莱州湾南岸全新世相对海平面变化重建

在对莱州湾南岸8个钻孔沉积物沉积结构及有孔虫特征分析基础上,识别相关海面标志层位,辅以加速器质谱AMS14C测年,重建了全新世相对海面变化历史,并讨论了海面变化的沉积响应及控制因素。约9200cal BP以前,海面快速上升,研究区海侵时海面于-21.5m左右;9200~8400cal BP海面上升速率减缓至约2mm/a;8400~8000cal BP海面由-14m快速上升至-5.5m,速率约为33mm/a;8000~7600cal BP,海面持续数百年停滞或微弱下降;7600~7000cal BP海面由-5.5m快速上升至0m以上,速率至少约为13mm/a;7000~6000cal BP海面缓慢上升至+2~+3m位置,速率约为3mm/a;约6000cal BP以后海面缓慢下降至现今水平。约9200cal BP以前、8400~8000cal BP、7600~7000cal BP时期的3次海面快速上升,是MWP-1C融水脉冲、诱发8.2ka冷事件的融水脉冲,以及MWP-2融水脉冲的中纬度地区响应。中全新世全球冰融趋于停滞后,由于研究区沉积盆地沉降速度较慢,在冰川均衡调整效应下,使+2~+3m的相对高海面得以呈现。     

渤海湾巨葛庄贝壳堤与下伏泥层有孔虫组合的海面变化意义

根据巨葛庄贝壳堤及下伏泥层的有孔虫研究,讨论了贝壳堤底板和下伏泥层各类沉积环境的海面意义,以此作为海面标志点重建的古海面误差范围为±0.225~±0.625m。结合该贝壳堤底板和下伏泥层顶板的年龄数据,重建了3900~3300cal BP时的海面高度为-2.955~-2.715m。     

浮托安装进船过程中护舷碰撞力实测研究

浮托安装法广泛应用于大型组块海上安装。导管架平台上部组块浮托安装进船过程中,风、浪、流引起的浮托驳船横向运动造成浮托驳船与导管架桩腿的碰撞,碰撞力可能会对导管架结构造成损伤。陆丰7-2上部组块浮托安装中,为了监测碰撞力大小,设计了碰撞力海上监测系统。通过在导管架外侧四个桩腿上安装光纤光栅应变传感器对碰撞过程中导管架桩腿进行应力监测,进而计算碰撞力。对碰撞过程,载荷作用位置、方向进行简化,并对载荷大小及垂向作用位置对计算的影响进行了研究。结构分析模型简化后,测点von-Mises应力与碰撞力大小成正比,对导管架整体结构建模计算并取局部结构计算比例系数,结合应力实测数据计算出进船过程中驳船对导管架桩腿碰撞力。     

塔里木盆地东南缘下—中侏罗统煤层煤岩、煤质特征分析

塔里木盆地东南缘下—中侏罗统煤层沿阿尔金山前断续分布,其煤岩、煤质与典型的西北侏罗纪煤层具有明显不同。通过对和田布雅、于田普鲁、且末红柳沟等煤矿主采煤层样品进行煤岩、煤质鉴定及煤化指标等一系列综合研究分析,结果表明,主采煤层以光亮煤、半亮煤为主,其次是半暗煤、暗淡煤;煤岩组分以镜质组为主,壳质组含量少,具中-高镜惰比。因成煤沼泽的还原程度促进了无机硫分的形成,煤中全硫含量随镜质组含量的增加呈现逐渐增高的趋势,且煤层硫分与灰分整体具有明显的负相关关系。此外,煤层挥发分受不同种类硫分的影响,亦有明显差异性变化。在民丰凹陷中-高硫煤中,硫分以无机硫为主,随着硫分的升高挥发分亦有升高趋势;瓦石峡凹陷中-低硫煤受有机硫控制,对挥发分产率的影响不明显。民丰凹陷煤层的灰分指数高于瓦石峡凹陷,可见后者的成煤沼泽环境潜水面要比前者高得多。针对上述诸多因素分析,进一步揭示塔东南地区煤岩、煤质多样性变化受断陷湖盆以及局部水体较深的还原型沼泽环境控制,最终形成了中-高挥发分、中-低灰分、中-低硫分的煤质及富镜贫惰的煤岩特征。     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

Isotope Geochronologic and Geochemical Constraints on the Magmatic Associations of the Collisional Orogenic Zone in the West Kunlun Orogen,China

The Jiajiwaxi pluton in the southern portion of the West Kunlun Range can be divided into two collision–related intrusive rock series, i.e., a gabbro–quartz diorite–granodiorite series that formed at 224±2.0 Ma and a monzonitic granite–syenogranite series that formed at 222±2.0 Ma. The systematic analysis of zircon U-Pb geochronology and bulk geochemistry is used to discuss the magmatic origin(material source and thermal source), tectonic setting, genesis and geotectonic implications of these rocks. The results of this analysis indicate that the parent magma of the first series, representing a transition from I-type to S-type granites, formed from thermally triggered partial melting of deep crustal components in an early island–arc–type igneous complex, similar to an I-type granite, during the continental collision orogenic stage. The parent magma of the second series, corresponding to an S-type granite, formed from the partial melting of forearc accretionary wedge sediments in a subduction zone in the late Palaeozoic–Triassic. During continued collision, the second series magma was emplaced into the first series pluton along a central fault zone in the original island arc region, forming an immiscible puncture-type complex. The deep tectonothermal events associated with the continent–continent collision during the orogenic cycle are constrained by the compositions and origins of the two series. The new information provided by this paper will aid in future research into the dynamic mechanisms affecting magmatic evolution in the West Kunlun orogenic belt.     

First Report of Zircon U‐Pb Ages from Lubei Cu‐Ni Sulfide Deposit in East Tianshan of Central Asian Orogenic Belt,NW China

正Objective The East Tianshan mafic-ultramafic rocks belt mainly produced in the eastern Jueluotage belt is an important part of the Central Asia Orogenic Belt(CAOB).The wellknown deposits including Huangshan,Huangshandong,Tulaergen,Hulu,Xiangshan were have been consecutively discovered in this belt(Duan Xingxing et al.,2016).The new discovery of the Lubei Cu-Ni sulfide deposit in recent     

高压超高压变泥质岩适用的地质温压计评述

高压超高压变泥质岩形成温压条件及p-T演化轨迹是高压超高压变质作用研究的重要内容。本文介绍了高压超高压变泥质岩适用的几种地质温压计,包括石榴子石-多硅白云母Fe~(2+)-Mg交换温度计、石榴子石-绿泥石Fe~(2+)-Mg交换温度计、硬绿泥石-绿泥石Fe~(2+)-Mg交换温度计、多硅白云母Si含量压力计、金红石Zr含量温度计、榍石Zr含量温压计、锆石Ti含量温度计、石英Ti含量温度计以及氧同位素温度计,并对上述温压计的适用条件及使用时的注意事项做了简要评述。     

内蒙古狼山地区早石炭世角闪辉长岩、花岗闪长岩的岩石成因及构造意义

内蒙古狼山山脉西侧分布有大面积的晚古生代岩浆岩,时代集中在早石炭世—晚二叠世,早石炭世角闪辉长岩、花岗闪长岩体出露于潮格温都尔镇西侧。角闪辉长岩体呈岩滴状产出,被花岗闪长岩体侵入,LA-ICP-MS锆石U-Pb年龄显示,角闪辉长岩的~(206)Pb/~(238)U加权平均年龄为329.0±2.3 Ma,花岗闪长岩的~(206)Pb/~(238)U加权平均年龄为331.1±0.9 Ma~330.0±4.2 Ma。花岗闪长岩暗色矿物以角闪石为主,富钠(Na2O=3.48%~4.46%),高钠钾比值(Na2O/K2O=1.03~2.39),钙碱性系列,P2O5-SiO_2之间存在较好的负相关性,岩石地球化学特征具Ⅰ型花岗岩的特点。Hf同位素及元素地球化学特征指示了角闪辉长岩及花岗闪长岩均来自于受地壳混染的亏损地幔,为同源岩浆演化的产物。角闪辉长岩及花岗闪长岩稀土元素配分型式一致,均为轻稀土元素富集,重稀土元素亏损,具弱的负Eu异常;角闪辉长岩富集Ba、Sr,亏损Nb、Ta、Zr、Hf;花岗闪长岩富集大离子亲石元素Rb、K、Pb、Sr,不同程度地亏损高场强元素Nb、Ta、P、Ti,总体反映了岩浆弧的地球化学特征。结合区域地质背景,早石炭世狼山地区侵入岩岩石组合为角闪辉长岩(闪长岩)+石英闪长岩+花岗闪长岩,认为狼山地区早石炭世处于大陆边缘弧构造背景。     

地物化方法在航磁异常查证中的应用

航磁异常查证是矿产勘查中的一个重要环节,其目的是通过地面查证,确定异常是否存在,追踪异常源,了解异常源所处的地质环境,对异常作出客观评价,提出进一步工作的建议,为后续资料解释提供依据.通过使用地物化综合方法对黑C-2011-02243号异常查证发现：地质剖面测量和土壤地球化学测量可在地表发现较好的找矿线索;高精度磁测及激电中梯测量则反映了深部地质体及矿化特征.依据查证结果认为,在进行航磁异常查证工作时,可优先进行剖面性的地质、高精度磁法及土壤地球化学测量工作;在分析上述测量结果的基础上安排剖面性的电法测量;如存在进一步找矿信息,可安排面积性物化探测量及工程验证工作.