Bioadsorption by sugarcane bagasse for the reduction in oil and grease content in aqueous effluent

Several techniques have been used to reduce the oil and grease content in aqueous streams; one excellent is bioadsorption. With a view to provide a sustainable method for the treatment of oily effluents, the aim of this study was to evaluate sugarcane bagasse as bioadsorbent to reduce the oil and grease content of aqueous effluents. Analysis of the material was performed, and the adsorption experiments were in a batch system, using a synthetic effluent. The results showed that the kinetic equilibrium occurred in 0.08 h of contact. The study of influence of pH of the aqueous phase and the temperature showed that the adsorption capacity was proportional to the pH value, but inversely proportional to the temperature. The adsorption isotherm was obtained at a temperature of 298.15 K using the Langmuir and Langmuir–Freundlich models, and the maximum adsorption capacity obtained was 6.65 kg of hydrocarbon per kg of bioadsorbent. It was verified that sugarcane bagasse represents an excellent material for application in the treatment of oily aqueous effluents, since it is associated with low cost and a high adsorption capacity. The variation in the adsorption capacity observed as a function of pH of the aqueous phase was not found to be significant. This is an important characteristic of the material in terms of its industrial application, verifying the possibility for its implementation in any treatment process, demonstrating the great potential of sugarcane bagasse for use as a sustainable alternative in the reduction in oil and grease in aqueous effluents.     

Assessment of noise exposure and associated health risk in school environment

Noise exposure has become one of the most important factors in determining the quality of life in indoor environments. This paper assesses and analyzes noise exposure levels at school and preschool classrooms with different indoor environments. The sound level [A-weighting equivalent steady sound level L _Aeq (dBA)] was measured using a CEL-63× digital sound level meter. The noise level measurements were performed inside two preschools at three classrooms (an activity room, classroom KG1 and classroom KG2) and three schools at different classrooms, starting from grade 1 to grade 12. The logarithmic average noise levels (L _{Aeq avg}) and the 8-h average noise exposure level (L _{EX, 8-h}) were estimated for each classroom. Furthermore, health risk issues associated with the exposure to high noise levels were investigated using a questionnaire and an interview with more than 250 teachers at the preschools and the schools. Then, the results were analyzed using different statistical tools and were compared with the World Health Organization, Occupational Health and Safety and National Institute for Occupational Safety and Health standards. Also, the results were compared with those from different countries worldwide. The study results show that the 8-h average noise exposure level exceeded the allowable limits in some schools, which indicates that students and teachers can face a serious health effects from noise exposure. The comparisons show that the values of noise levels in Kuwait are higher than those in different countries. The maximum value of noise levels was found in secondary schools. The health problems found during the survey are potentially associated with issues related to hearing, voice, headache and the physiological function of teachers.     

A 3D discrete FEM iterative algorithm for solving the water pipe cooling problems of massive concrete structures

Water pipe cooling has been widely used for the temperature control and crack prevention of massive concrete structures such as high dams. Because both under‐cooling and over‐cooling may reduce the efficiency of crack prevention, or even lead to great harm to structures, we need an accurate and robust numerical tool for the prediction of cooling effect. Here, a 3D discrete FEM Iterative Algorithm is introduced, which can simulate the concrete temperature gradient near the pipes, as well as the water temperature rising along the pipes. On the basis of the heat balance between water and concrete, the whole temperature field of the problem can be computed exactly within a few iteration steps. Providing the pipe meshing tool for building the FE model, this algorithm can take account of the water pipe distribution, the variation of water flow, water temperature, and other factors, while the traditional equivalent algorithm based on semi‐theoretical solutions can only solve problems with constant water flow and water temperature. The validation and convergence are proved by comparing the simulated results and analytical solutions of two standard second‐stage cooling problems. Then, a practical concrete block with different cooling schemes is analyzed and the influences of cooling factors are investigated. In the end, detailed guidance for pipe system optimization is provided. Copyright © 2015 John Wiley & Sons, Ltd.     

Neogene echinoids from the Cayman Islands,West Indies: regional implications

The first fossil echinoids are recorded from the Cayman Islands. A regular echinoid, Arbacia? sp., the spatangoids Brissus sp. cf. B. oblongus Wright and Schizaster sp. cf. S. americanus (Clark), and the clypeasteroid Clypeaster sp. are from the Middle Miocene Cayman Formation. Test fragments of the mellitid clypeasteroid, Leodia sexiesperforata (Leske), are from the Late Pleistocene Ironshore Formation. Miocene echinoids are preserved as (mainly internal) moulds; hence, all species are left in open nomenclature because of uncertainties regarding test architecture. All Miocene taxa are recorded from single specimens apart from the 27 assigned to Brissus. Schizaster sp. cf. S. americanus (Clark) is compared to a species from the Oligocene of the south‐east USA. Brissus sp. cf. B. oblongus is close in gross morphology to a taxon from the Miocene of Malta. Leodia sexiesperforata is identified from fragments with confidence, being the only extant Antillean sand dollar with elongate ambulacral petals that is limited to carbonate substrates. The Miocene echinoids of Grand Cayman, although of limited diversity, are mainly comprised of genera common in comparable mid‐Cenozoic carbonate environments. Copyright © 2015 John Wiley & Sons, Ltd.     

Statistical chemistry of calcic amphiboles

Principal components analysis is used to study the chemistry of 639 calcic amphiboles. Eigenvectors representing multiple partial correlation coefficients give various sets of substitutional relationships. The relative significance of each set can be noted by the percent variation of the data it represents. The highest percent variation (36%) is associated with the substitutions $$Si + Mg \rightleftharpoons Al^{IV} + Al^{VI} + Ti + Fe^{3 + } + Fe^{2 + } + Na + K$$ . Other expected substitutions among the ions such as Al^IV + Na ? Si, the positive correlation between Al^IV and Al^VI etc. are shown statistically. The substitution of Al in T ₁ and T ₂ positions imposes an ordering in the M ₁, M ₂ and M ₃ sites. Variability of OH in the amphiboles is found to be significant. There is no definite correlation between OH and Fe³⁺ but OH and Ti are positively correlated. Under certain conditions and provided the concentration of Al^IV does not change significantly, Fe and Mg may be assumed to mix ideally in the amphibole solid solution.