SIMS analyses of silicon and oxygen isotope ratios for quartz from Archean and Paleoproterozoic banded iron formations

Banded iron formations (BIFs) are chemical marine sediments dominantly composed of alternating iron-rich (oxide, carbonate, sulfide) and silicon-rich (chert, jasper) layers. Isotope ratios of iron, carbon, and sulfur in BIF iron-bearing minerals are biosignatures that reflect microbial cycling for these elements in BIFs. While much attention has focused on iron, banded iron formations are equally banded silica formations. Thus, silicon isotope ratios for quartz can provide insight on the sources and cycling of silicon in BIFs. BIFs are banded by definition, and microlaminae, or sub-mm banding, are characteristic of many BIFs. In situ microanalysis including secondary ion mass spectrometry is well-suited for analyzing such small features. In this study we used a CAMECA IMS-1280 ion microprobe to obtain highly accurate (±0.3‰) and spatially resolved (∼10 μm spot size) analyses of silicon and oxygen isotope ratios for quartz from several well known BIFs: Isua, southwest Greenland (∼3.8 Ga); Hamersley Group, Western Australia (∼2.5 Ga); Transvaal Group, South Africa (∼2.5 Ga); and Biwabik Iron Formation, Minnesota, USA (∼1.9 Ga). Values of δ¹⁸O range from +7.9‰ to +27.5‰ and include the highest reported δ¹⁸O values for BIF quartz. Values of δ³⁰Si have a range of ∼5‰ from −3.7‰ to +1.2‰ and extend to the lowest δ³⁰Si values for Precambrian cherts. Isua BIF samples are homogeneous in δ¹⁸O to ±0.3‰ at mm- to cm-scale, but are heterogeneous in δ³⁰Si up to 3‰, similar to the range in δ³⁰Si found in BIFs that have not experienced high temperature metamorphism (up to 300 °C). Values of δ³⁰Si for quartz are homogeneous to ±0.3‰ in individual sub-mm laminae, but vary by up to 3‰ between multiple laminae over mm-to-cm of vertical banding. The scale of exchange for Si in quartz in BIFs is thus limited to the size of microlaminae, or less than ∼1 mm. We interpret differences in δ³⁰Si between microlaminae as preserved from primary deposition. Silicon in BIF quartz is mostly of marine hydrothermal origin (δ³⁰Si < −0.5‰) but silicon from continental weathering (δ³⁰Si ∼ 1‰) was an important source as early as 3.8 Ga.     

尼罗河及其流域环境的近期变化：以文献为依据

The Nile is one of the longest rivers on the planet and an important freshwater source for the arid regions of Africa. It is also a river that is extensively affected by anthropogenic impact. This paper aims to provide an account of the social drivers that combine to cause extensive changes in the Nilotic environments. This paper is based on extensive review of literature backed up by field research. The main focus is on the lower Nile, where the effects of anthropogenic disturbances are most prominent. We argue that the Nile Basin is characterized by interrelated and compound problems of resource management, and managing this river system effectively requires shifting the focus from water related problems to a basin wide management agenda. We contend that knowledge of environmental history is important for this agenda shift, and the idea of benefit sharing can alleviate the growing stress on this extremely sensitive arid river basin.     

Synthesis of γ-Mg2SiO4

Magnesium orthosilicate with spinel structure (γ-Mg₂SiO₄) was synthesized at about 250 kbar and 1000°C. Unit cell dimension was established to be 8.076 ± 0.001Å. X-ray powder diffraction pattern revealed a significant difference between γ-Mg₂SiO₄ and other γ-M₂SiO₄ spinels (M = Fe, Co, and Ni) in the intensities of (111) and (331) reflections, both of which are virtually absent in the Mg₂SiO₄ spinel. This feature could be thoroughly understood by the calculation of the intensities for several silicate spinels.     

Ionospheric delay gradient model for GBAS in the Asia-Pacific region

GPS Solutions - We investigated characteristics of anomalous spatial gradients in ionospheric delay on GNSS signals in the Asia-Pacific (APAC) low-magnetic latitude region in the context of the...     

Correlated δ18O and [Ti] in lunar zircons: a terrestrial perspective for magma temperatures and water content on the Moon

Zircon grains were separated from lunar regolith and rocks returned from four Apollo landing sites, and analyzed in situ by secondary ion mass spectrometry. Many regolith zircons preserve magmatic δ¹⁸O and trace element compositions and, although out of petrologic context, represent a relatively unexplored resource for study of the Moon and possibly other bodies in the solar system. The combination of oxygen isotope ratios and [Ti] provides a unique geochemical signature that identifies zircons from the Moon. The oxygen isotope ratios of lunar zircons are remarkably constant and unexpectedly higher in δ¹⁸O (5.61 ± 0.07 ‰ VSMOW) than zircons from Earth’s oceanic crust (5.20 ± 0.03 ‰) even though mare basalt whole-rock samples are nearly the same in δ¹⁸O as oceanic basalts on Earth (~5.6 ‰). Thus, the average fractionation of oxygen isotopes between primitive basalt and zircon is smaller on the Moon [Δ¹⁸O(WR-Zrc) = 0.08 ± 0.09 ‰] than on Earth (0.37 ± 0.04 ‰). The smaller fractionations on the Moon suggest higher temperatures of zircon crystallization in lunar magmas and are consistent with higher [Ti] in lunar zircons. Phase equilibria estimates also indicate high temperatures for lunar magmas, but not specifically for evolved zircon-forming melts. If the solidus temperature of a given magma is a function of its water content, then so is the crystallization temperature of any zircon forming in that melt. The systematic nature of O and Ti data for lunar zircons suggests a model based on the following observations. Many of the analyzed lunar zircons are likely from K, rare earth elements, P (KREEP)-Zr-rich magmas. Zircon does not saturate in normal mafic magmas; igneous zircons in mafic rocks are typically late and formed in the last most evolved portion of melts. Even if initial bulk water content is moderately low, the late zircon-forming melt can concentrate water locally. In general, water lowers crystallization temperatures, in which case late igneous zircon can form at significantly lower temperatures than the solidus inferred for a bulk-rock composition. Although lunar basalts could readily lose H₂ to space during eruption, lowering water fugacity; the morphology, large size, and presence in plutonic rocks suggest that many zircons crystallized at depths that retarded degassing. In this case, the crystallization temperatures of zircons are a sensitive monitor of the water content of the parental magma as well as the evolved zircon-forming melt. If the smaller Δ¹⁸O(zircon–mare basalt) values reported here are characteristic of the Moon, then that would suggest that even highly evolved zircon-forming magmas on the Moon crystallized at higher temperature than similar magmas on Earth and that magmas, though not necessarily water-free, were generally drier on the Moon.     

Fractal size and spatial distributions of fault zones: An investigation into the seismic Chelungpu Fault, Taiwan

Abstract   The fractality of fault zones of thickness T for the 248-m-long core from a borehole penetrating the northern segment of the seismic Chelungpu Fault, Taiwan, was analyzed. The frequency curve of T shows that the fractal dimension is normal when T is smaller than a characteristic thickness T _c, and it becomes abnormally large when T exceeds T _c. The fractal dimensions of size and spatial distributions of T increase as the mean distribution density of T increases, which is inconsistent with the evolution laws for ordinary brittle faults. This discrepancy implies that the thickening rate of T when T is more than T _c is not constant, but a decreasing function of fault displacement. The slow thickening rate is related to the elastohydrodynamic lubrication which was effective on the fault when T exceeds T _c. This slip instability mechanism can explain the large, fast and smooth slip on the northern segment of the Chelungpu Fault during the 1999 Chi-Chi earthquake.     

Effects of deposit feeder Stichopus japonicus on algal bloom and organic matter contents of bottom sediments of the enclosed sea

Algae growing in an enclosed sea may inhibit eutrophication because they absorb nutrients in the water. However, dead algae often cause anaerobic conditions in the water just above and on sediment after they are deposited on the bottom. We found that Stichopus japonicus inhibited the anaerobic processes coupling water sulfite production in sediment. The present study investigates whether S. japonicus inhibits algal flourish and influences sediment properties such as organic matter contents. Aquarium experiments were carried out at Komatsushima port in Tokushima Prefecture, western Japan. The aquaria used in the experiments were supplied with water directly from the adjacent sea (6 L/min), laid with sand of 10 cm depths, and lighted at 12 h intervals. Six aquaria each containing a sea cucumber from Komatsushima port and six aquaria without any were used in the experiments. Water temperature ranged between 9 and 15 degrees C during December 2000 and April 2001. Salinity ranged between 32 per thousand and 34 per thousand. Algae began to cover the bottom of the aquaria without S. japonicus after 2 weeks, whereas no growth was evident in the aquaria containing sea cucumbers. Chlorophyll a concentration in the surface sediment of the aquaria with S. japonicus (6.1+/-3.6 microg/g, mean S.D.+/-standard deviation) was significantly lower than that without it (60+/-17 microg/g, U-test, p<0.05). Phaeophytin concentration in the surface sediment of the aquaria with S. japonicus (0.9+/-0.09 microg/g) was also significantly lower than that without it (4.5+/-1.0 microg/g, U-test, p<0.05). TOC concentration in the surface sediment of the aquaria with S. japonicus (2.6+/-1.3 microg/g) was slightly lower than that without it (4.0+/-1.2 microg/g). These results showed that algal biomass and organic matter concentration of the bottom were decreased in the presence of S. japonicus. Therefore, S. japonicus inhibits algal bloom and decrease the contents of organic matter deposited on the bottom of enclosed sea areas.     

Damping systems that are effective over a wide range of displacement amplitudes using metallic yielding component and viscoelastic damper in series

A damper system that absorbs energy over a wide range of displacement amplitudes during building vibration was proposed. This system uses a serial connection of a metallic yielding component and viscoelastic damper with a displacement limit mechanism. Three types of the system were developed and tested: a diagonal bracing type, inverted V bracing type, and wall type. The test results showed that all these systems have damping ratios higher than 8% at small vibration amplitudes on the order of 0.1 mm. For a large vibration, a displacement limit mechanism with two pins limited the displacement of the viscoelastic damper as designed. Analytical simulations established that the system reduced the acceleration and the story drift to 60–70% and 80%, respectively, during a small earthquake compared with a conventional metallic yielding damper system. Furthermore, it showed an equivalent control performance during a severe earthquake. The damper system requires that a clearance be maintained for the displacement limit mechanism. However, this may be lost through construction error, residual displacement after an earthquake, and temperature effects. The changes in the clearance due to these effects were discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

A Simple Theoretical Radiation Scheme for Regular Building Arrays

We propose a simple theoretical radiation scheme for regular building arrays. The essential difference of the present radiation scheme from the previous ones is the explicit consideration of the three-dimensional features of the surface geometry. The model is assumed to be an infinitely extended regular array of uniform buildings, each building composed of six faces (roof, floor, and four vertical walls). Without using time-consuming iterations or statistical approaches, we calculated the view factors of the faces, the complicated sunlit--shadow distributions, and the resulting canopy albedo for any time and location. The model was evaluated by comparing to outdoor experiments in a wide range of seasons and surface geometries. The simulated canopy albedos agreed well with measured values, and the accuracy is a significant improvement over two-dimensional-based model outputs.