Hydrothermal fracture controlled vein type uranium mineralization in the Paleoproterozoic Bijawar Group of rocks,Sonrai basin,Lalitpur district,U.P. – Fresh findings from subsurface borehole data

Sonrai basin, located along the southwestern margin of Bundelkhand Granite-Gneiss Complex (BGC) is known for its base metal and phosphorite mineralization. Uranium mineralization of appreciable grade and thickness was reported in Pisnari block in the northern part of this basin during sub-surface exploration activity in 1976-97. This was in the form of uranium-bitumin association within fractures in the carbonate-terrigenous sediments of Gorakalan shale, Rohini carbonate and Bandai sandstone of Sonrai Formation of Bijawar Group. Similar mineralization was also noted within the lower chloritic shale member of Solda Formation of the same Group. During subsequent drilling activity at a later phase (2005-09), uranium rich zones within Rohini carbonate and chloritic shale members were corroborated by the interception of mineralized bands in two boreholes drilled near Pisnari. Petrographic study of radioactive core samples reveal that uranium mineralization is closely associated with globular carbonaceous matter and sulphides along the fractures. Uranium is either adsorbed in carbonaceous matter or occurs as ultrafine inclusions of coffinite within carbonaceous matter. An additional phase of secondary uranium mineral (uranophane) is also noted in one of the boreholes. The uranium minerals, in association with sulphides, fill up moderately dipping fractures (approximately 15o towards North) which are oblique to the core axis of the inclined borehole and thus, the mineralization is characterized as hydrothermal fracture-controlled vein type mineralisation. C-HN- S analysis of carbonaceous matter occurring in close association with the uranium minerals reveal heterogeneity in composition with respect to carbon and sulfur. The present paper aims at discussing the geological, petrological and radiometric aspects of this mineralization, so as to enhance the understanding of the same.     

Facies Structure and Quantitative Parameters of Pleistocene Sediments of the Bering Sea

Lithofacies zoning is described for the first time for the Neo- and Eopleistocene of the Bering Sea. Four lithofacies sedimentation zones are distinguished: (I) terrigenous; (II) siliceous–terrigenous; (III) siliceous, and (IV) volcanoterrigenous ones. Corresponding maps were treated using Ronov volumetric method to quantify sedimentation parameters for distinguished lithofacies zones (subzones) and types of Pleistocene sediments. It was revealed that terrigenous sediments predominate over other sediments. Accumulation of the terrigenous sediments was more intense (by 1.4 times) in the Neopleistocene than in the Eopleistocene. The sedimentation rate of siliceous sediments of the Bowers Ridge in the Eopleistocene was two times higher than in the Neopleistocene.     

Formation by silicate–fluoride + phosphate melt immiscibility of REE-rich globular segregations within aplite dikes

Aplite dikes intruding the Proterozoic 1.42(±?3) Ga Longs Peak-St. Vrain Silver Plume-type peraluminous granite near Jamestown, Colorado, contain F, P, and rare earth element (REE)-rich globular segregations, with 40–46% REE, 3.7–4.8 wt% P₂O₅, and 5–8 wt% F. A combination of textural features and geochemical data suggest that the aplite and REE-rich globular segregations co-existed as two co-genetic liquids prior to their crystallization, and we propose that they are formed by silicate–fluoride?+?phosphate (+?S?+?CO₂) melt immiscibility following ascent, cooling, and decompression of what was initially a single homogeneous magma that intruded the granite. The REE distribution coefficients between the silica-rich aplites and REE-rich segregations are in good agreement with experimentally determined distribution coefficients for immiscible silicate–fluoride?+?phosphate melts. Although monazite-(Ce) and uraninite U–Th–Pb microprobe ages for the segregations yield 1.420(±?25) and 1.442(±?8) Ga, respectively, thus suggesting a co-genetic relationship with their host granite, ε_Nd1.42Ga values for the granites and related granitic pegmatites range from ??3.3 to ??4.7 (average ??3.9), and differ from the values for both the aplites and REE-rich segregations, which range from ??1.0 to ??2.2 (average ??1.6). Furthermore, the granites and pegmatites have (La/Yb)_N <50 with significant negative Eu anomalies, which contrast with higher (La/Yb)_N >100 and absence of an Eu anomaly in both the aplites and segregations. These data are consistent with the aplite dikes and the REE-rich segregations they contain being co-genetic, but derived from a source different from that of the granite. The higher ε_Nd1.42Ga values for the aplites and REE-rich segregations suggest that the magma from which they separated had a more mafic and deeper, dryer and hotter source in the lower crust or upper mantle compared to the quartzo-feldspathic upper crustal source proposed for the Longs Peak-St. Vrain granite.     

Multiple timescale constraints for high-flux magma chamber assembly prior to the Late Bronze Age eruption of Santorini (Greece)

The rhyodacitic magma discharged during the 30–80 km³ DRE (dense rock equivalent) Late Bronze Age (LBA; also called ‘Minoan’) eruption of Santorini caldera is known from previous studies to have had a complex history of polybaric ascent and storage prior to eruption. We refine the timescales of these processes by modelling Mg–Fe diffusion profiles in orthopyroxene and clinopyroxene crystals. The data are integrated with previously published information on the LBA eruption (phase equilibria studies, melt inclusion volatile barometry, Mg-in-plagioclase diffusion chronometry), as well as new plagioclase crystal size distributions and the established pre-LBA history of the volcano, to reconstruct the events that led up to the assembly and discharge of the LBA magma chamber. Orthopyroxene, clinopyroxene and plagioclase crystals in the rhyodacite have compositionally distinct rims, overgrowing relict, probably source-derived, more magnesian (or calcic) cores, and record one or more crystallization (plag???opx?>?cpx) events during the few centuries to years prior to eruption. The crystallization event(s) can be explained by the rapid transfer of rhyodacitic melt from a dioritic/gabbroic region of the subcaldera pluton (mostly in the 8–12 km depth range), followed by injection, cooling and mixing in a large melt lens at 4–6 km depth (the pre-eruptive magma chamber). Since crystals from all eruptive phases yield similar timescales, the melt transfer event(s), the last of which took place less than 2 years before the eruption, must have involved most of the magma that subsequently erupted. The data are consistent with a model in which prolonged generation, storage and segregation of silicic melts were followed by gravitational instability in the subcaldera pluton, causing the rapid interconnection and amalgamation of melt-rich domains. The melts then drained to the top of the pluton, at fluxes of up to 0.1–1 km³ year^??1, where steep vertical gradients of density and rheology probably caused them to inject laterally, forming a short-lived holding chamber prior to eruption. This interpretation is consistent with growing evidence that some large silicic magma chambers are transient features on geological timescales. A similar process preceded at least one earlier caldera-forming eruption on Santorini, suggesting that it may be a general feature of this rift-hosted magmatic system.     

Calorimetric determination of the standard enthalpy of formation of stannite,Cu<Subscript>2</Subscript>FeSnS<Subscript>4</Subscript>

The standard enthalpy of formation of stannite (Cu₂FeSnS₄) was calculated from the calorimetric measurements of the reactions of its formation from simple synthetic sulfides: Cu₂S + FeS₂ + SnS → Cu₂FeSnS₄ and ₂CuS + FeS + SnS → Cu₂FeSnS₄. Using published data for the binary sulfides, the standard enthalpy of formation of stannite from the elements was determined as ΔfH°_298.15(Cu₂FeSnS₄) =–(417.28 ± 2.28) kJ mol^–1.     

Calibration of AGRS System Using Transportable Pads in India: An Application to AGRS Data of Aravalli Basin,Banswada Block,South Rajasthan

Calibration of airborne gamma ray spectrometric system (AGRS) over standard radioactive sources of known elemental abundances is essential before carrying out airborne surveys. In India, fixed calibration pads were constructed in 1985. Since then calibration of AGRS system was carried out over the fixed pads. However the fixed pads are expensive to build and maintain. Also the large pads are subject to variations in radiation output due to variable moisture content and radon loss. Alternate approach is to construct transportable calibration pads which are discussed in this paper.Atomic Minerals Directorate for Exploration & Research (AMD) under Department of Atomic Energy has recently constructed five transportable calibration pads. Three pads i.e. K, U and Th have been spiked with the respective radioelements while keeping the minor radioelements to the least in order to obtain pure spectra. A composite pad has been constructed which contains all the three radioelements. This helps in cross verifying the obtained calibration results. A background pad has also been constructed which is helpful to obtain the background values during calibration.Analysis of the data acquired over the transportable pads with airborne gamma ray spectrometer (16.8 ltr) has been carried out and presented in this paper. A comparison with the data acquired over the fixed calibration pads is also included. There is a good agreement of results which suggests the use of transportable pads in future.     

Magnetic Mapping of Banded Iron Formation of Sandur Schist Belt,Dharwar Craton,India

High ground magnetic anomalies are observed at western basin of the Sandur schist belt (SSB) near Muraripura village, Karnataka. Sources for these anomalies are inferred due to presence of exposed banded iron formations hosted by metabasalts, arenaous and argillaceous rocks associated with the Donimali Formation of the schist belt. Two varieties of BIF bands are observed in the study area viz. Band 1 and Band 2. The bands 1 and 2 are displaced by lateral strike-slip fault. Band 1 is dominantly composed of banded iron formation, rich in iron ore minerals and silica chert. Band 2 is largely composed of ferruginous quartzite and quartz arenites. Qualitative analysis of the magnetic data indicates that the study area can be divided into three lithologically important BIF/BQ formations. Spectral and quantitative analysis of the magnetic data indicates, the average depth of band 1 is 70 m and band 2 is 130 m. The magnetic data results are well correlated with chemical analysis of borehole and surface rock samples data.     

Phosphides in Volcanic Seamount Basalts in the Sea of Japan

Electron microprobe data on phosphide grains detected for the first time in basalts from volcanic edifices in the Sea of Japan are presented. The find of phosphides can testify to the endogenic source of phosphorus and, consequently, volcanogenic hydrothermal origin of phosphorites in the Sea of Japan.     

Reliability of reanalyses products in simulating precipitation and temperature characteristics over India

Various reanalyses have been utilized in numerous climate related researches around the globe, however, there exists considerable biasedness in these products, especially in precipitation and temperature data. The ability of these reanalysis products to simulate the precipitation and temperature patterns is observed to be satisfactory at global scale, while it differs significantly at regional scale, especially over regions of high spatio-temporal heterogeneity such as India. Therefore, it is essential to evaluate the applicability and robustness of reanalyses in climate related research. The annual and seasonal variability in spatio-temporal patterns and trends of precipitation and temperature data, with respect to the IMD gridded data over 34 yrs, are evaluated for six global reanalyses namely, NCEP/NCAR Reanalysis (NCEP R1), NCEP-DOE AMIP-2 Reanalysis (NCEP R2), Climate Forecast System Reanalysis (CFSR), ECMWF Interim Reanalysis (ERA-Interim), Modern Era Retrospective Analysis for Research and Application Land only model (MERRA-Land) and JMA 55-year Reanalysis (JRA-55). The ability of the reanalyses was tested based on several factors such as statistical and categorical indices, spells and trends, for annual and seasonal daily values. Several regional and seasonal differences were observed, particularly over high rainfall regions such as Western Ghats and northeastern India. MERRA-Land is found to give the best results for precipitation over India, which is attributed to the updated forcing data using gauge-based precipitation observations. Similarly, ERA-Interim and JRA-55 exhibit better performance for temperature than other datasets. All reanalyses failed to correctly reproduce the trends in IMD data, for both precipitation and temperature. These observations will provide a better perception on the reliability and applicability of reanalyses for climate and hydrological studies over India.