattering: Implications for the composition of the Earth's core

We have determined the density evolution of the sound velocity of dhcp-FeH_x (x ≈ 1) up to 70 GPa at room temperature, by inelastic X-ray scattering and by X-ray diffraction. We find that the variation of V_P with density is different for the ferromagnetic and nonmagnetic dhcp-FeH_x, and that only nonmagnetic dhcp-FeH_x follows Birch's law. Combining our results with Birch's law for iron and assuming an ideal two-component mixing model, we obtain an upper bound of the hydrogen content in the Earth's inner core, 0.23(6) wt.% H, corresponding to FeH_0.13(3). The iron alloy with 0.23(6) wt.% H can satisfy the density, and compressional and shear sound velocities of the PREM inner core, assuming that there are no other light elements in the inner core.     

Melting of iron–silicon alloy up to the core–mantle boundary pressure: implications to the thermal structure of the Earth’s core

The melting temperature of Fe–18 wt% Si alloy was determined up to 119 GPa based on a change of laser heating efficiency and the texture of the recovered samples in the laser-heated diamond anvil cell experiments. We have also investigated the subsolidus phase relations of Fe–18 wt% Si alloy by the in-situ X-ray diffraction method and confirmed that the bcc phase is stable at least up to 57 GPa and high temperature. The melting curve of the alloy was fitted by the Simon’s equation, P(GPa)/a = (T _m(K)/T ₀) ^c , with parameters, T ₀ = 1,473 K, a = 3.5 ± 1.1 GPa, and c = 4.5 ± 0.4. The melting temperature of bcc Fe–18 wt% Si alloy is comparable with that of pure iron in the pressure range of this work. The melting temperature of Fe–18 wt% Si alloy is estimated to be 3,300–3,500 K at 135 GPa, and 4,000–4,200 K at around 330 GPa, which may provide the lower bound of the temperatures at the core–mantle boundary and the inner core–outer core boundary if the light element in the core is silicon.     

Characteristics of crustal structures in the Yamato Basin,sea of Japan,deduced from seismic explorations

Crustal structures around the Yamato Basin in the southeastern Sea of Japan, inferred from recent ocean bottom seismography (OBS) and active-source seismological studies, are reviewed to elucidate various stages of crustal modification involved from rifting in the crust of the surrounding continental arc to the production of oceanic crust in the Yamato Basin of the back-arc basin. The northern, central, and southern areas of the Yamato Basin have crustal thicknesses of approximately 12–16 km, and lowermost crusts with P-wave velocities greater than 7.2 km/s. Very few units have P-wave velocities in the range 5.4–6.0 km/s, which corresponds to the continental upper crust. These findings, combined with previous geochemical analysis of basalt samples, are interpreted to indicate that a thick oceanic crust has been formed in these areas of the basin, and that this oceanic crust has been underplated by mantle-derived magma. In the central Yamato Basin, the original continental crust has been fully breached and oceanic crust has been formed. Conversely, the presence of a unit corresponding to the continental upper crust and the absence of a high-velocity part in the lower crust implies that the southwestern edge of the Yamato Basin has a rifted crust without significant intrusion. The Oki Trough has a crust that is 17–19 km thick with a high-velocity lower crust and a unit corresponding to the continental upper crust. The formation of the Oki Trough resulted from rifting with magmatic intrusion and/or underplating. We interpret these variations in the crustal characteristics of the Yamato Basin area as reflecting various instances of crustal modification by thinning and magmatic intrusion due to back-arc extension, resulting in the production of a thick oceanic crust in the basin.     

ANALYSIS OF Cu, Cd, Co AND Ni IN SURFACE WATER OF THE KUROSHIO AREA IN THE EAST CHINA SEA

Study of 1986 and 1987 heavy metal distribution in surface water of the Kuroshio area in the East China Sea showed regional and slight seasonal variations in distribution and concentration . Heavy metal levels in Taiwan Strait, the sea area north of Taiwan and the continental shelf are higher than those in the main axis of the Kuroshio . Dissolved Cu in summer and winter decreases with the increase of salinity , but dissolved Cd has no obvious change with salinity .