An in-depth look at the lunar crater Copernicus: Exposed mineralogy by high-resolution near-infrared spectroscopy

Newly acquired, sequentially spaced, high-resolution near-infrared spectra across the central section of crater Copernicus’ interior have been analyzed using a range of complementary techniques and indexes.We have developed a new interpretative method based on a multiple stage normalization process that appears to both confirm and expand on previous mineralogical estimations and mapping. In broad terms, the interpreted distribution of the principle mafic species suggests an overall composition of surface materials dominated by calcium-poor pyroxenes and minor olivine but with notable exceptions: the southern rim displays strong ca-rich pyroxene absorption features and five other locations, the uppermost northern crater wall, opposite rim sections facing the crater floor, and the central peak Pk1 and at the foot of Pk3, show instead strong olivine signatures.We also propose impact glass an alternative interpretation to the source of the weak but widespread olivine-like spectral signature found in low-reflectance samples, since it probably represents a major regolith constituent and component in large craters such as Copernicus.The high quality and performance of the SIR-2 data allows for the detection of diagnostic key mineral species even when investigating spectral samples with very subdued absorption features, confirming the intrinsic high-quality value of the returned data.     

From regolith to rock by shock

A model for shock-lithification of terrestrial and lunar regolith is proposed that accounts for: (1) observed petrographic properties and densities of shock-lithified material from missile impact craters at White Sands, New Mexico and from Meteor Crater, Arizona; (2) observed petrographic textures of lunar soil and lunar soil analogues experimentally shocked to known pressures in laboratory experiments; (3) theoretical calculations of the behavior of air and water under shock compression; and (4) measured Hugoniot and release adiabat data on dry and wet terrestrial soils and lunar regolith. In this model it is proposed that air or an air-water mixture initially in the pores of terrestrial soil affects the behavior of the soil-air-water system under shock-loading. Shock-lithified rocks found at Meteor Crater are classified as ‘strongly lithified’ and ‘weakly lithified’ on the basis of their strength in hand specimen; only weakly lithified rocks are found at the missile impact craters. These qualitative strength properties are related to the mechanisms of bonding in the rocks. The densities of weakly lithified samples are directly related to the pressures to which they were shock-loaded. A comparison of the petrographic textures and densities of weakly lithified samples with textures and densities of ‘regolith’ shock-loaded to known pressures suggests that weakly lithified terrestrial samples formed at pressures well under 100 kb, probably under 50 kb. If terrestrial soils are shock-loaded to pressures between 100 and 200 kb by impact events of short duration, the pore pressure due to hot air or air-water mixtures exceeds the strength of the weak lithification mechanisms and fragmentation, rather than lithification, occurs. At pressures above 200 kb, lithification can occur because the formation of glass provides a lithification mechanism which has sufficient strength to withstand the pore pressure. During shock-lithification of lunar regolith at pressures below 50 kb, the material is compressed to intrinsic crystal density and remains at approximately that density upon release from the shocked state. It is proposed, however, that at pressures in excess of 50 kb, the release of trapped volatiles from lunar soil grains into fractures causes an expansion of the regolith during unloading from the shocked state.     

Antarctic Dry Valleys and indigenous weathering in Mars meteorites: Implications for water and life on Mars

The Dry Valleys of Antarctica are an excellent analog of the environment at the surface of Mars. Soil formation histories involving slow processes of sublimation and migration of water-soluble ions in polar desert environments are characteristic of both Mars and the Dry Valleys. At the present time, the environment in the Dry Valleys is probably the most similar to that in the mid-latitudes on Mars although similar conditions may be found in areas of the polar regions during their respective Mars summers. It is thought that Mars is currently in an interglacial period, and that subsurface water ice is sublimating poleward. Because the Mars sublimation zones seem to be the most similar to the Antarctic Dry Valleys, the Dry Valleys-type Mars climate is migrating towards the poles. Mars has likely undergone drastic obliquity changes, which means that the Dry Valleys analog to Mars may be valid for large parts of Mars, including the polar regions, at different times in geologic history. Dry Valleys soils contain traces of silicate alteration products and secondary salts much like those found in Mars meteorites. A martian origin for some of the meteorite secondary phases has been verified previously; it can be based on the presence of shock effects and other features which could not have formed after the rocks were ejected from Mars, or demonstrable modification of a feature by the passage of the meteorite through Earth's atmosphere (proving the feature to be pre-terrestrial). The martian weathering products provide critical information for deciphering the near-surface history of Mars. Definite martian secondary phases include Ca-carbonate, Ca-sulfate, and Mg-sulfate. These salts are also found in soils from the Dry Valleys of Antarctica. Results of earlier Wright Valley work are consistent with what is now known about Mars based on meteorite and orbital data. Results from recent and current Mars missions support this inference. Aqueous processes are active even in permanently frozen Antarctic Dry Valleys soils, and similar processes are probably also occurring on Mars today, especially at the mid-latitudes. Both weathering products and life in Dry Valleys soils are distributed heterogeneously. Such variations should be taken into account in future studies of martian soils and also in the search for possible life on Mars.     

The role of granites in volcanic-hosted massive sulphide ore-forming systems: an assessment of magmatic�Chydrothermal contributions

Assessment of geological, geochemical and isotopic data indicates that a significant subgroup of volcanic-hosted massive sulphide (VHMS) deposits has a major or dominant magmatic?Chydrothermal source of ore fluids and metals. This group, which is typically characterised by high Cu and Au grades, includes deposits such as those in the Neoarchean Doyon-Bousquet-LaRonde and Cambrian Mount Lyell districts. These deposits are distinguished by aluminous advanced argillic alteration assemblages or metamorphosed equivalents intimately associated with ore zones. In many of these deposits, ??³⁴S_sulphide is low, with a major population below ?3??; ??³⁴S_sulphate differs from coexisting seawater and ??³⁴S_{sulphate?Csulphide}????20?C30??. These characteristics are interpreted as the consequence of disproportionation of magmatic SO₂ as magmatic?Chydrothermal fluids ascended and cooled and as a definitive evidence for a significant magmatic?Chydrothermal contribution. Other characteristics that we consider diagnostic of significant magmatic?Chydrothermal input into VHMS ore fluids include uniformly high (>3 times modern seawater values) salinities or very ¹⁸O-enriched (??¹⁸O?>?5??) ore fluids. We do not consider other criteria [e.g. variable salinity, moderately high ??¹⁸O_fluid (2?C5??), ??³⁴S_sulphide near 0??, metal assemblages or a spatial association with porphyry Cu or other clearly magmatic-hydrothermal deposits] that have been used previously to advocate significant magmatic?Chydrothermal contributions to be diagnostic as they can be produced by non-magmatic processes known to occur in VHMS mineral systems. However, in general, a small magmatic?Chydrothermal contribution cannot be excluded in most VHMS systems considered. Conclusive data that imply minimal magmatic?Chydrothermal contributions are only available in the Paleoarchean Panorama district where coeval seawater-dominated and magmatic?Chydrothermal systems appear to have been physically separated. This district, which is characterised by chloritic and sericitic alteration assemblages and lacks aluminous advanced argillic alteration assemblages, is typical of many VHMS deposits around the world, suggesting that for ??garden variety?? VHMS deposits, a significant magmatic?Chydrothermal contribution is not required. Other than deposits associated with advanced argillic alteration assemblages, the only deposit for which we ascribe a major magmatic?Chydrothermal contribution is the Devonian Neves Corvo deposit. This deposit differs from other deposits in the Iberian Pyrite Belt and around the world in being extremely Sn-rich, with the Sn closely associated with Cu and in having formed from high ¹⁸O-rich fluids (??¹⁸O_fluid ??8.5??). We consider these characteristics, particularly the last, as diagnostic of a significant magmatic hydrothermal contribution. Our analysis indicates that two subgroups of VHMS deposits have a major magmatic?Chydrothermal contribution: Cu/Au-rich deposits with aluminous alteration assemblages and reduced, very Sn-rich deposits in which Sn was introduced in a high-temperature ore assemblage. Comparison with ??normal?? VHMS deposits suggests that these subgroups of VHMS deposits may form in specialised tectonic environments. The Cu/Au-rich deposits appear to form adjacent to magmatic arcs, an environment conducive to the generation of hydrous, oxidised melts by melting metasomatised mantle in the wedge above the subducting slab. This contrasts with the back-arc setting of ??normal?? VHMS deposits in which relatively dry granites (In this contribution, we use the term granite sensu latto) formed by decompression melting drive seawater-dominated hydrothermal circulation. The tectonic setting of highly Sn-rich VHMS deposits such as Neves Corvo is less clear; however, thick continental crust below the ore-hosting basin may be critical, as it is in other Sn deposits.     

Surface evolution of dissolving minerals investigated with a kinetic Ising model

In natural weathering systems, both the chemistry and the topography of mineral surfaces change as rocks and minerals equilibrate to surface conditions. Most geochemical research has focused on changes in solution chemistry over time; however, temporal changes in surface topography may also yield information about rates and mechanisms of dissolution. We use stochastic dissolution simulations of a regular 2-D lattice with reaction mechanisms defined in terms of nearest neighbor interactions to elucidate how the surface area and reactivity of a crystal evolve during dissolution. Despite the simplicity of the model, it reproduces key features observed or inferred for mineral dissolution. Our model results indicate that: (i) dissolving surfaces reach a steady-state conformation after sufficient dissolution time, (ii) linear defects cause surface area and dissolution rate to vary in concert with one another, (iii) sigmoidal and non-sigmoidal rate vs. free-energy of reaction (ΔG_rxn) behavior can be rationalized in terms of the multiple steps occurring during dissolution, and (iv) surface roughness as a function of ΔG_rxn is highly sensitive to the reaction mechanism. When simulated times to reach steady-state are compared to published time series rate data using suitable scaling, good agreement is found for silicate minerals while the model significantly over-predicts the duration of the transient for Fe and Al oxides. The implication of our simple model is that many aspects of mineral dissolution behavior, including approach to steady-state, sigmoidal vs. non-sigmoidal rate vs. ΔG_rxn behavior, and development of rougher surfaces in conditions further from equilibrium can be explained by nearest neighbor interactions and simple Kossel-type models where reactivity of a surface is defined in terms of perfect surface, step, and kink sites.     

Quick-look assessments to identify optimal CO2 EOR storage sites

A newly developed, multistage quick-look methodology allows for the efficient screening of an unmanageably large number of reservoirs to generate a workable set of sites that closely match the requirements for optimal CO₂ enhanced oil recovery (EOR) storage. The objective of the study is to quickly identify miscible CO₂ EOR candidates in areas that contain thousands of reservoirs and to estimate additional oil recovery and sequestration capacities of selected top options through dimensionless modeling and reservoir characterization. Quick-look assessments indicate that the CO₂ EOR resource potential along the US Gulf Coast is 4.7 billion barrels, and CO₂ sequestration capacity is 2.6 billion metric tons. In the first stage, oil reservoirs are screened and ranked in terms of technical and practical feasibility for miscible CO₂ EOR. The second stage provides quick estimates of CO₂ EOR potential and sequestration capacities. In the third stage, a dimensionless group model is applied to a selected set of sites to improve the estimates of oil recovery and storage potential using appropriate inputs for rock and fluid properties, disregarding reservoir architecture and sweep design. The fourth stage validates and refines the results by simulating flow in a model that describes the internal architecture and fluid distribution in the reservoir. The stated approach both saves time and allows more resources to be applied to the best candidate sites.     

The Oeschinensee rock avalanche,Bernese Alps,Switzerland: a co-seismic failure 2300 years ago?

Landslide deposits dam Lake Oeschinen (Oeschinensee), located above Kandersteg, Switzerland. However, past confusion differentiating deposits of multiple landslide events has confounded efforts to quantify the volume, age, and failure dynamics of the Oeschinensee rock avalanche. Here we combine field and remote mapping, topographic reconstruction, cosmogenic surface exposure dating, and numerical runout modeling to quantify salient parameters of the event. Differences in boulder lithology and deposit morphology reveal that the landslide body damming Oeschinensee consists of debris from both an older rock avalanche, possibly Kandertal, as well as the Oeschinensee rock avalanche. We distinguish a source volume for the Oeschinensee event of 37 Mm³, resulting in an estimated deposit volume of 46 Mm³, smaller than previous estimates that included portions of the Kandertal mass. Runout modeling revealed peak and average rock avalanche velocities of 65 and 45 m/s, respectively, and support a single-event failure scenario. ³⁶Cl surface exposure dating of deposited boulders indicates a mean age for the rock avalanche of 2.3 ± 0.2 kyr. This age coincides with the timing of a paleo-seismic event identified from lacustrine sediments in Swiss lakes, suggesting an earthquake trigger. Our results help clarify the hazard and geomorphic effects of rare, large rock avalanches in alpine settings.     

User participation and fishery management performance within the pacific fishery management council

Fish populations have the potential to contribute to the long-term economic and social benefit of humans, but to do so they must be managed in ways which maintain ecological health. There are many ways that management performance can be assessed, but four measures are particularly pertinent to sustainability: equity, stewardship, regulatory resilience, and efficiency. A key factor in management performance is the process by which management tools are developed and implemented. One approach that has been recommended to improve performance is to structure the management process around user participation. The paper analyzes three case studies of user participation in ad hoc processes of Pacific groundfish management: the development of a license limitation program; an inter-gear sablefish allocation; and the development of a sablefish individual quota (IQ) program. The case studies illustrate the role played by participation in contributing to the equity, stewardship, resilience, and efficiency of the management process. The effect of user participation was mixed in the three cases, depending on the history of participation, the structure and process of participation, on resource conditions and on the characteristics of the program under consideration. Participation can contribute positively to fishery management performance when there is a history of collective decision-making, the time line is slow enough to allow a full consideration of the issues, educational possibilities are pursued and the condition of the resource allows equitable compromises.     

How U.S. ocean policy and market power can reform the coral reef wildlife trade

As the world’s largest importer of marine ornamental species for the aquaria, curio, home décor, and jewelry industries, the United States has an opportunity to leverage its considerable market power to promote more sustainable trade and reduce the effects of ornamental trade stress on coral reefs worldwide. Evidence indicates that collection of some coral reef animals for these trades has caused virtual elimination of local populations, major changes in age structure, and promotion of collection practices that destroy reef habitats. Management and enforcement of collection activities in major source countries such as Indonesia and the Philippines remain weak. Strengthening US trade laws and enforcement capabilities combined with increasing consumer and industry demand for responsible conservation can create strong incentives for improving management in source countries. This is particularly important in light of the March 2010 failure of the parties to the Convention on International Trade in Endangered Species (CITES) to take action on key groups of corals.     

BIFoR FACE: Water–soil–vegetation–atmosphere data from a temperate deciduous forest catchment,including under elevated CO2

The ecosystem services provided by forests modulate runoff generation processes, nutrient cycling and water and energy exchange between soils, vegetation and atmosphere. Increasing atmospheric CO₂ affects many linked aspects of forest and catchment function in ways we do not adequately understand. Global levels of atmospheric CO₂ will be around 40% higher in 2050 than current levels, yet estimates of how water and solute fluxes in forested catchments will respond to increased CO₂ are highly uncertain. The Free Air CO₂ Enrichment (FACE) facility of the University of Birmingham's Institute of Forest Research (BIFoR) is the only FACE in mature deciduous forest. The site specializes in fundamental studies of the response of whole ecosystem patches of mature, deciduous, temperate woodland to elevated CO₂ (eCO₂). Here, we describe a dataset of hydrological parameters – seven weather parameters at each of three heights and four locations, shallow soil moisture and temperature, stream hydrology and CO₂ enrichment – retrieved at high frequency from the BIFoR FACE catchment.