Illumination conditions of the south pole of the Moon derived using Kaguya topography

We have used the Kaguya laser altimeter-derived topography to conduct a comprehensive study of the illumination conditions at the Moon’s south pole. We have determined, by comparing simulated and actual Clementine images, that the Kaguya topography can be used to generate realistic illumination conditions. We generated an average illumination map for the year 2020 for the lunar south pole region. From this we identified the areas that receive the most illumination. The place receiving the most illumination (86% of the year) is located close to the rim of Shackleton crater at 88.74°S 124.5°E. However two other areas, less than 10 km apart from each other, are collectively lit for 94% of the year. We found that sites exist near the south pole that are continuously lit for several months during summer. We were also able to map the locations and durations of eclipse periods for these areas. Finally we analyzed the seasonal variations in lighting conditions, from summer to winter, for key areas near the south pole. We conclude that areas exist near the south pole that have illumination conditions that make them ideal candidates as future outpost sites.     

Geochemical Characteristics of the Akiyoshi Limestones, Japan and Their Bearing on Exploration for Blind Skarn Deposits

Abstract. Carboniferous-Permian limestones of the Akiyoshi Plateau, in the Inner Zone of southwestern Japan, are composed of essentially pure calcium carbonate containing only small amounts of other elements, and they are accompanied by marble and copper skarn deposits near the contact with late Cretaceous granitoids. The δ¹⁸O values of the Akiyoshi limestones range widely from 7.6 to 28.3% and are mostly lower than those of other areas of the same age (23–29%), whereas the differences among the δ¹³C values are small. The δ¹⁸O values are negatively correlated with Mn and Fe contents. Samples with high δ¹⁸O (>25%) and δ¹³C (>2%) values do not contain Fe, Zn, or Pb, but those with low δ¹⁸O values tend to be rich in these elements, indicating that these elements were introduced by interaction with H₂O dominant fluids, possibly of magmatic origin. Potential scores for evaluating the degree of interaction with hydro thermal fluids were calculated for δ¹⁸O, δ¹³C, Fe, Mn, Zn, Pb, and Sr. Higher scores implying much hydrothermal interaction were evident in the Mt. Hananoyama area, where there are many skarn deposits, and along faults oriented mainly NNW-SSE. Therefore, these are promising areas for exploring for blind deposits. It is likely that the hydrothermal fluid traveled through the limestones along fractures at the time of the granitic intrusions. However, the potential scores here are much smaller than those in the Pb-Zn mineralized area of the Kamioka mine, so more detailed petrological and mineralogical investigations are necessary.     

Effect of helix bending deflection on load settlement behaviour of screw pile

A screw pile has higher end bearing capacity than any other straight pipe piles due to its larger helix with respect to central shaft. However, larger helices are not frequently used as it will bend and may reduce the actual bearing capacity of the ground. In the present study, the effect of helix bending deflection on the load settlement behaviour and ultimate bearing capacity is investigated. To achieve the objectives, model scale pile load tests were conducted. The effect of helix bending on the load settlement behaviour at higher stress level was also investigated in this research. The helices with different helix-to-shaft-diameter ratios and thicknesses were used, so that clear difference of deformed and non-deformed screw piles in the load settlement behaviour can be observed. Dry Toyoura sand in dense state was used as a model ground. It is observed from test results that the helix bending deflection starts affecting the load settlement behaviour of the ground if it is more than the critical helix bending deflection. The ratio of critical helix bending deflection to outstand length decreases with increase in helix-to-shaft-diameter ratio, and its relationship is presented in this study. It is also observed that the Roark’s formula for flat circular plate having uniform load over a very small circular area with fixed outer edges showed good agreement with the measured helix bending deflection. In order to estimate the optimum helix thickness, the well-agreed equation is also modified with respect to critical helix bending deflection.

     

Sensitive high-resolution ion microprobe U-Pb ages of the Latest Oligocene-Early Miocene rift-related Hidaka high-temperature metamorphism in Hokkaido, northern Japan

Abstract   In order to define the timing of granulite facies metamorphism, sensitive high-resolution ion microprobe (SHRIMP) U-Pb analyses were performed on zircons of three pelitic granulites from the lower metamorphic sequence of the Hidaka Metamorphic Belt, southern central Hokkaido, Japan. Both rounded and prismatic zircons were found in the granulite samples. The rounded zircons had thin (10–20 µm) concentric overgrowth rims on detrital cores, while the prismatic zircons did not have detrital cores. Both the overgrowth rims on the rounded zircons and the entire prismatic zircons were formed under granulite facies metamorphism and consistently yield Latest Oligocene–Early Miocene ages (23.7 ± 0.4 Ma to 17.2 ± 0.5 Ma; ²⁰⁶Pb/ ²³⁸U ages ( n  = 31) with low Th/U ratios, mostly <0.1). The internal structure of zircons and their SHRIMP U-Pb ages provide strong evidence in support of the granulite facies event occurring during the Latest Oligocene-Early Miocene. The detrital cores of rounded zircons show a huge variety of ages; Mesoarchean to Paleoproterozoic, Paleozoic to Mesozoic and Paleogene. The interior and marginal portions of the Eurasian continent including cratonic areas are suggested for their source provenances. These wide variations in age suggest that the protolith of the granulites of the lower metamorphic sequence were deposited near the trench of the Eurasian continental margin during Paleogene. The protolith of the lower metamorphic sequence of the Hidaka metamorphic belt was thrust under the upper metamorphic sequence, which had already been metamorphosed in early Paleogene. The Latest Oligocene-Early Miocene Hidaka high-temperature metamorphic event is presumed to have been caused by asthenospheric upwelling during back-arc rifting of the Kuril and Japan basins.     

Paleoseismic events and the 1596 Keicho-Fushimi large earthquake produced by a slip on the Gosukebashi fault at the eastern Rokko Mountains,Japan

Field surveys and trench excavation investigations revealed that there were at least four large seismic events produced by slips on the Gosukebashi fault in the Holocene in the southeastern Rokko Mountains of Japan. The characteristics of deformed topographies and three-dimensionally excavated exposures show that this fault is a right-lateral strike–slip fault having an average slip rate of 1.0 mm/year, with a reverse displacement component. The principle indicators of past faulting events are: (i) termination of secondary faults; (ii) sedimentary deposits related to faulting; and (iii) injection veins of fault gouge related to seismic faulting in the fractured zone. Radiocarbon dates indicate that the events occurred pre-1660 BC , 1660 BC –220 AD , from ～ 30–220 to 600 AD and 15th century AD . The youngest event is probably associated with the large 1596 AD Keicho-Fushimi earthquake which occurred in the area around Kyoto and Kobe Cities. The second younger event is probably correlated with the 416 AD Yamato earthquake, which is the oldest historic earthquake in Japanese historic records. The results of trench surveys show that the horizontal displacement produced by an individual event is ～ 1.5 m, and the recurrence of seismic event intervals is ～ 1200 years in the Gosukebashi fault.     

Seismic response controlled structure with Active Variable Stiffness system

The Active Variable Stiffness (AVS) system is proposed as a seismic response control system. It actively controls structural characteristics, such as stiffness of a building, to establish a non-resonant state against earthquake excitations, thus suppressing the building's response. It consumes a relatively small amount of energy and maintains the safety of the building in moderate to severe earthquakes. In order to accumulate practical data and investigate them, a building has been constructed as a trial. This paper describes the applied system, the control algorithm, verification of stiffness selection, results of tests for verifying system characteristics, some observed earthquake records and simulation analyses. Responses in controlled and uncontrolled states have been compared to show the effectiveness of the proposed system.     

Significance of stemflow in groundwater recharge. 2: A cylindrical infiltration model for evaluating the stemflow contribution to groundwater recharge

A primary model for evaluating the effect of stemflow on groundwater recharge has been developed. The model, a cylindrical infiltration model (CI model), is based on the infiltration area of stemflow-induced water instead of canopy projected area for determining the stemflow inputs to the soil surface. The estimated ratio of recharge rate by stemflow to the total recharge rate determined with this model agrees closely with values obtained from the mass balance of chloride in subsurface waters. This primary model is considered to be useful for estimating the effect of stemflow on groundwater recharge.     

Geologic evidence for late Quaternary repetitive surface faulting on the Isurugi fault along the northwestern margin of the Tonami Plain,north‐central Japan

Our detailed field investigation, paleoseismic trenching, and airborne light detection and ranging (LiDAR)‐derived topographic data provides the first direct evidence for late Quaternary repetitive surface faulting on the northeast‐striking Isurugi fault along the northwestern margin of the Tonami Plain in the Hokuriku region of north‐central Japan. This fault has been interpreted previously by different researchers as both inactive and active, owing to a lack of geologic evidence and a failure to identify fault‐related geomorphic features. Our mapping of LiDAR topography revealed a series of northeast‐trending warped fluvial terraces, about 1.5 km long and 170 m wide, with an age of ≤ 29 ka. We interpreted these geomorphologic features to represent an active pop‐up structure bounded to the southeast by the northwest‐dipping main thrust of the Isurugi fault and to the northwest by a southeast‐dipping backthrust that splays off the main thrust in the shallow subsurface. Paleoseismic trenching across the northwestern part of an elongate terrace exposed a series of southeast‐dipping backthrusts and associated northwest‐verging monoclines. The deformation and depositional age of the strata provide evidence for repetitive surface rupturing on the backthrusts since the latest Pleistocene; the latest of these events occurred in the Holocene between about 4.0 and 0.9 ka. Despite the poor preservation of the surface expression of the Isurugi fault, repetitive scarp‐forming faulting in the late Quaternary and the proximity of the Oyabe River and its tributaries to the fault trace suggest that there may be an extension of the Isurugi fault to the northeast and southwest beneath the Tonami Plain that makes the fault long enough to generate a large earthquake (Mw ≥ 6.8) accompanied by surface rupture.     

Some Pertinent Features of Mo‐Mineralized Granitoids in the Circum‐Pacific Region

Petrological characteristics of granitic rocks related to the world large molybdenum deposits are studied. The granitoids are evaluated by Fe₂O₃+TiO₂‐FeO+MnO‐MgO diagrams, and found to all plot to the magnetite‐series field. They are all high silica and high‐K series, but not A‐type, except for the Climax‐type porphyries and some others in the Colorado mineral belt. By‐product molybdenum contained in porphyry copper deposits, lower grade but huge tonnage, occurs with calc‐alkaline I‐type magnetite‐series granodiorite and monzogranite. Felsic intrusive rocks of the Climax mine are A‐type and are exceptionally high in trace elements such as F and Rb, which are generally enriched with W and Sn‐related granitoids that originated in crustal source rocks. The by‐product molybdenites in porphyry copper deposits appear to originate in adakitic granodiorite or monzogranite, having deep origins with the subducted slab or thickened juvenile mafic lower crust. Therefore, there is no single magma type but the magnetite series, which concentrates a large volume of molybdenum in the ore deposits.     

Capability of the penetrator seismometer system for lunar seismic event observation

We developed a seismometer system for a hard landing “penetrator” probe in the course of the former Japanese LUNAR-A project to deploy new seismic stations on the Moon. The penetrator seismometer system (PSS) consists of two short-period sensor components, a two-axis gimbal mechanism for orientation, and measurement electronics. To carry out seismic observations on the Moon using the penetrator, the seismometer system has to function properly in a lunar environment after a hard landing (impact acceleration of about 8000 G), and requires a signal-to-noise ratio to detect lunar seismic events. We evaluated whether the PSS could satisfactorily observe seismic events on the Moon by investigating the frequency response, noise level, and response to ground motion of our instrument in a simulated lunar environment after a simulated impact test. Our results indicate that the newly developed seismometer system can function properly after impact and is sensitive enough to detect seismic events on the Moon. Using this PSS, new seismic data from the Moon can be obtained during future lunar missions.