Installation age of limestone masonry determined from its viscous remagnetization

Many rocks passively acquire some time‐dependent or “viscous” remanent magnetism (VRM) at ambient temperatures, without any extraordinary energetic intervention. This magnetization overprints existing remanent magnetization so that it is effectively a remagnetization subparallel to the contemporary geomagnetic field, averaging the geomagnetic field orientation. Certain limestone masonry remagnetizes viscously over an archaeologically useful interval (100 to 8000 Ka) so that the degree of remagnetization is monotonically (but not linearly) related to the construction age. The laboratory unblocking temperature (T_UB) that removes the viscous magnetization is a simple monotonic measure of relative age. The longer a piece of masonry remained stabilized in a certain orientation, the greater is its viscous remagnetization and the higher is its T_UB. Monuments of known age with a similar limestone source permit us to establish a calibration curve of T UB against historical ages. The resulting calibration curve may then be used to predict the ages of otherwise‐undated masonry. Viscous remanent magnetism dating provides precision of <50a in medieval monuments in England and <150a precision for classical to Neolithic monuments in Cyprus; precision depends on the remagnetization rate of the limestone in question. Our calibration curves, for the Jurassic Oolitic Limestone of England and for the Lefkara‐Pakhna Chalks of Cyprus, allowed us to investigate the authenticity of a medieval English synagogue in Lincoln, England, and of a medieval house in Cyprus. Multiple archaeologic VRMs show that masonry was recycled in historical times. © 2006 Wiley Periodicals, Inc.     

Fluid inclusion studies of the Abawso gold prospect,near the Ashanti Belt,Ghana

The major Ghanaian lode gold deposits are preferentially aligned along the western and eastern contacts of the Kumasi Basin with the Ashanti and Sefwi Belts, respectively. The investigated area of the Abawso small-scale concession, covering the workings of the old Ettadom mine, is situated 3 km west of the lithological contact of the Birimian metavolcanic rocks of the Akropong Belt in the east with the Birimian metasedimentary rocks of the Kumasi Basin in the west. The rocks of the Abawso concession represent a steeply NW-dipping limb of a SE-verging anticline with an axis plunging to the SW. Quartz veining occurs predominantly in the form of en échelon dilatational veins along NNE–SSW-striking shear zones of a few metres width and shows evidence of brittle and ductile deformation. Also stockwork-style quartz veining occurs in the vicinity of the main shaft of the old Ettadom mine. Hydrothermal alteration includes sericitisation, sulphidation and locally carbonatisation. The auriferous quartz veins mainly follow the trend of brittle to ductile deformed quartz veins; however, some occur in stockwork. Fluid inclusion studies reveal a large number of H₂O inclusions along intragranular trails in auriferous quartz vein samples, as well as an overall dominance of H₂O and H₂O-CO₂ inclusions over CO₂ inclusions. Textural observations and physico-chemical fluid inclusion properties indicate post-entrapment modifications for all quartz vein samples due to grain boundary migration recrystallisation. This process is interpreted to be responsible for the generation of the CO₂ inclusions from a H₂O-CO₂ parent fluid. In comparison with mineralisation at the Ashanti and Prestea deposits, which are characterised by CO₂±N₂ inclusions, the observed inclusion assemblage may be due to a shallower crustal level of mineralisation, or different degrees and styles of recrystallisation, or a less pronounced development of laminated quartz veins due to comparably restricted pressure fluctuations. Furthermore, the microthermometric observations allow the reconstruction of a possible retrograde P-T path, depicting near-isothermal decompression in the P-T range of the brittle/ductile transition.Editorial handling: E. Frimmel     

Aragonite and calcite preservation in sediments from Lake Iznik related to bottom lake oxygenation and water column depth

This study examines the forcing mechanisms driving long‐term carbonate accumulation and preservation in lacustrine sediments in Lake Iznik (north‐western Turkey) since the last glacial. Currently, carbonates precipitate during summer from the alkaline water column, and the sediments preserve aragonite and calcite. Based on X‐ray diffraction data, carbonate accumulation has changed significantly and striking reversals in the abundance of the two carbonate polymorphs have occurred on a decadal time scale, during the last 31 ka cal bp . Different lines of evidence, such as grain size, organic matter and redox sensitive elements, indicate that reversals in carbonate polymorph abundance arise due to physical changes in the lacustrine setting, for example, water column depth and lake mixing. The aragonite concentrations are remarkably sensitive to climate, and exhibit millennial‐scale oscillations. Extending observations from modern lakes, the Iznik record shows that the aerobic decomposition of organic matter and sulphate reduction are also substantial factors in carbonate preservation over long time periods. Lower lake levels favour aragonite precipitation from supersaturated waters. Prolonged periods of stratification and, consequently, enhanced sulphate reduction favour aragonite preservation. In contrast, prolonged or repeated exposure of the sediment–water interface to oxygen results in in situ aerobic organic matter decomposition, eventually leading to carbonate dissolution. Notably, the Iznik sediment profile raises the hypothesis that different states of lacustrine mixing lead to selective preservation of different carbonate polymorphs. Thus, a change in the entire lake water chemistry is not strictly necessary to favour the preservation of one polymorph over another. Therefore, this investigation is a novel contribution to the carbon cycle in lacustrine systems.     

Differences in grain growth of calcite: a field-based modeling approach

Normal grain growth of calcite was investigated by combining grain size analysis of calcite across the contact aureole of the Adamello pluton, and grain growth modeling based on a thermal model of the surroundings of the pluton. In an unbiased model system, i.e., location dependent variations in temperature-time path, 2/3 and 1/3 of grain growth occurs during pro- and retrograde metamorphism at all locations, respectively. In contrast to this idealized situation, in the field example three groups can be distinguished, which are characterized by variations in their grain size versus temperature relationships: Group I occurs at low temperatures and the grain size remains constant because nano-scale second phase particles of organic origin inhibit grain growth in the calcite aggregates under these conditions. In the presence of an aqueous fluid, these second phases decay at a temperature of about 350 °C enabling the onset of grain growth in calcite. In the following growth period, fluid-enhanced group II and slower group III growth occurs. For group II a continuous and intense grain size increase with T is typical while the grain growth decreases with T for group III. None of the observed trends correlate with experimentally based grain growth kinetics, probably due to differences between nature and experiment which have not yet been investigated (e.g., porosity, second phases). Therefore, grain growth modeling was used to iteratively improve the correlation between measured and modeled grain sizes by optimizing activation energy (Q), pre-exponential factor (k₀) and grain size exponent (n). For n=2, Q of 350 kJ/mol, k₀ of 1.7×10²¹ mⁿs^–1 and Q of 35 kJ/mol, k₀ of 2.5×10^-5 mⁿs^–1 were obtained for group II and III, respectively. With respect to future work, field-data based grain growth modeling might be a promising tool for investigating the influences of secondary effects like porosity and second phases on grain growth in nature, and to unravel differences between nature and experiment.Editorial responsibility: J. Hoefs     

High resolution regional climate model simulations for Germany: Part II—projected climate changes

The projected climate change signals of a five-member high resolution ensemble, based on two global climate models (GCMs: ECHAM5 and CCCma3) and two regional climate models (RCMs: CLM and WRF) are analysed in this paper (Part II of a two part paper). In Part I the performance of the models for the control period are presented. The RCMs use a two nest procedure over Europe and Germany with a final spatial resolution of 7 km to downscale the GCM simulations for the present (1971–2000) and future A1B scenario (2021–2050) time periods. The ensemble was extended by earlier simulations with the RCM REMO (driven by ECHAM5, two realisations) at a slightly coarser resolution. The climate change signals are evaluated and tested for significance for mean values and the seasonal cycles of temperature and precipitation, as well as for the intensity distribution of precipitation and the numbers of dry days and dry periods. All GCMs project a significant warming over Europe on seasonal and annual scales and the projected warming of the GCMs is retained in both nests of the RCMs, however, with added small variations. The mean warming over Germany of all ensemble members for the fine nest is in the range of 0.8 and 1.3 K with an average of 1.1 K. For mean annual precipitation the climate change signal varies in the range of ?2 to 9 % over Germany within the ensemble. Changes in the number of wet days are projected in the range of ±4 % on the annual scale for the future time period. For the probability distribution of precipitation intensity, a decrease of lower intensities and an increase of moderate and higher intensities is projected by most ensemble members. For the mean values, the results indicate that the projected temperature change signal is caused mainly by the GCM and its initial condition (realisation), with little impact from the RCM. For precipitation, in addition, the RCM affects the climate change signal significantly.     

Boundary-layer structure near the cold front of a marine cyclone during “ERICA”

The boundary layer in the warm sector of a moderately deepening winter cyclone during the Experiment on Rapidly Intensifying Cyclones over the Atlantic (ERICA) is studied near the cold front. Data from the National Center for Atmospheric Research Electra research aircraft are used to examine mean and turbulence quantities. The aircraft data and supplemental data from ships, drifting buoys and moored buoys reveal an equivalent-barotropic pressure field. The area is found to be dominated by gradients in temperature and in turbulent fluxes, with changes occurring over 100 km horizontally being comparable to changes over 350 m vertically. The horizontal components of the gradients are found to be a maximum in a direction perpendicular to the front. Cross-sections perpendicular to the front are used to illustrate boundary-layer structure. Profiles of wind speed, stress, wind direction and stress direction are estimated from an Ekman model that is modified to take into account the equivalent-barotropic pressure field. Comparison of profiles from the model to the aircraft-measured data show reasonable agreement far from the front (100 km) when the model uses a constant eddy viscosity of approximately 6 kg m^–1 s^–1. Near the front there is less agreement with the model. Profiles of turbulent fluxes of momentum, heat and latent heat are divergent, with along-wind momentum flux negative and decreasing upward, cross-wind momentum flux positive and increasing upward, and heat flux and latent heat flux small, positive and decreasing upward. Far from the front, the turbulent kinetic energy budget shows that dissipation balances shear production. However, near-front behavior has an imbalance at low altitude, with shear production appearing as a TKE sink.     

Modeling and Reconstructing the Biotic Energy Flux in the White Sea Ecosystem Based on the Balance Principle

Oceanology - The paper presents a mass-balance model that simulates the biotic energy flux in the White Sea ecosystem. The model is designed to forecast the annual production of autotrophic...     

Biogeographical drivers of ragweed pollen concentrations in Europe

Theoretical and Applied Climatology - The drivers of spatial variation in ragweed pollen concentrations, contributing to severe allergic rhinitis and asthma, are poorly quantified. We analysed the...     

Combination of multi-mission altimetry data along the Mekong River with spatio-temporal kriging

River water-level time series at fixed geographical locations, so-called virtual stations, have been computed from single altimeter crossings for many years. Their temporal resolution is limited by the repeat cycle of the individual altimetry missions. The combination of all altimetry measurements along a river enables computing a water-level time series with improved temporal and spatial resolutions. This study uses the geostatistical method of spatio-temporal ordinary kriging to link multi-mission altimetry data along the Mekong River. The required covariance models reflecting the water flow are estimated based on empirical covariance values between altimetry observations at various locations. In this study, two covariance models are developed and tested in the case of the Mekong River: a stationary and a non-stationary covariance model. The proposed approach predicts water-level time series at different locations along the Mekong River with a temporal resolution of 5 days. Validation is performed against in situ data from four gauging stations, yielding RMS differences between 0.82 and 1.29 m and squared correlation coefficients between 0.89 and 0.94. Both models produce comparable results when used for combining data from Envisat, Jason-1, and SARAL for the time period between 2002 and 2015. The quality of the predicted time series turns out to be robust against a possibly decreasing availability of altimetry mission data. This demonstrates that our method is able to close the data gap between the end of the Envisat and the launch of the SARAL mission with interpolated time series.     

Biological production off Southern California is linked to climatic change

To obtain clues about how coastal primary production might be affected by interannual and interdecadal changes in climate, we studied marine laminated sediments from the center of the Santa Barbara Basin. We report here a large decrease in the flux of diatoms between the periods 1954–1972 and 1973–1986, by a factor of five, and sustained reductions from 1973 to 1978 by a factor of ten below the pre-1972 period. Planktonic foraminifera flux shows a consistent trend of decrease with lowest values from 1981 to 1984. On the whole, the 1954–1972 period is considerably cooler than the 1973–1986 period, over the entire North Pacific. The decrease in biological production in this coastal system is accompanied by an overall intensification of the Aleutian Low in the North Pacific over the past 14 years, providing for a weakening of the California Current, and an overall reduction of mixing and upwelling. The possibility that the low coastal production could provide positive feedback to global warming through reduction of CO₂-uptake, and its relation to the greenhouse effect is considered. On a shorter time-scale, the effects of El Niño phenomena are clearly seen in the sediments of this basin, as decreases in total diatom flux and increases in the relative abundance of certain warm-water diatoms.