High-resolution seafloor mapping using the DSL-120 sonar system: Quantitative assessment of sidescan and phase-bathymetry data from the Lucky Strike segment of the Mid-Atlantic Ridge

High-resolution, side-looking sonar data collected near the seafloor (100 m altitude) provide important structural and topographic information for defining the geological history and current tectonic framework of seafloor terrains. DSL-120 kHz sonar data collected in the rift valley of the Lucky Strike segment of the Mid-Atlantic Ridge near 37° N provide the ability to quantitatively assess the effective resolution limits of both the sidescan imagery and the computed phase-bathymetry of this sonar system. While the theoretical, vertical and horizontal pixel resolutions of the DSL-120 system are <1 m, statistical analysis of DSL-120 sonar data collected from the Lucky Strike segment indicates that the effective spatial resolution of features is 1–2 m for sidescan imagery and 4 m for phase-bathymetry in the seafloor terrain of the Mid-Atlantic Ridge rift valley. Comparison of multibeam bathymetry data collected at the sea-surface with deep-tow DSL-120 bathymetry indicates that depth differences are on the order of the resolution of the multibeam system (10–30 m). Much of this residual can be accounted for by navigational mismatches and the higher resolving ability of the DSL-120 data, which has a bathymetric footprint on the seafloor that is 20 times smaller than that of hull-mounted multibeam at these seafloor depths (2000 m). Comparison of DSL-120 bathymetry with itself on crossing lines indicates that residual depth values are ±20 m, with much of that variation being accounted for by navigational errors. A DSL-120 survey conducted in 1998 on the Juan de Fuca Ridge with better navigation and less complex seafloor terrain had residual depth values half those of the Lucky Strike survey. The quality of the bathymetry data varies as a function of position within the swath, with poorer data directly beneath the tow vehicle and also towards the swath edges.Variations in sidescan amplitude observed across the rift valley and on Lucky Strike Seamount correlate well with changes in seafloor roughness caused by transitions from sedimented seafloor to bare rock outcrops. Distinct changes in sonar backscatter amplitude were also observed between areas covered with hydrothermal pavement that grade into lava flows and the collapsed surface of the lava lake in the summit depression of Lucky Strike Seamount. Small features on the seafloor, including volcanic constructional features (e.g., small cones, haystacks, fissures and collapse features) and hydrothermal vent chimneys or mounds taller than 2 m and greater than 9 m² in surface area, can easily be resolved and mapped using this system. These features at Lucky Strike have been confirmed visually using the submersible Alvin, the remotely operated vehicle Jason, and the towed optical/acoustic mapping system Argo II.     

Spatial Variation in the Structure of Kelp Forest Communities Along a Wave Exposure Gradient

Abstract. Four sites were sampled in kelp (Macrocysiis pyrifera) forests occupying rocky bottom habitats along a wave exposure gradient in central California. Consistent betwecn-site differences were found in the three major structural elements - the surface canopy, the undcrstory assemblage, and the ground cover/turf assemblage - of kelp forest communities. Macrocysiis pyrifera was found at all four sites. Nereucyslis tuelkeana only at the most exposed site. The understory kelps Laminaria setchellii and Pterygopltora californica were also characteristic of exposed sites. Articulated coralline algae were more abundant at exposed sites than protected, while fleshy red algae showed the opposite pattern. All four study sites were located along 8.5 km of coastline, and thus were assumed to have available to them the same species pool for colonization. The substrate composition was the same and the amount of unconsolidated substrate was similar at all four sites. We suggest that exposure to wave-generated water motion, through its influence on the surface canopy and therefore on the amount of light reaching the bottom, is responsible for these between-site differences.     

User participation and fishery management performance within the pacific fishery management council

Fish populations have the potential to contribute to the long-term economic and social benefit of humans, but to do so they must be managed in ways which maintain ecological health. There are many ways that management performance can be assessed, but four measures are particularly pertinent to sustainability: equity, stewardship, regulatory resilience, and efficiency. A key factor in management performance is the process by which management tools are developed and implemented. One approach that has been recommended to improve performance is to structure the management process around user participation. The paper analyzes three case studies of user participation in ad hoc processes of Pacific groundfish management: the development of a license limitation program; an inter-gear sablefish allocation; and the development of a sablefish individual quota (IQ) program. The case studies illustrate the role played by participation in contributing to the equity, stewardship, resilience, and efficiency of the management process. The effect of user participation was mixed in the three cases, depending on the history of participation, the structure and process of participation, on resource conditions and on the characteristics of the program under consideration. Participation can contribute positively to fishery management performance when there is a history of collective decision-making, the time line is slow enough to allow a full consideration of the issues, educational possibilities are pursued and the condition of the resource allows equitable compromises.     

Light Requirements for Growth and Survival of Eelgrass (<Emphasis Type="Italic">Zostera marina</Emphasis> L.) in Pacific Northwest (USA) Estuaries

We developed light requirements for eelgrass in the Pacific Northwest, USA, to evaluate the effects of short- and long-term reductions in irradiance reaching eelgrass, especially related to turbidity and overwater structures. Photosynthesis-irradiance experiments and depth distribution field studies indicated that eelgrass productivity was maximum at a photosynthetic photon flux density (PPFD) of about 350–550 μmol quanta m⁻² s⁻¹. Winter plants had approximately threefold greater net apparent primary productivity rate at the same irradiance as summer plants. Growth studies using artificial shading as well as field monitoring of light and eelgrass growth indicated that long-term survival required at least 3 mol quanta m⁻² day⁻¹ on average during spring and summer (i.e., May-September), and that growth was saturated above about 7 mol quanta m⁻² day⁻¹. We conclude that non-light-limited growth of eelgrass in the Pacific Northwest requires an average of at least 7 mol quanta m⁻² day⁻¹ during spring and summer and that long-term survival requires a minimum average of 3 mol quanta m⁻² day⁻¹.     

Diffusion induced Li isotopic fractionation during the cooling of magmatic rocks: The case of pyroxene phenocrysts from nakhlite meteorites

Ion-microprobe was used to measure Li abundances and isotopic compositions in pyroxenes from three Martian meteorites belonging to the nakhlite family. The profiles performed across augite crystals from Northwest Africa 817 show a large isotopic zoning from crystal cores (δ⁷Li ∼ 0‰) to rims (δ⁷Li ∼ +20‰) while Li abundances are almost constant (∼9.2 μg/g). Unlike NWA 817, the pyroxene studied in the Miller Range 03346 nakhlite shows a zoning in Li abundance, with concentrations increasing from ∼2.5 μg/g in the core to ∼9 μg/g in the rim. The augite rim (δ⁷Li = +7‰) is slightly enriched in ⁷Li with regard to the core (δ⁷Li = +4‰), but most of the isotopic variations observed occur at an intermediate position along the profile, where δ⁷Li falls down to ∼−11‰. In the case of Nakhla, Li concentrations in augite increase from cores (∼3.5 μg/g) to rims (∼6.5 μg/g), while the δ⁷Li variation is restricted (i.e., between δ⁷Li = +6.0 and +12.6‰). For the three meteorites the Li abundances were also measured in the groundmass, which was found to be enriched in lithium (∼10 μg/g). Conventional magmatic and post-magmatic processes such as alteration and fractional crystallization, fail to explain the dataset obtained on nakhlites. Degassing processes, which were previously proposed to explain the Li distribution in shergottite crystals, cannot result in the strong decoupling between Li abundances and isotopic composition observed in nakhlites. We suggest that the original magmatic Li distributions (concentrations and isotopic compositions) in nakhlites have been modified by diffusion of Li from the Li-rich groundmass towards the pyroxene crystals during sub-solidus cooling. Diffusion appears to have been efficient for NWA 817 and MIL 03346 but, apparently, did not produce a significant migration of Li in Nakhla, possibly because of the lower abundance of groundmass in the latter. Diffusion induced Li redistributions may also affect terrestrial porphyric rocks but very specific cooling rates are required to quench the diffusion profiles as observed in two of the present nakhlites.     

High rate anaerobic treatment of Sago wastewater using HUASB with PUF as carrier

Sago industry is one of the major small-scale sectors in India and over 800 units are located in the southern State of Tamilnadu. Processing of sago generates enormous quantities of high strength wastewater requiring systematic treatment prior to disposal. The present study is an attempt to treat the sago wastewater using Hybrid Upflow Anaerobic Sludge Blanket (HUASB) reactor, which offers the advantages of both fixed film and up flow anaerobic sludge blanket treatment. HUASB reactor with a volume of 5.6 L was operated at Organic Loading Rates varying from 10.7 to 24.7 kg COD/m³.day. After 130 days of startup, the reactor produced appreciable decrease in COD of wastewater and removed solids efficiently. The COD removal varied from 91–87%. While the removal of Total Solids was in the range of 61–57%, that of volatile solids varied from 70–67%. The ideal OLR for the reactor was 23.5 kg COD/m³.day. The findings of the study open up newer possibilities of design low cost and compact onsite treatment systems with very short retention periods.