Oxidative stress responses of submerged macrophyte Vallisneria asiatica to different concentrations of cyanobacteria

In a 10-day aquarium experiment,this investigation examines macrophyte restoration in eutrophic Lake Taihu,the physiological effects of different plant biomass levels and of increasing natural cyanobacterial concentrations on a submerged macrophyte,Vallisneria asiatica. Cyanobacterial stress suppressed the superoxide dismutase(SOD) activity of the plant's leaves and induced the catalase(CAT) and peroxidase(POD) activities of its roots. The soluble protein content in V. asiatica decreased with an increase in natural cyanobacterial concentrations,whereas the malonaldehyde(MDA) increased significantly at chlorophylla(Chl a) concentrations of 222 and 262 μg/L in water. V. asiatica adapted to the stress caused by cyanobacterial concentrations by adjusting its antioxidant defense system to remove the excessive reactive oxygen species when the algal Chl a concentration was 109 μg/L. Additionally,high biomass of V. asiatica(2 222 g FW/m 2) can inhibit the reproduction of cyanobacteria more significantly than low biomass(1 111 g FW/m2). High biomass of V. asiatica increased the oxidative stress in an individual plant when the initial Chl a concentration in the water reached 222 and 262 μg/L,as expressed by the increased MDA in leaves,compared with low biomass of V. asiatica. This provides a basis for controlling cyanobacterial concentrations and V. asiatica biomass for the recovery of V. asiatica in eutrophic Lake Taihu.     

天文选址相机的研制

详细介绍了天文选址用CCD相机的开发研制．系统探测器选用具有累进扫描模式的ICX098ALCCD芯片，采用相关双采样信号读出电路、USB通讯接口实现数据与命令的传输．对系统工作性能进行了详细的测试：12℃条件下暗流约为52adu／see，系统增益(system gain)为2.2e／adu，读出噪声(readout noise)为30e．最后给出了在日本冈山天体物理观测所对大气宁静度的实测结果，该结果与冈山已有仪器测量值吻合．     

Lithofacies and eruption ages of Late Cretaceous caldera volcanoes in the Himeji–Yamasaki district, southwest Japan: Implications for ancient large-scale felsic arc volcanism

Abstract The Himeji–Yamasaki region in the Inner Zone of southwest Japan is underlain mainly by Late Cretaceous volcanic rocks called the Ikuno Group or the Hiromine and Aioi Groups. A new stratigraphic and geochronological study shows that the volcanic rocks in this area consist of 15 eroded caldera volcanoes between 82 and 65 Ma; they are, in order of decreasing age, the Hiromine, Hoden, Ibo, Okawachi, Seppikosan, Hayashida, Shinokubi, Fukusaki, Kurooyama, Ise, Fukadanigawa, Nagusayama, Matobayama, Yumesaki and Mineyama Formations. These calderas vary in diameter from 1 to 20 km and are bounded by steep unconformities; they coalesce and overlap each other. The individual caldera fills are composed mainly of single voluminous pyroclastic flow deposits, which are often interleaved with debris avalanche deposits and occasionally underlie lacustrine deposits. The intracaldera pyroclastic flow deposits are made up of massive, welded or non‐welded tuff breccia to lapilli tuff, and are characterized by their great thickness. The debris avalanche deposits are ill‐sorted breccia, generated by the collapse of the caldera wall toward the caldera floor during the pyroclastic‐flow eruption. The large calderas that are more than 10 km in diameter contain original values of approximately 100 km³ of intracaldera pyroclastic flow deposits. These large calderas are similar to the well‐known Valles‐type calderas in their dimensions, although it is uncertain whether their caldera floors are coherent plates or incoherent pieces. Conversely, the small calderas have diatreme‐like subsurface structures. The variety of the caldera volcanoes in this area is caused by the difference in the volume of caldera‐forming pyroclastic eruptions, as the large and small calderas coexisted. The caldera‐forming eruption rates in Late Cretaceous southwest Japan, including the studied area, were similar to those in late Cenozoic central Andes and northeast Honshu arc, Japan, but obviously smaller than those of late Cenozoic intracratonic caldera clusters in western North America and the Quaternary extensional volcanic arcs in Taupo, New Zealand. The widespread Late Cretaceous felsic igneous rocks in southwest Japan were generated by a long‐term accumulation of low‐rate granitic magmatism at the eastern margin of the Eurasian Plate.     

Development of a new operational system for monitoring and forecasting coastal and open-ocean states around Japan

We developed a new system to monitor and forecast coastal and open-ocean states around Japan for operational use by the Japan Meteorological Agency. The system consists of an eddy-resolving analysis model based on four-dimensional variational assimilation and a high (2-km) resolution forecast model covering Japanese coastal areas that incorporates an initialization scheme with temporal and spatial filtering. Assimilation and forecast experiments were performed for 2008 to 2017, and the results were validated against various observation datasets. The assimilation results captured well the observed variability in sea surface temperature, coastal sea level, volume transport, and sea ice. Furthermore, the volume budget for the Japan Sea was significantly improved by the use of the 2-km resolution forecast model compared with the 10-km resolution analysis model. The forecast results indicate that this system has a predictive limit longer than 1 month in many areas, including in the Kuroshio current area south of Japan and the southern Japan Sea. In the forecast results of case studies, the 2017 Kuroshio large meander was well predicted, and warm water intrusions accompanying Kuroshio path variations south of Japan were also successfully reproduced. Sea ice forecasts for the Sea of Okhotsk largely captured the evolution of sea ice in late winter, but sea ice in early winter included relatively large errors. This system has high potential to meet operational requirements for monitoring and forecasting ocean phenomena at both meso- and coastal scales.

     

Hydraulic model tests for evaluating sediment control function with a grid-type Sabo dam in mountainous torrents

There are two kinds of Sabo dams in order to control sediment transport by debris flow and flash floods in mountainous area, which are closed and open-type＇s dams. In Japan, open-type＇s Sabo dams are constructed taking into account the continuity of sediment routing from upstream to downstream reach in a basin. A plan to construct a 20 m high grid-type Sabo dam which can capture a sediment volume of 400,000 m3 is proposed in the Amahata river basin in Japan. Hydraulic model tests are conducted to decide on the section for a dam （Section A, B） and the grid size such as clearance of vertical/horizontal bars for evaluating the plan. Several runs of flume tests are conducted and the sediment control function of the Sabo darn is discussed using several experimental data such as dimensionless sediment runoff rate from Sabo dam, temporal changes of bed profile and mean diameter and so on. It was found that sediment deposition in sediment storage area of Sabo dam was affected by curved channel, and that next the grid size of steel bars and thirdly the section of a dam was able to capture sediment in storage area of Sabo dam. Sediment was controlled well in the section B and in the grid size of 1.0×d95, and the problems related to sediment runoffafter sediment capturing in Sabo dam are pointed out.     

Application of Continuous 222Rn Monitor with Dual Loop System in a Small Lake

To estimate the spatial distribution of groundwater discharge from the bottom of a small lake of Kumamoto in Japan, we applied continuous radon measurements with a dual loop system and verified the results obtained using the radon method by visual diving surveys. Time‐shifting correction in the dual‐loop system is reasonable to obtain the true radon activity in water. Distributions of radon activity and water temperature in the study area reveal the effects on groundwater discharge and mixing situation of lake water. The estimated discharge zone ascertained using the radon method agrees with the groundwater discharge distribution observed through diving surveys. Although the data resolution of the radon method is much greater than the width of observed discharge zones, the general distribution of groundwater discharge is recognizable. The dual loop system of radon measurement is useful for smaller areas.     

Crustal anorthosite formation by deep-seated hydrothermal circulation beneath fast-spreading axis: Constraints from chronological approach,Sr isotope,and fluid–chromite inclusion investigation

Hydrothermal circulation beneath the spreading axis plays a significant role in the exchange of energy and mass between the solid Earth and the oceans. Deep-seated hydrothermal circulation down to the crust/mantle boundary in the fast-spreading axis has been introduced by a number of studies regarding geological investigations and numerical models. In order to assess a reaction between hydrothermal fluid and host rock around the crust/mantle boundary, we conducted bulk trace element and Sr isotope analyses with a series of in situ investigations for crustal anorthosite, a reaction product between hydrothermal fluid and gabbro in the lowermost crustal section along Wadi Fizh, northern Oman ophiolite. In addition, we conducted titanite U–Pb isotope analyses to evaluate timing of the crustal anorthosite formation in the framework of the evolutional process of the Oman ophiolite. We estimated the formation age of the crustal anorthosite at 97.5 Ma ± 5.0 Ma, overlapping with the timing of the crust formation in the paleo spreading axis. The crustal anorthosite shows high-Th/U ratio (~2.5) and high-initial ⁸⁷Sr/⁸⁶Sr ratio (0.7050) due to seawater-derived hydrothermal fluid ingress into the precursor gabbro. With using analytical technique of micro-excavation at cryo-temperature, we detected Cl from a few micrometer-sized inclusion of aqueous fluid and chromite grains. The solubility of Cr was enhanced by complexation reactions with Cl in the hydrothermal fluid. Regarding reconstructed three-dimensional mass distribution of the inclusion and chromite composition, maximum Cr content of parental fluid was estimated at ~69 000 μg/g. The exceptionally high-Cr content was achieved locally by leaking of fluid and synchronous chromite crystallization during fluid entrapment. Presence of the deep-seated hydrothermal circulation could be assigned to the segment end, where cold seawater penetrates into the lowermost crust and extract heat along widely spaced network-like fluid channel.     

Isotopic geochemistry of Hualalai shield-stage tholeiitic basalts from submarine North Kona region,Hawaii

The geochemical data of Hualalai tholeiitic basalts allow extension of the temporal variations established at Mauna Loa back in time, and provide important information for the long-term temporal variation of the Hawaiian lavas. We report new Hf, Pb, Nd, and Sr isotope compositions for 32 Hualalai tholeiitic basalts collected from deep submarine portions of the North Kona region. The samples were collected from the lower section of the North Kona bench (dives K218 and K219), a submarine stratigraphic section at Hualalai volcano's northwest rift zone (dive S690), and an elongate ridge outboard of the central section of the bench (dive S692), during two JAMSTEC Hawaii cruises in 2001 and 2002. The Hualalai shield-stage tholeiitic basalts have magma source isotopic signatures similar to Mauna Loa. The new data shows temporal Pb and Sr isotope trends that correspond to the long-term temporal variations in Loa-trend lavas, and the Hualalai–Mauna Loa lavas seem to show inter-shield geochemical excursions. Variation in Pb and Sr isotopes at Hualalai appears to take place over a longer time scale than at Mauna Loa. The merged Hualalai–Mauna Loa isotopic trends support models where heterogeneous material in the plume conduit is distributed chaotically, with variable cross-sectional density and length scale.     

The rate of fluvial incision during the Late Quaternary period in the Abukuma Mountains, northeast Japan, deduced from tephrochronology

Abstract River incision into bedrock results in the decrease of burial depths, which can be of critical importance, for example, in the safe long‐term storage of high‐level radioactive waste. For the long‐term prediction of river erosion, it is essential to know the rate of incision during the Late Quaternary period. In the Abukuma Mountains on the forearc side of northeast Japan, a low‐relief peneplain that was uplifted in the Pliocene period is widely developed. Degradational fluvial terraces that are discontinuously distributed along draining rivers are scattered in the study area. The fluvial sediments were mainly transported from the summit regions as debris flows or hyperconcentrated flows. The terrace deposits are capped by a series of eolian veneers containing key tephra beds. From the oldest to the youngest, these tephra beds are the 150–125 ka Iizuna–Kamitaru tephra, the 135–125 ka Hiuchigatake–Tagashira tephra, the 120 ka Adatara–Dake tephra, the 70–80 ka Bandai–Hayama‐2 tephra, the 45 ka Numazawa–Mizunuma tephra and the 42 ka Bandai–Hayama‐1 tephra. Using tephrochronological data, the terraces are divided into three groups: higher, middle and lower. The ages of formation of the higher, middle and lower terraces are estimated to be within marine isotope stage (MIS) 6, MIS 5.4–5.2 and MIS 3 to MIS 2, respectively. The incision rate, calculated from the relative height between the terrace surface and present‐day valley floor fill, is 1.5–0.8 m/10 000 years in the elevations from 350 to 700 m. The calculated rate does not show significant differences between the higher, middle and lower terraces. All the relative heights decrease with increasing elevation, because the erosional rates of streams in the upper reaches are lower than those in downstream reaches where the discharge rates are higher. This value can be regarded as an estimate of the rate of incision in granitic mountains where there is no volcanic or distinct tectonic activity.     

Development of new sensor systems for continuous bedload monitoring using a submerged load‐cell system (SLS)

It is important to evaluate bedload discharge and temporal changes of the bed surface, and bed deformation can be estimated during floods if the bedload discharge is properly evaluated in an arbitrary cross‐section. With the exception of grain size and its distribution within the bedload, bedload discharge has been measured using both direct and indirect methods. Bedload slot is a direct method but cannot be used to measure bedload during a flood because of volume limitations. Indirect methods require correlation between the signals and sediment volume measured using another method. In the present study, a small, automatically recording bedload sensor with an iron plate and a pair of load cells is developed in order to evaluate not only large particles but also sand particles as bedload. Bedload mass is calculated by integrating with respect to both the velocity of sediment particles and the averaged particle weight as measured by a pair of load cells, and, as an example, the velocity is estimated by the cross‐correlation function of weights measured by load cells. The applicability of the proposed sensor is discussed based on the results of flume tests in the laboratory (2014) and the observation flume of the Hodaka Sedimentation Observatory of Kyoto University in Japan (2015). The system was installed in the observation flume in November of 2012, and flume data were obtained using natural sediment particles. In particular, it was difficult to estimate the velocity of averaged bedload particles, and it was better to apply a cross‐correlation function in the laboratory tests. However, it appears that the previous estimation can estimate these velocities in the observation flume using a connecting tube and submerged load‐cell systems. Copyright © 2017 John Wiley & Sons, Ltd.