Influence of the Atmospheric Model on Hanle Diagnostics

We clarify the uncertainty in the inferred magnetic field vector via the Hanle diagnostics of the hydrogen Lyman-\(\upalpha\) line when the stratification of the underlying atmosphere is unknown. We calculate the anisotropy of the radiation field with plane-parallel semi-empirical models under the nonlocal thermal equilibrium condition and derive linear polarization signals for all possible parameters of magnetic field vectors based on an analytical solution of the atomic polarization and Hanle effect. We find that the semi-empirical models of the inter-network region (FAL-A) and network region (FAL-F) show similar degrees of anisotropy in the radiation field, and this similarity results in an acceptable inversion error (e.g., \({\sim}\, 40~\mbox{G}\) instead of 50 G in field strength and \({\sim}\,100^{\circ}\) instead of \(90^{\circ}\) in inclination) when FAL-A and FAL-F are swapped. However, the semi-empirical models of FAL-C (averaged quiet-Sun model including both inter-network and network regions) and FAL-P (plage regions) yield an atomic polarization that deviates from all other models, which makes it difficult to precisely determine the magnetic field vector if the correct atmospheric model is not known (e.g., the inversion error is much larger than 40% of the field strength; \({>}\,70~\mbox{G}\) instead of \(50~\mbox{G}\)). These results clearly demonstrate that the choice of model atmosphere is important for Hanle diagnostics. As is well known, one way to constrain the average atmospheric stratification is to measure the center-to-limb variation of the linear polarization signals. The dependence of the center-to-limb variations on the atmospheric model is also presented in this paper.     

Discriminating Weathering Degree by Integrating Optical Sensor and SAR Satellite Images for Potential Mapping of Groundwater Resources in Basement Aquifers of Semiarid Regions

Natural Resources Research - Unlike in coastal and sedimentary basins, regional-scale exploration of groundwater resources using only geophysical methods is costlier in consolidated rocks such as...     

Petrology of peridotite xenoliths in lamprophyre from Shingu,Southwestern Japan: Implications for origin of Fe-rich mantle peridotites

Summary Xenoliths of harzburgite, lherzolite, dunite and wehrlite (= Group I rocks) in lamprophyre dikes from Shingu are accompanied by large amounts of ultramafic-mafic xeno liths with Al- and Ti-rich clinopyroxene and/or kaersuite (websterite, clinopyroxenite, kaersutite rock, gabbro and anorthosite) (= Group II rocks). The latter rocks often crosscut the Group I rocks as veinlets, indicating that Group II rocks are younger. Although harzburgites and lherzolite from Shingu have ordinary modal compositions, the constituent minerals have extraordinary chemical characteristics; low Mg and Cr and high Ti, Al and Fe³⁺. Fo values of olivine range from 91 to 77. Cr/(Cr + Al) atomic ratios of spinel are lower than 0.5 even in harzburgites. Fe³⁺/(Cr+Al+Fe³⁺) atomic ratios of spinel are sometimes over 0.1. TiO₂ contents of clinopyroxene often exceed 0.5 wt%. These characteristics are revealed when Group I rocks are veined or selvaged by Group 11 rocks; chemical compositions of minerals in peridotites systematically change forwards the latter. This strongly suggests that injections of melts with alkali basaltic affinity which had precipitated Group 11 rocks resulted in diffusion metasomatism on the Group I rocks.It is likely that the metasomatized peridotites are widespread underneath the areas where alkali basalt magmatism had fluorished, such as southwestern Japan. Some of Fe-rich lherzolite and harzburgite xenoliths reported in the literature are possibly metasomatites.

---

Petrologie von Peridotit-Xenolithen in Lamprophyren von Shingu, Südwest-Japan: Hinweise auf die Herkunft Fe-reicher Mantel-Peridotite

Zusammenfassung In lamprophyrischen Gängen von Shingu kommen Xenolithe von Harzburgit, Lherzolith, Dunit and Wehrlit (= Gesteinsgruppe I) vor. Sie werden von einer Vielzahl von ultramaf-isch-mafischen Xenolithen mit Al- and Ti-reichem Klinopyroxen and/oder Kaersutit (Websterit, Klinopyroxenit, Kaersutit-Gestein, Gabbro and Anorthosit) (=Gesteinsgruppe II) begleitet, die die Xenolithe der Gruppe I häufig gangförmig durchkreuzen, was auf ein jü ngeres Alter der Gesteinsgruppe II hinweist. Obwohl die Harzburgite and Lherzolithe von Shingu übliche modale Mineralbestände aufweisen, sind die Mineralchemismen außergewöhnlich: Niedrige Mg- and Cr- and hohe Ti-, Al- and Fe³⁺-Gehalte. Die Fo-Gehalte von Olivin reichen von 91 bis 77. Die Cr/(Cr+Al)-Atom-Verhältnisse der Spinelle sind kleiner als 0,5, sogar in den Harzburgiten; die Fe³⁺/(Cr+Al+Fe³⁺)-Atom-Verhaltnisse teilweise größer als 0,1. Der TiO₂-Gehalt im Klinopyroxen ist meist über 0,5 Gew.%. Diese Charakteristika zeigen sich dort, wo die Gesteinsgruppe II die Gesteinsgruppe I durchschlägt oder kontaktiert. Der Mineralchemismus in den Peridotiten ändert sich dabei systematisch. Es wird vermutet, daß Schmelzinjektionen mit alkali-basaltischer Affinität, von denen die Gesteinsgruppe II herstammt, eine Diffusions-Metasomatose der Gesteinsgruppe I verursacht hat.Es wird angenommen, daß metasomatisierte Peridotite an der Basis von alkali-basaltischem Magmatismus weft verbreitet sind, wie zum Beispiel in Südwest-Japan. Einige in der Literatur aufscheinende Fe-reiche Lherzolith- and Harzburgit-Xenolithe sind möglicherweise metasomatisch entstanden.

---

---

With 6 Figures     

Long-term temperature monitoring in a borehole drilled into the Nojima Fault, southwest Japan

Abstract Long-term monitoring of temperature distribution in an active fault zone was carried out using the optical fiber temperature-sensing technique. An optical fiber cable was installed in a borehole drilled into the Nojima Fault in Awaji Island, south-west Japan, and the temperature profile to a depth of 1460 m had been measured for 2.5 years (July 1997–January 2000). Although the obtained temperature records showed small temporal variations due to drifts of the measurement system all along the cable, local temperature anomalies were detected at two depths. One at around 80 m seems to correspond to a fracture zone and may be attributed to groundwater flow in the fracture zone. This anomaly had been stable throughout the monitoring period, whereas the other anomaly at around 500 m was a transient one. The water level in the borehole could be estimated from the diurnal temperature variations in the uppermost part of the borehole and may provide information on the hydrological characteristics of the fault zone, which is connected to the borehole through perforations on the casing pipe. Except for these minor variations, the temperature profile had been very stable for 2.5 years. The conductive heat flow calculated from this profile and the thermal conductivity measured on core samples increases with depth, probably resulting from errors in thermal conductivity due to sampling problems and/or from advective heat transfer by regional groundwater flow. Assuming that the middle part of the borehole (less fractured granite layer) is least affected by these factors, heat flow at this site is estimated to be approximately 70 mW/m².     

Occurrence of Spadella cephaloptera During One Year at Ischia Island (Gulf of Naples)

Abstract. The life cycle of the benthic arrowworm, Spadella cephaloptera , which inhabits the Posidonia meadow at Ischia (Gulf of Naples, Italy), was examined by a one-year systematic sampling survey and by laboratory culture. The seasonal fluctuations in abundance and the reproductive characteristics indicate that there were two generations of S. cephaloptera in one year; these generations have a different life span. The habitat of S. cephaloptera depends on the growth of the Posidonia meadow; the influence of different factors on the S. cephaloptera population, especially of the Posidonia vagile fauna, is discussed.     

Evolving fluid composition during prograde metamorphism in subduction zones: A new approach using carbonate-bearing assemblages in the pelitic system

The changing XCO₂ in fluids during the progressive metamorphism in Sanbagawa belt of the Cretaceous subduction zone, Japan, was estimated by a newly proposed method. The subduction zone meta-sediments are characterized commonly by four-phase assemblages in the CaO–NaAlO₂–KAlO₂–Al₂O₃ system with excess quartz and a CO₂–H₂O binary fluid phase. Using the common assemblage of calcite–albite–muscovite–clinozoisite, XCO₂ of the fluid was estimated to be from about 0.0001–0.0005 (the lowest grade chlorite zone), through 0.004–0.01 (garnet zone), 0.01–0.05 (albite–biotite zone) to 0.06–0.2 (oligoclase–biotite zone).The paragenetic relationship of meta-sediments from the subduction zones was compared in a wide P–T range to cover the stability fields of aragonite and jadeite. As a result, an excellent P–T–XCO₂ relationship was delineated to serve as a quantitative monitor for the evolving fluid composition during the progressive metamorphism in subduction zones.     

Geothermal constraints on the hydrological regime of the TAG active hydrothermal mound, inferred from long-term monitoring

During August 1994 to March 1995, a period that included ODP Leg 158 drilling, bottom-water and sub-bottom temperatures were continuously logged by a long-term temperature monitoring system ‘Daibutsu’ at the base of the central black-smoker complex (CBC) and within the low heat flow zone at the TAG hydrothermal mound on the Mid-Atlantic Ridge. The temperature of hydrothermal fluid at CBC was also measured with a small high-temperature probe ‘Hobo’. Bottom-water temperature variations measured with Daibutsu at both sites have predominant semi-diurnal periods, causing the sub-bottom temperatures to fluctuate at these periods with reduced amplitudes and phase delays at sub-bottom depths. Seawater entrainment into the mound has been previously suggested at the low heat flow zone. We quantitatively evaluate the seawater entrainment rate at both sites from a one-dimensional numerical model, combined with a heat conduction model for the semi-diurnal variations. The entrainment rate of seawater at the base of CBC is estimated as 1.3±0.5×10⁻⁵ m/s, at least from August 17 to 30, 1994. On the other hand, the seawater entrainment rate at the low heat flow zone was undetected by long-term temperature monitoring at shallow sub-bottom depth. Nevertheless an increase in heat flow observed at the low heat flow zone during ODP drilling can be interpreted as a decrease in the entrainment rate of seawater. Before ODP Leg 158, Daibutsu measured three sub-bottom temperature anomalies at the base of CBC not derived from bottom-water temperature variations and Hobo also detected a CBC fluid temperature anomaly, indicating some natural changes in fluid flow within the mound. Daibutsu and Hobo also measured temperature anomalies during and after drilling at the ODP TAG-1 area. The Hobo temperature anomalies are inferred to have occurred when the cold fluid entrained through the drill holes at TAG-1 site reached or cooled the main fluid path to CBC. The entrained seawater through the drill holes appears to have contributed to dissolution and precipitation of anhydrite within the mound and perhaps affected the local permeability structure inside the mound. The temperature anomalies measured with Daibutsu at the base of CBC may have been induced by the change in the fluid flow pattern as a result of such permeability changes within the mound.     

Shear wave velocity measurement during a standard penetration test

An experiment was carried out to develop a technique to measure shear wave velocity simultaneously with the standard penetration test popular in soil engineering. In the standard penetration test an impact at the bottom of a borehole is produced by weight dropping and may be expected to generate seismic waves. A three-component geophone was set on the ground surface near the borehole and the waves generated were recorded with a magnetic recorder at successive depths of the penetration test. The predominance of the SV wave obtained with this simple method was assured by measurement of the particle orbit. Signal amplitudes decrease with depth and become less than the noise level at a certain depth. Therefore records from deeper sources must be processed to disclose the shear waves. Since waveforms of SV events generated by blows of the penetration test at a given depth are very similar, the signal to noise ratio would be expected to be improved by a stack of wave trains. A paste-up of the radial component after stacking was compared with that before stacking and a refinement was clearly recognized. A vertical distribution of shear wave velocity was obtained by reading the onset time at each depth. Shear wave velocities thus obtained were compared with N values from the standard penetration test and specific resistivities from electrical logging in the same borehole. The data were mutually consistent. This experiment showed that a convenient, precise shear wave velocity measurement can be conducted during the routine work of a standard penetration test.     

Intergrowth textures of diaplectic glass and crystal in shock-loaded P-anorthite

The intergrowth of diaplectic glass and primitive anorthite has been observed in fragments shocked to 300 kbar. The textures observed by electron microscopy are similar to those produced in shocked quartz crystals. The diffuseness of reflections, related to antiphase domains, show no noticeable change in comparison with unshocked specimens. These results indicate that no gradual change in original domain size occurs and that the transformation of primitive anorthite to diaplectic glass occurs abruptly.     

Timeline analysis and wavelet multiscale analysis of the AKARI All-Sky Survey at 90 μm

We present a careful analysis of the point-source detection limit of the AKARI All-Sky Survey in the WIDE-S 90-μm band near the North Ecliptic Pole (NEP). Timeline analysis is used to detect IRAS ( Infrared Astronomy Satellite ) sources and then a conversion factor is derived to transform the peak timeline signal to the interpolated 90-μm flux of a source. Combined with a robust noise measurement, the point-source flux detection limit at signal-to-noise ratio  (S/N) > 5  for a single detector row is  1.1 ± 0.1 Jy  which corresponds to a point-source detection limit of the survey of ∼0.4 Jy.
Wavelet transform offers a multiscale representation of the Time Series Data ( tsd ). We calculate the continuous wavelet transform of the tsd and then search for significant wavelet coefficients considered as potential source detections. To discriminate real sources from spurious or moving objects, only sources with confirmation are selected. In our multiscale analysis, IRAS sources selected above 4σ can be identified as the only real sources at the Point Source Scales. We also investigate the correlation between the non- IRAS sources detected in timeline analysis and cirrus emission using wavelet transform and contour plots of wavelet power spectrum. It is shown that the non- IRAS sources are most likely to be caused by excessive noise over a large range of spatial scales rather than real extended structures such as cirrus clouds.