Performance-based concept on seismic evaluation of existing bridges

Conventional seismic evaluation of existing bridges explores the ability of a bridge to survive under significant earthquake excitations. This approach has several major drawbacks, such as only a single structural performance of near collapse is considered, and the simplified approach of adopting strength-based concept to indirectly estimate the nonlinear behavior of a structure lacks accuracy. As a result, performance-based concepts that include a wider variety of structural performance states of a given bridge excited by different levels of earthquake intensity is needed by the engineering community. This paper introduces an improved process for the seismic evaluation of existing bridges. The relationship between the overall structural performance and earthquakes with varying levels of peak ground acceleration (PGA) can successfully be linked. A universal perspective on the seismic evaluation of bridges over their entire life-cycle can be easily obtained to investigate multiple performance objectives. The accuracy of the proposed method, based on pushover analysis, is proven in a case study that compares the results from the proposed procedure with additional nonlinear time history analyses.     

Comparison of sedimentation-compression curves obtained by nuclear and gravimetric methods for Wilkinson Basin,Gulf of Maine,sediments

Accurate measurements of bulk density are important in the construction of sedimentation-compression curves of water-saturated, fine-grained cohesive sediments for consolidation studies. The bulk density of five cores was measured nondestructively on a laboratory nuclear transmission densitometer and the water content, expressed as void ratio, was derived from an empirical relationship between bulk density and water content. Bulk density and water content measured destructively was determined every 10 cm for a comparison with the nuclear data. Agreement between nuclear and gravimetric methods was within ± 0.02 g/cm³ for bulk density ranging from 1.2 to 1.4 g/cm³. Sedimentation-compression curves made using both methods were in generally good agreement.In the Wilkinson Basin, void ratio gradually decreases with increasing effective overburden pressure. This indicates that consolidation by dewatering the surficial sediments is normal and that the environmental conditions during deposition remained relatively constant.     

Nature of polymerization and properties of silicate melts and glasses at high pressure

The structures of sodium silicate and aluminosilicate glasses quenched from melts at high pressure (6-10 GPa) with varying degrees of polymerization (fractions of nonbridging oxygen) were explored using solid-state NMR [¹⁷O and ²⁷Al triple-quantum magic-angle spinning (3QMAS) NMR]. The bond connectivity in melts among four and highly coordinated network polyhedra, such as ^[4]Al, ^[5,6]Al, ^[4]Si, and ^[5,6]Si, at high pressure is shown to be significantly different from that at ambient pressure. In particular, in the silicate and aluminosilicate melts, the proportion of nonbridging oxygen (NBO) generally decreases with increasing pressure, leading to the formation of new oxygen clusters that include 5- and 6-coordinated Si and Al in addition to 4-coordinated Al and Si, such as ^[4]Si-O-^[5,6]Si, ^[4]Si-O-^[5,6]Al and Na-O-^[5,6]Si. While the fractions of ^[5,6]Al increase with pressure, the magnitude of this increase diminishes with increasing degrees of ambient-pressure polymerization under isobaric conditions. Incorporating the above structural information into models of melt properties reproduces the anomalous pressure-dependence of O²⁻ diffusivity and viscosity often observed in silicate melts.     

Geochemical survey of rare earth elements (REEs) in the concealed ore body of Hongcheon,Korea

Because of the risk of diminishing supplies of rare earth elements (REEs) worldwide due to China’s dominance over REE supply, the necessity of developing domestic resources of REE has been realized in other countries. To explore new ore bodies, a geochemical survey was conducted at one existing carbonatite REE deposit in the Hongcheon area of Korea. Proper sampling strategies and baseline data for the interpretation of the results were determined through a pilot study conducted in the area. Enrichment in the concentration of light REE (LREE) over that of heavy REE, which is typical in carbonatite-type deposits, was observed in stream sediments and heavy mineral samples collected during the geochemical survey. Maximum concentrations of LREE were 2,299 and 27,798 mg/kg for stream sediments and heavy minerals, respectively. Among LREEs, La and Ce are the dominant components of all REEs, comprising approximately 68 % of mean concentrations. Considering the distribution pattern of La + Ce contents and the associations with the existing outcropping ore bodies, the zone of prospective REE mineralization was determined to be in the south-western part of the area. A detailed follow-up soil survey of the zone found even higher concentrations of La and Ce (2,450 and 3,100 mg/kg, respectively), and suggested the possible extension of the existing ore bodies. Likewise, a systematic geochemical survey for REE is feasible for locating concealed ore bodies in the area, where the mineralization is mostly covered with soil, and rock outcrops are scarce.     

Climate change in the 21st century simulated by HadGEM2-AO under representative concentration pathways

We present climate responses of Representative Concentration Pathways (RCPs) using the coupled climate model HadGEM2-AO for the Coupled Model Intercomparison Project phase 5 (CMIP5). The RCPs are selected as standard scenarios for the IPCC Fifth Assessment Report and these scenarios include time paths for emissions and concentrations of greenhouse gas and aerosols and land-use/land cover. The global average warming and precipitation increases for the last 20 years of the 21st century relative to the period 1986-2005 are +1.1°C/+2.1% for RCP2.6, +2.4°C/+4.0% for RCP4.5, +2.5°C/+3.3% for RCP6.0 and +4.1°C/+4.6% for RCP8.5, respectively. The climate response on RCP 2.6 scenario meets the UN Copenhagen Accord to limit global warming within two degrees at the end of 21st century, the mitigation effect is about 3°C between RCP2.6 and RCP8.5. The projected precipitation changes over the 21st century are expected to increase in tropical regions and at high latitudes, and decrease in subtropical regions associated with projected poleward expansions of the Hadley cell. Total soil moisture change is projected to decrease in northern hemisphere high latitudes and increase in central Africa and Asia whereas near-surface soil moisture tends to decrease in most areas according to the warming and evaporation increase. The trend and magnitude of future climate extremes are also projected to increase in proportion to radiative forcing of RCPs. For RCP 8.5, at the end of the summer season the Arctic is projected to be free of sea ice.     

Contrast in Fluid M etallogeny between the Tianmashan Au-S Deposit and the Datuanshan Cu Deposit in Tongling, Anhui Province

A comprehensive contrast of ore-forming geological background and ore-forming fluid features, especially fluid ore-forming processes, has been performed between the Tianmashan and the Datuanshan ore deposits in Tongling, Anhui Province. The major reasons for the formation of the stratabound skarn Au-S ore deposit in Tianmashan and the stratabound skarn Cu ore deposit in Datuanshan are analyzed in accordance with this contrast. The magmatic pluton in Tianmashan is rich in Au and poor in Cu, but that in Datuanshan is rich in Cu and Au. The wallrock strata in Tianmashan contain Au-bearing pyrite layers with some organic substance but those in Datuanshan contain no such layers. Moreover, the ore-forming fluids in Tianmashan are dominantly magmatic ones at the oxide and sulfide stages, but those with high content of Cu in Datuanshan are mainly groundwater fluids. In addition, differences in compositional evolution and physicochemical condition variation of the ore-forming fluids result in gradual dispersion     

Real Data Assimilation Using the Local Ensemble Transform Kalman Filter (LETKF) System for a Global Non-hydrostatic NWP model on the Cubed-sphere

An ensemble data assimilation system using the 4-dimensional Local Ensemble Transform Kalman Filter is implemented to a global non-hydrostatic Numerical Weather Prediction model on the cubed-sphere. The ensemble data assimilation system is coupled to the Korea Institute of Atmospheric Prediction Systems Package for Observation Processing, for real observation data from diverse resources, including satellites. For computational efficiency in a parallel computing environment, we employ some advanced software engineering techniques in the handling of a large number of files. The ensemble data assimilation system is tested in a semi-operational mode, and its performance is verified using the Integrated Forecast System analysis from the European Centre for Medium-Range Weather Forecasts. It is found that the system can be stabilized effectively by additive inflation to account for sampling errors, especially when radiance satellite data are additionally used.     

Analytical solution for transient groundwater flow during slug test in vertical cutoff walls

An analysis method for transient groundwater flow during slug tests performed in vertical cutoff walls is presented. The analytical solution for evaluating hydraulic conductivity of vertical cutoff walls is derived by applying the method of images to the previously developed analytical solution that is exclusively applicable to an infinite aquifer. Two distinct boundary conditions are considered to account for the configuration of the vertical cutoff wall: the wall‐soil formation interfaces with or without the existence of filter cakes, that is, constant‐head boundary and no‐flux boundary conditions. A series of type curves is constructed from the analytical solution and compared with those of a partially penetrated well within an aquifer. The constant‐head boundary condition provides faster hydraulic head recovery than the aquifer case. On the other hand, the no‐flux boundary condition leads to a delayed hydraulic head recovery. The greater the shape factor and well offset from the center of the cutoff wall, and the smaller the width of the cutoff wall, the greater the effect of the boundary condition observed in the type curves. This result shows the significance of considering proper boundary conditions at the vertical cutoff wall in analyzing slug tests. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of Data Assimilation Parameters on The Optimized Surface CO<Subscript>2</Subscript> Flux in Asia

In this study, CarbonTracker, an inverse modeling system based on the ensemble Kalman filter, was used to evaluate the effects of data assimilation parameters (assimilation window length and ensemble size) on the estimation of surface CO₂ fluxes in Asia. Several experiments with different parameters were conducted, and the results were verified using CO₂ concentration observations. The assimilation window lengths tested were 3, 5, 7, and 10 weeks, and the ensemble sizes were 100, 150, and 300. Therefore, a total of 12 experiments using combinations of these parameters were conducted. The experimental period was from January 2006 to December 2009. Differences between the optimized surface CO₂ fluxes of the experiments were largest in the Eurasian Boreal (EB) area, followed by Eurasian Temperate (ET) and Tropical Asia (TA), and were larger in boreal summer than in boreal winter. The effect of ensemble size on the optimized biosphere flux is larger than the effect of the assimilation window length in Asia, but the importance of them varies in specific regions in Asia. The optimized biosphere flux was more sensitive to the assimilation window length in EB, whereas it was sensitive to the ensemble size as well as the assimilation window length in ET. The larger the ensemble size and the shorter the assimilation window length, the larger the uncertainty (i.e., spread of ensemble) of optimized surface CO₂ fluxes. The 10-week assimilation window and 300 ensemble size were the optimal configuration for CarbonTracker in the Asian region based on several verifications using CO₂ concentration measurements.