Variability of the water stock dynamics in karst: insights from surface-to-tunnel geophysics

Hydrogeology Journal - A hydrogeophysical field experiment was conducted on a karst hydrosystem in the south of France to investigate groundwater transfer and storage variability at a scale of a...     

An elastic–viscous–plastic sea ice model formulated on Arakawa B and C grids

The elastic–viscous–plastic (EVP) sea ice rheology has been introduced in the large-scale Louvain-la-Neuve sea-Ice Model, version 2 (LIM2), and its performance has been evaluated. Centred difference versions of the rheology have been implemented on both an Arakawa B grid and a C grid, and their performance have been intercompared in coupled simulations with the Nucleus for European Modelling of the Ocean (NEMO) model. Integrations with both implementations lead to fairly similar results which compare well with observations and with previous LIM simulations. The C grid version, however, offers a number of advantages: (a) easier ice coupling with NEMO, which is itself defined on a C grid; (b) possibility of representing ice transport across one-cell-wide straits and passages; (c) better representation of inertial-plastic compressive waves. For these reasons, we recommend the use of the C grid EVP formulation of the ice dynamics in future LIM applications.     

Mineral grain availability and pupal-case building by lotic caddisflies: Effects on case architecture, stability and building expenses

The retreat-making larvae of many lotic caddisflies build entirely new pupal cases with fine gravel and sand that they collect in the neighbourhood of the building place to fix it with silk to cobbles in swift flow (where finer sediments are generally rare). Previous field observations on Hydropsyche siltalai pupal cases illustrate that natural local resource limitations of the preferred grain fraction (2.5–3.15 mm) produced chained effects across other grain fractions, as the alternative use of more grains in the 1.6–2 mm fraction (an unlimited resource) induced an increased use of more grains in the 0.315–0.5 mm fraction (another unlimited resource). To examine the implications of these observations for H. siltalai, we used (1) mesocosms to created minor deviations in the availability of the natural grain size composition of the building material of pupal cases at otherwise carefully replicated natural stream habitat conditions and (2) recently developed technologies to assess many case characteristics so far ignored in studies of caddisfly cases. When the preferred coarser grains (2.5–3.15 mm) were unavailable, more grains with intermediate size (1.25–2.0 mm) were used (and not other, still available coarse grains) and fewer larvae built cases in groups, thereby not only loosing the benefits (lower costs for grain transport and silk) but also avoiding potential disadvantages associated with grouped cases (more aggressive encounters with conspecifics for rare building material, less flow exposure and thus reduced water renewal in the pupal chamber). Unavailability of 2.5–3.15-mm and 0.315–0.5-mm grains caused a reduction of larvae building in groups, more use of grains with intermediate size, changes of several other grain characteristics (e.g. number, circularity) and considerable investment into silk to maintain the case resistance. Finally, grain availability deviating most from that observed in nature (no grains of 2.5–3.15 mm and 1.6–2.0 mm) caused dramatic responses, as mortality increased so that fewer pupal cases were built, using typically more coarse grains so that many cases had an elevated resistance against crushing forces; in addition, many males had a retarded development, whereas female development was unaffected. Thus, the response of H. siltalai to any of the three types of grain limitations differed, illustrating an immense diversity to respond to grain-size shortage.     

Sampling strategies based on sets of behavioural parameters. Application to a simple pesticide fate model

Sampling strategies are necessary to minimise the cost of data acquisition. We consider the case when several samples must be analysed at the same time, knowing rainfall data, optionally discharge data. We assume also that a rainfall-runoff and pesticide transfer model is available. Three methods are presented based on behavioural sets calculated on prior events, which provide optimal sampling times with respect to different statistical criteria, for a fixed number of samples. A methodology to compare these strategies, adapted to a context of data scarcity is proposed for proper validation. We consider that the combination of a model and a strategy is efficient if it does better than a strategy without a model based on equal volumes. Even with a simple and relatively poor model, it can be concluded that the different strategies are efficient and show similar efficiency in spite of their different levels of conceptual and algorithmic complexity.     

Fate and tidal transport of butyltin and mercury compounds in the waters of the tropical Bach Dang Estuary (Haiphong, Vietnam)

In this work, two field campaigns were performed in July 2008 (wet season) and March 2009 (dry season) to produce original data on the concentration, partition and distribution of mercury and butyltin compounds along the tropical Bach Dang Estuary located in North Vietnam (Haiphong, Red River Delta). The results demonstrate that mercury and butyltin speciation in the surface waters of this type of tropical estuary is greatly affected by the drastic changes in the seasonal conditions. During high river discharge in the wet season, there was a large estuarine input of total Hg and tributyltin, while the longer residence time of the waters during the dry season promotes increasing MMHg formation and TBT degradation. Although most of the Hg and TBT is transported into the estuary from upstream sources, tidal cycle measurements demonstrate that this estuary is a significant source of TBT and MMHg during the wet (～3kgTBT/day) and dry (～3gMMHg/day) seasons.     

Observing water-level variations from space-borne high-resolution Synthetic Aperture Radar (SAR) image correlation

The potential of correlating high-resolution Synthetic Aperture Radar images to estimate local water-level variations is analysed based on observing the motions of floating structures. By computing range and azimuth offsets on a COSMO-SkyMed multi-temporal data-set in an area of the French Atlantic Coast, displacement signatures were detected in several harbours of the region. They can be associated with specific floating structures, whose vertical motion is mostly driven by tides. Although the image resolution is not the best achievable for the COSMO-SkyMed sensor, comparison with ground-based tide information revealed that the obtained space-borne measurements are consistent with the tide gauges to a decimetric accuracy. Even if the requirements for traditional users of tidal data are not met by the current revisit time of the COSMO-SkyMed constellation, the method proposed here provides complementary measures, which are already well aligned to requirements of users concerned with long-term sea-level variation and river or lake water stocks.     

Coupes Sismiques des Structures Superficielles dans les Petites Antilles—II: Martinique

Résumé En 1977, deux profils sismiques ont été réalisés en Martinique, un dans la région volcanique de la Montagne Pelée, l'autre dans la partie est de l'île. Le premier couvrait des distances de 3 à 23 km et le second de 2 à 50 km.Les structures superficielles du volcan sont interprétées par un modèle à trois couches. Sur une couche déjà connue, à 6,1 km/s nous trouvons, avec une épaisseur de 0,4 à 2,6 km, une vitesse de 4,3 km/s. En surface et jusqu'à une profondeur de 0,8 à 1,4 km la vitesse est d'environ 2,7 à 2,9 km/s.Dans la partie est de la Martinique, il existe une vitesse élevée-6,5 km/s—à partir d'une profondeur faible, de l'ordre de 3 km.

---

In 1977, two seismic profiles were carried out in Martinique, one in the area of Montagne Pelée volcano, and the second in the eastern part of the island. The length of the first profile ranges from 3 to 23 km and the second from 2 to 50 km. The interpretation shows that the superficial structures of the volcano may be characterized by a three layer model: in the first layer the compressional velocity is about 2.7 to 2.9 km/s, the thickness varying from 0.8 to 1.4 km. The second layer has a velocity of 4.3 km/s and the thickness goes from 0.4 to 2.6 km. The deeper layer known at Leeward West Indies has a 6.1 km/s velocity.The second profile shows that the eastern part of Martinique is marked by a high velocity of 6.5 km/s, found at a depth of 3 km.

     

A SEM-based method to determine the mineralogical composition and the particle size distribution of suspended sediment

A robust method for characterizing the mineralogy of suspended sediment in continental rivers is introduced. It encompasses 3 steps: the filtration of a few milliliters of water, measurements of X-ray energy dispersive spectra using Scanning Electron Microscopy (SEM), and robust machine learning tools of classification. The method is applied to suspended particles collected from various Amazonian rivers. A total of more than 204,000 particles were analyzed by SEM-EDXS (Energy Dispersive X-ray Spectroscopy), i.e. about 15,700 particles per sampling station, which lead to the identification of 15 distinct groups of mineralogical phases. The size distribution of particles collected on the filters was derived from the SEM micrographs taken in the backscattered electron imaging mode and analyzed with ImageJ freeware. The determination of the main mineralogical groups composing the bulk sediment associated with physical parameters such as particle size distribution or aspect ratio allows a precise characterization of the load of the terrigenous particles in rivers or lakes. In the case of the Amazonian rivers investigated, the results show that the identified mineralogies are consistent with previous studies as well as between the different samples collected. The method enabled the evolution of grain size distribution from fine to coarse material to be described in the water column. Implications about hydrodynamic sorting of mineral particles in the water column are also briefly discussed. The proposed method appears well suited for intensive routine monitoring of suspended sediment in river systems.     

In situ LA-ICP-MS U–Pb titanite dating of Na–Ca metasomatism in orogenic belts: the North Pyrenean example

In the Pyrenees, in association with the rotation of the Iberian plate around Europe during the Mid-Cretaceous, a Na–Ca metasomatism is recognized as a complementary record of the hydrothermal activity that led to Na-metasomatism (albitization) and talc–chlorite mineralization. It affected metasedimentary rocks as well as Hercynian granites. In situ laser ablation ICP-MS U–Pb analyses of titanite grains formed in albitites during metasomatism date the Na–Ca metasomatism between 110 and 92 Ma. The temperature of the Na–Ca metasomatism is estimated to be approximately 550 °C. Both the time constraints and temperature estimates suggest that the Na–Ca metasomatism is related to the low-P high-T North Pyrenean metamorphism.