Compositional variability and air-sea flux of ethane and propane in the plume of a large, marine seep field near Coal Oil Point, CA

Large quantities of methane (C1), ethane (C2), and propane (C3) emanate from shallow marine seeps near Coal Oil Point (COP), California. Concentrations of these gases were analyzed in the surface water down-current of the seep field over a 15-month period. The variable proportions of C1, C2, and C3 analyzed in gas bubbles emitted from 16 distinct seeps in the COP field encompass much of the variability found in the surface waters down-current. However, waters with disproportionate levels of C1 suggest the presence of additional C1 sources. Based on three spatial surveys, covering areas up to 280 km², C2 and C3 air-sea fluxes were estimated to be in the order of 3.7 and 1.4 μmol day^?1 m^?2, respectively. Only 0.6% of C2 and 0.5% of C3 in the dissolved plume originating from the COP seep field are transferred to the atmosphere in the study area, with the fate of the remainder uncertain.     

Weathering and erosion of fractured bedrock systems

We explore the contribution of fractures (joints) in controlling the rate of weathering advance for a low‐porosity rock by using methods of homogenization to create averaged weathering equations. The rate of advance of the weathering front can be expressed as the same rate observed in non‐fractured media (or in an individual block) divided by the volume fraction of non‐fractured blocks in the fractured parent material. In the model, the parent has fractures that are filled with a more porous material that contains only inert or completely weathered material. The low‐porosity rock weathers by reaction‐transport processes. As observed in field systems, the model shows that the weathering advance rate is greater for the fractured as compared to the analogous non‐fractured system because the volume fraction of blocks is < 1. The increase in advance rate is attributed both to the increase in weathered material that accompanies higher fracture density, and to the increase in exposure of surface of low‐porosity rock to reaction‐transport. For constant fracture aperture, the weathering advance rate increases when the fracture spacing decreases. Equations describing weathering advance rate are summarized in the ‘List of selected equations’. If erosion is imposed at a constant rate, the weathering systems with fracture‐bounded bedrock blocks attain a steady state. In the erosional transport‐limited regime, bedrock blocks no longer emerge at the air‐regolith boundary because they weather away. In the weathering‐limited (or kinetic) regime, blocks of various size become exhumed at the surface and the average size of these exposed blocks increases with the erosion rate. For convex hillslopes, the block size exposed at the surface increases downslope. This model can explain observations of exhumed rocks weathering in the Luquillo mountains of Puerto Rico. Published 2017. This article is a U.S. Government work and is in the public domain in the USA     

Detecting,sourcing, and age-dating dredged sediments on the open shelf,southern California,using dead mollusk shells

Molluscan shell debris is an under-exploited means of detecting, sourcing, and age-dating dredged sediments in open-shelf settings. Backscatter features on the Southern California shelf are suggestive of dredged sediment hauled from San Diego Bay but deposited significantly inshore of the EPA-designated ocean disposal site. We find that 36% of all identifiable bivalve shells > 2 mm (44% of shells > 4 mm) in sediment samples from this 'short dump' area are from species known to live exclusively in the Bay; such shells are absent at reference sites of comparable water depth, indicating that their presence in the short-dump area signals non-compliant disposal rather than natural offshore transport or sea level rise. These sediments lack the shells of species that invaded California bays in the 1970s, suggesting that disposal preceded federal regulations. This inexpensive, low-tech method, with its protocol for rejecting alternative hypotheses, will be easy to adapt in other settings.     

Exploring an ‘ideal hill': how lithology and transport mechanisms affect the possibility of a steady state during weathering and erosion

We present a model of chemical reaction within hills to explore how evolving porosity (and by inference, permeability) affects flow pathways and weathering. The model consists of hydrologic and reactive-transport equations that describe alteration of ferrous minerals and feldspar. These reactions were chosen because previous work emphasized that oxygen- and acid-driven weathering affects porosity differently in felsic and mafic rocks. A parameter controlling the order of the fronts is presented. In the absence of erosion, the two reaction fronts move at different velocities and the relative depths depend on geochemical conditions and starting composition. In turn, the fronts and associated changes in porosity drastically affect both the vertical and lateral velocities of water flow. For these cases, estimates of weathering advance rates based on simple models that posit unidirectional constant-velocity advection do not apply. In the model hills, weathering advance rates diminish with time as the Darcy velocities decrease with depth. The system can thus attain a dynamical steady state at any erosion rate where the regolith thickness is constant in time and velocities of both fronts become equal to one another and to the erosion rate. The slower the advection velocities in a system, the faster it attains a steady state. For example, a massive rock with relatively fast-dissolving minerals such as diabase – where solute transport across the reaction front mainly occurs by diffusion – can reach a steady state more quickly than granitoid rocks in which advection contributes to solute transport. The attainment of a steady state is controlled by coupling between weathering and hydrologic processes that force water to flow horizontally above reaction fronts where permeability changes rapidly with depth and acts as a partial barrier to fluid flow. Published 2020. This article is a U.S. Government work and is in the public domain in the USA.     

The Geochemical Effects of Microbial Humic Substances Reduction

As part of a study on microbial redox alteration of humic substances we investigated the potential effect of this metabolism on the fate of heavy metals and hydrocarbons as a result of conformational alteration of the humic molecular structure due to microbial reduction. Our studies indicate that the microbial reduction of humic acids (HA) results in significant morphological and geochemical alterations. X‐ray microscopy analysis indicate that the conformational structure of the humic colloids is altered as a result of the redox change. In the reduced state, the HA appeared as small dense particles, on reoxidation, large loose aggregates were formed. In addition, spectrofluorometric studies indicated that the binding capacity of the HA for naphthalene was decreased by 10% when the HA was reduced. Similarly, the reduced HA yielded higher surface tension values at all concentrations tested which is indicative of a more hydrophilic and less hydrophobic solute. On reoxidation, the surface tension values reverted back to values similar to those obtained for the untreated oxidized HA. These data indicate that the hydrophobicity of the HA is altered on biological reduction of the HA and that this alteration is reversible. In contrast the reduced HA demonstrated a 15% higher affinity for heavy metals such as divalent cobalt than the oxidized HA. In addition to increasing the binding capacity of HA for heavy metals, the reduction of the HA also decreased the bioavailability and toxicity of bound heavy metals such as chromium. When incubated in the presence of Cr(III) and HA, cells of Escherichia coli grew much more rapidly in the presence of the reduced HA suggesting that the higher metal binding capacity of the reduced humic substances resulted in a removal of the Cr(III) from solution and hence reduced its bioavailability and toxicity. These studies demonstrate that HA redox state and reduction of humic acids by microorganisms can have a significant effect on the molecular morphology and binding constants of HA for heavy metals and hydrocarbons and also directly affects the bioavailability of these compounds in the environment.     

利用志愿观测船提升表层海洋观测能力

对表层海洋动力学及其调控机制的认识对准确认识海洋自然变化过程及其未来对气候变化的响应具有重要意义。志愿观测船作为自动观测系统的载体和样品采集平台的优势使其在提升人类对于表层海洋的观测能力方面具有极大优势。本文系统性地回顾了志愿观测船的概念、发展历史、现状和未来发展趋势。基于志愿观测船的诸多海洋观测项目的成功显示了,随着快速发展的传感器技术,志愿观测船能够以经济有效的方式显著地提升表层海洋现场观测的时间和空间分辨率。未来的海洋观测系统应该综合利用包括志愿观测船在内的多种海洋观测平台的优势。     

Using Audience Physiology to Assess Engaging Conservation Messages and Animal Taxa

Abstract

We used heart rate change as a tool to study how positive and negative wildlife conservation messaging impacts a viewer, and which types of animal images stimulate greatest reaction. We used scenes from five wildlife conservation videos available from environmental organization websites and YouTube, with positive and negative messaging. We found both very positive and very negative messaging in videos may be similarly effective in engaging viewers. A trend in greater changes in heart rate when insects, mammals, and birds appear on the screen suggests generally high human interest in these taxa, potentially due to avoidance and attraction responses. The number of scenes (N?=?54) in which various taxa appear reflects bias toward mammals (65%) and birds (17%) to capture viewers’ attention. Arousal is a primary step in engaging an audience to attend to a message. Physiological research offers innovative new techniques to evaluate public responses to communications about biodiversity conservation.