The H2/CO ratio of emissions from combustion sources: comparison of top-down with bottom-up measurements in southwest Germany

The hydrogen-to-carbon monoxide (H₂/CO) emission ratio of anthropogenic combustion sources was determined from more than two years of quasi-continuous atmospheric observations in Heidelberg (49°24' N, 8°42' E), located in the polluted Rhein-Neckar region. Evaluating concurrent mixing ratio changes of H₂ and CO during morning rush hours yielded mean molar H₂/CO ratios of 0.40 ± 0.06, while respective results inferred from synoptic pollution events gave a mean value of 0.31 ± 0.05 mole H₂/mole CO. After correction for the influence of the H₂ soil sink on the measured ratios, mean values of 0.46 ± 0.07 resp. 0.48 ± 0.07 mole H₂/mole CO were obtained, which are in excellent agreement with direct source studies of traffic emissions in the Heidelberg/Mannheim region (0.448 ± 0.003 mole H₂/mole CO). Including results from other European studies, our best estimate of the mean H₂/CO emission ratio from anthropogenic combustion sources (mainly traffic) ranges from 0.45 to 0.48 mole H₂/mole CO, which is about 20% smaller than the value of 0.59 mole H₂/mole CO which is frequently used as the basis to calculate global H₂ emissions from anthropogenic combustion sources.     

Vegetation and climate history in the Westeifel Volcanic Field (Germany) during the past 11 000 years based on annually laminated lacustrine maar sediments

Lakes Holzmaar and Meerfelder Maar are located in the Westeifel Volcanic Field less than 10 km apart. Both maar lakes are well known for their annually laminated (varved) sediments covering the past 15 000 years. Here, we focus on reconstructing the history of Holocene vegetation, human impact and climate using high-resolution pollen data. Detailed correlation between the two records using palynologically defined tie-points provides for the first time a test of the precision of the individual varve chronologies. The high-resolution pollen records of both Holzmaar and Meerfelder Maar show continuous natural successions of vegetation during the early and mid-Holocene controlled by the development of soil, climate, immigration and competitive expansion of thermophilous tree species. From 6500 varve yr BP onwards, human impact became an increasingly more important factor. Given the high chronological precision of both records, regional similarities, but also local differences of anthropogenically influenced vegetation changes, can be recognized. The reconstructed July temperature between 8500 and 5000 varve yr BP is around 1 °C higher than today, most likely in response to higher summer insolation related to orbital forcing. High variability of reconstructed July and January temperatures as well as annual precipitation around 5000 varve yr BP is a prominent climatic signal. This is consistent with other records in several areas of Europe which also identify this period as climatically highly variable.     

Controls on the alluviation of oxbow lakes by bed‐material load along the Sacramento River,California

Differences in the nature and quantity of sediment filling oxbow lakes have significant implications for the evolution of meandering rivers and the development of floodplains, influencing rates of meander migration and the valley width over which migration takes place. In an effort to identify the controls on the alluviation of oxbow lakes by coarse bed material, this study examined the sedimentary records stored within oxbow lakes of the Sacramento River of California, USA, and found that the volume of gravel in storage correlated negatively with the diversion angle separating flow between the river channel and the entrance into each lake. A method was devised for estimating the original channel bathymetry of the studied lakes and for modelling the hydraulic and sediment‐transport effects of the diversion angle within channels recently abandoned by meander cut‐off. The diversion angle determines the width of a flow separation within the abandoned‐channel entrance, reducing the discharge diverted from the river channel and thus limiting the ability of the abandoned channel to transport bed material. Aggradation rates are faster within entrances to abandoned channels with high diversion angles, resulting in the rapid isolation of lakes that store only a small volume of coarse‐grained sediment. Aggradation rates are slower within channel entrances where diversion angles are low, resulting in the slow transitioning of such channels into oxbow lakes with a larger and more extensive accumulation of coarse‐grained sediment. These findings compare well with observations in other natural settings and the mechanism which is described for the control of the diversion may explain why some oxbow lakes remain as open‐water environments for centuries, whereas others are filled completely within decades of cut‐off.     

Molecular identification of the extinct mountain goat, Oreamnos harringtoni (Bovidae)

Campos, P. F., Willerslev, E., Mead, J. I., Hofreiter, M. & Gilbert, M. T. P. 2009: Molecular identification of the extinct mountain goat, Oreamnos harringtoni (Bovidae). Boreas , 10.1111/j.1502-3885.2009.00111.x. ISSN 0300-9483.
Harrington's mountain goat ( Oreamnos harringtoni ), an extinct North American herbivore, is one of the least known mammals of the Pleistocene. Fossil specimens are predominantly known from dry cave localities throughout the arid American west – the Grand Canyon, Colorado Plateau, Nevada and Mexico. Morphological analysis of the recovered fossils suggests a close phylogenetic relationship between Harrington's mountain goat and the extant mountain goats from the American northwest ( Oreamnos americanus ). However, the degree of genetic similarity between the two species, and their overall placement within the Caprinae, is not clear. In this study, we recovered and sequenced the first DNA fragments from O. harringtoni in order to investigate these relationships. Genetic analysis further supports the morphological hypothesis that O. harringtoni and O. americanus are two distinct species.     

Low-Temperature, Low-Pressure Metamorphism of Mn-rich Rocks in the Lienne Syncline, Venn--Stavelot Massif (Belgian Ardennes), and the Role of Carpholite

Low-grade Mn-rich metamorphic rocks of the Lienne syncline (westernpart of the Venn–Stavelot Massif, Belgian Ardennes) havebeen re-examined to evaluate the petrological significance ofcarpholite proper, Mn^2$ Al₂[Si₂O₆](OH)₄. Metamorphic P–Tconditions of these rocks are estimated to be {small tilde}300C1–2 kbar, which is in accordance with the exclusive occurrenceof carpholite in low-P rocks such as hydrothermal environmentselsewhere. Carpholite of the Lienne syncline exclusively occursin quartz-rich segregations. Its composition is close to end-member.Thermodynamic calculations confirm that carpholite is a stablephase at low-pressure–low-temperature conditions, in contrastto ferro- and magnesiocarpholite, which are high-pressure minerals.No information is available on the high-P behaviour of carpholite.The occurrence of carpholite is partly closely associated withspessartine-bearing country rocks, or carpholite is alteredto assemblages with spessartine, sudoite, chlorite, muscoviteand paragonite. Spessartine in these rocks contains minor amountsof hydrogarnet component {(H/4)/[Si$(H/4)] = 0.03–0.06}.The presence of carpholite-spessartine assemblages in theselow-P rocks is in contrast to high-pressure metamorphic rocksfrom other areas, where parageneses such as fem/magnesiocarpholite–chloritoidor magnesiocarpholite–chlorite–kyanite occur. Theappearance of carpholite–garnet assemblages in low-P Mn-richrocks can be explained by contrasting phase relations becauseof a high Mn–Mg partition coefficient between the mineralsunder consideration. In rhodo-chrosite-bearing veins in theLienne syncline, nearly complete replacement of carpholite byspessartine and chlorite is due to the continuous reaction carpholite$ rhodochrosite $ quartz = spessartine $ chlorite $ H₂O $ CO₂,which defines a very low X_co, in the temperature range underconsideration. It is suggested that spessartine (possibly containingsome hydrogarnet component), during prograde metamorphism atlow pressure, becomes stable at a temperature of {small tilde}300C KEY WORDS: carpholite; spessartine; sudoite; Venn–Stavelot Massif; Ardemes ^*Corresponding author. Fax: x49/531/3918131. e-mail: t.theye{at}tu.bs.de     

Vertically resolved dust optical properties during SAMUM: Tinfou compared to Ouarzazate

Vertical profiles of dust key optical properties are presented from measurements during the Saharan Mineral Dust Experiment (SAMUM) by Raman and depolarization lidar at two ground-based sites and by airborne high spectral resolution lidar. One of the sites, Tinfou, is located close to the border of the Sahara in Southern Morocco and was the main in situ site during SAMUM. The other site was Ouarzazate airport, the main lidar site. From the lidar measurements the spatial distribution of the dust between Tinfou and Ouarzazate was derived for 1 d. The retrieved profiles of backscatter and extinction coefficients and particle depolarization ratios show comparable dust optical properties, a similar vertical structure of the dust layer, and a height of about 4 km asl at both sites. The airborne cross-section of the extinction coefficient at the two sites confirms the low variability in dust properties. Although the general picture of the dust layer was similar, the lidar measurements reveal a higher dust load closer to the dust source. Nevertheless, the observed intensive optical properties were the same. These results indicate that the lidar measurements at two sites close to the dust source are both representative for the SAMUM dust conditions.     

Excess 210Po in the coastal atmosphere

Many researchers have reported the widespread occurrence of excess ²¹⁰ Po in the global atmosphere and suggested probable sources such as resuspension of top soils, stratospheric aerosols, sea spray of the surface micro‐layer, volcanic emission, and bio‐volatile ²¹⁰Po species from the productive ocean. We have observed excess ²¹⁰Po on aerosols in the coastal atmosphere of the Chesapeake and Delaware Bays. On‐board measurements in the Chesapeake Bay atmosphere show that the increase of this excess ²¹⁰Po is dependent upon wind speed. Simultaneously measured activity ratios of ⁷Be/²¹⁰Pb and ²¹⁰Pb/²²²Rn argue against either higher altitude air or continental soils as the source of this excess. We hypothesize that the excess ²¹⁰Po originates mainly from surface waters either by the sea‐spray of the surface microlayer, or more likely, by gas exchange. We conclude gas exchange as the mechanism since the polonium excess increases linearly with wind speed over a threshold of 3 m s⁻¹(mean) similar to other gases (i.e., CO₂, SF₆ , and DMS). In addition, higher ²¹⁰Po excess with lower ²²²Rn is observed in on‐shore marine air at Lewes, DE. This suggests sea‐air exchange of volatile Po along with other bio‐volatile species (i.e., DMS, DMSe, and MMHg) in the coastal productive ocean during high wind speeds.     

Evidence of iceberg-ploughing in a subaqueous ice-contact fan, glacial Lake Rinteln, NW Germany

The Coppenbrügge subaqueous ice‐contact fan complex of early Saalian age is about 10 km long and up to 10 km wide and is composed of offset‐stacked fan clinothems that are transgressive‐regressive sequences formed during an overall lake level rise. The individual fan bodies consist of coarse gravel in the ice‐proximal part, passing distally into sandy facies and showing large‐scale foreset bedding. The iceberg scour recognized in an open‐pit outcrop is up to 1.5m deep, up to 2m wide and cut in undisturbed mid‐fan deposits. The scour‐fill can be traced laterally for about 15m and consists of sheared sand and, in the frontal zone, of downbent overlying strata surrounded by a zone of deformed sediments. The deformed sediment produced by the iceberg keel's shearing of the trough walls is a sand mass containing angular soft‐sediment clasts that show internal folds and fractures. The basal surface of the deformed sediment is a nearly horizontal shear plane, steepening up laterally as a discrete thrust and showing a flat‐ramp‐flat geometry. The scour was formed by the iceberg keel's ploughing the substrate and pushing the sediment sideways and frontally, forming a ridge of deformed sediments at the trough end. This ridge was concurrently eroded by an accompanying meltwater underflow which apparently developed a horseshoe system of scouring vortices around the grounded iceberg. The current's scour was filled with massive, non‐stratified sand deposited rapidly from turbulent suspension. The iceberg eventually broke up and its keel part was buried. As these ice fragments gradually melted, the space was closed by normal faulting and downbending of overlying strata. The collapsing scour‐fill became partly liquified, and the resulting water‐escape structures cut the normal faults and the overlying deposits. Though produced chiefly by tangential shear strain, iceberg‐ploughing features are readily distinguishable from other glaciotectonic deformations. They can serve as a diagnostic criterion for glaciolacustrine or glaciomarine environments and the distinguishing of ice‐contact subaqueous fans from ice‐contact deltas in the stratigraphic record.