Strength Analysis on Brace Structure for Semi-Submersible in Consideration of Wave Slamming

Slamming on bracings of column stabilized units shall be considered as a possible limiting criterion under transit condition based on the requirements in DNV-OS-C103. However, the wave slamming loads under survival condition were ignored for the strength analysis of the brace structures in many semi-submersible projects. In this paper, a method of strength analysis of brace structure is proposed based on the reconstruction and extrapolation of numerical model. The full-scale mooring system, the wind, wave and current loads can be considered simultaneously. Firstly, the model tests of the semi-submersible platform in wind tunnel and wave tanker have been carried out. Secondly, the numerical models of the platform are reconstructed and extrapolated based on the results of model tests. Then, a nonlinear numerical analysis has been conducted to study the wave slamming load on brace in semi-submersible platform through the reconstructed and extrapolated numerical model. For the randomness of wave load, ten subcases under each condition have been carried out. The value of the 90% Gumble distribution values of the ten subcases are used. Finally, the strength on brace structure has been analyzed considering the wave slamming. The wave slamming loads have been compared between the survival condition and transit condition with the method. The results indicate that wave slamming under survival condition is more critical than that under transit condition. Meanwhile, the wave slamming is significant to the structural strength of the brace. It should be overall considered in the strength analysis of the brace structure.     

Bathymetry,substrate and fishing areas of Southeast Atlantic high-seas seamounts

Most of the Southeast Atlantic Ocean is abyssal, and global bathymetries suggest that only ～3.2% of the areas beyond national jurisdiction (ABNJ; also known as the high seas, as defined in the United Nations Convention on the Law of the Sea [UNCLOS]) are shallower than 2 500 m. This study mapped bathymetry and characterised substrates in selected seamount summit areas, including several that have been or may become fishing areas. The southernmost location, the Schmitt-Ott Seamount, has exposed volcanic bedrock with surrounding flats covered by thin biogenic sediments and/or coral rubble that appears ancient. At Wüst, Vema, Valdivia and Ewing seamounts the basaltic base appears to be overlain by coral caps and other coral substrates (sheets, rubble). Adjacent summit plains have biogenic sediments of varying thickness. Vema has a flat, roughly circular summit, <100 m deep, with the shallowest point being a 22-m-deep summit knoll; the upper slopes have ancient coral framework, but the summit has a mixture of coralline and volcanic rock and coarse sediments, including extensive areas with coralline algae and kelp forests. Valdivia Bank is a 230-m-deep, flat, rocky area (～11 × 5 km), protruding steeply from the extensive multi-summit Valdivia subarea of the Walvis Ridge. The distribution of past fisheries in the Convention Area of the South East Atlantic Fisheries Organisation (SEAFO) was considered in relation to the new information on bathymetry and substrate.     

Average grain-size parameters of unlithified sediments in the World Ocean

The high diversity of grain-size parameters of marine and oceanic sediments is determined by hydrodynamical and gravitational processes. Grain-size spectra of the sediments in the World Ocean are represented by two main types. Filtering organisms that passively inherit the proportions of clayey fractions in suspended matter only accelerate the deposition of fine particles, not influencing their distribution at the bottom.     

Thermohydrodynamics of the ocean decay of nonlinear oscillations in a bounded basin of variable depth

We study the time decay of surges of a liquid in a round shallow-water basin of variable depth. The dependence of the logarithmic decrement of oscillations on the bottom topography and wind velocity is analyzed. The role of convective acceleration and bottom friction in the formation of both the level of vertical displacement of the surface of the basin and the velocity field of horizontal wave currents is estimated. __________ Translated from Morskoi Gidrofizicheskii Zhurnal, No. 2, pp. 3–11, March–April, 2006.     

Simulation of additive transport from the land surface on the basis of experimental data on heat transfer in the atmospheric surface layer

A method is proposed to study the transport of a passive additive in the atmospheric surface layer with the use of the atmospheric transfer function. This method makes it possible to estimate the spatial distribution of the concentration of a passive additive in the atmospheric surface layer from the additive’s surface source without experimentally determining the vertical profile of the transport coefficient or without resorting to various hypotheses for the character of its behavior. The transfer function, which contains the information on the wind-field structure, can be obtained from simple one-point measurements of surface-and air-temperature fluctuations and from subsequent spectral processing of the data. The effects of the wind-velocity profile and turbulence on the spatial distribution of additive concentration are assessed. This method allows one to simplify experiments during development and verification of the models of atmospheric diffusion. This method may also be useful in emergency situations to predict the propagation of hazardous additives.     

First results from the North Iceland experiment

Between June 2004 and September 2004 a temporary seismic network was installed on the northern insular shelf of Iceland and onshore in north Iceland. The seismic setup aimed at resolving the subsurface structure and, thus, the geodynamical transition from Icelandic crust to typical oceanic crust along Kolbeinsey Ridge. The experiment recorded about 1,000 earthquakes. The region encloses the Tjörnes Fracture Zone containing the Husavik–Flatey strike-slip fault and the extensional seismic Grimsey Lineament. Most of the seismicity occurs in swarms offshore. Preliminary results reveal typical mid-ocean crust north of Grimsey and a heterogeneous structure with major velocity anomalies along the seismic lineaments and north–south trending subsurface features. Complementary bathymetric mapping highlight numerous extrusion features along the Grimsey Lineament and Kolbeinsey Ridge. The seismic dataset promises to deliver new insights into the tectonic framework for earthquakes in an extensional transform zone along the global mid-ocean ridge system.     

Composition and quantitative distribution of macrozoobenthos in Amur Bay

The data on the species composition, trophic structure, and distribution of macrozoobenthos in Amur Bay obtained in 2001 are presented. Long-term changes in the benthos are analyzed. In 2001, the total benthos biomass significantly increased, although the parameters of the species richness declined as compared to 1986–1989. In 2001, as well as in the 1970s and 1980s, the benthos trophic structure was characterized by the prevalence of deposit feeders. The entire structure of the benthos is evaluated as an eutrophic one. Eutrophication of the bay is considered to be the most probable cause of the negative changes in the benthic communities of the bay in 2001, as well as 15 years ago.     

Effect of upward internal flow on dynamics of riser model subject to shear current

Numerical study about vortex-induced vibration(VIV) related to a flexible riser model in consideration of internal flow progressing inside has been performed.The main objective of this work is to investigate the coupled fluid-structure interaction(FSI) taking place between tensioned riser model,external shear current and upward-progressing internal flow(from ocean bottom to surface).A CAE technology behind the current research which combines structural software with the CFD technology has been proposed.According to the result from dynamic analysis,it has been found that the existence of upward-progressing internal flow does play an important role in determining the vibration mode(/dominant frequency),vibration intensity and the magnitude of instantaneous vibration amplitude,when the velocity ratio of internal flow against external current is relatively high.As a rule,the larger the velocity of internal flow is,the more it contributes to the dynamic vibration response of the flexible riser model.In addition,multi-modal vibration phenomenon has been widely observed,for asymmetric curvature along the riser span emerges in the case of external shear current being imposed.