Surveillance of waste disposal activity at sea using satellite ocean color imagers: GOCI and MODIS

Korean Geostationary Ocean Color Imager (GOCI) and Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua observations of the variation in ocean color at the sea surface were utilized to monitor the impact of nutrient-rich sewage sludge disposal in the oligotrophic area of the Yellow Sea. MODIS revealed that algal blooms persisted in the spring annually at the dump site in the Yellow Sea since year 2000 to the present. A number of implications of using products of the satellite ocean color imagers were exploited here based on the measurements in the Yellow Sea. GOCI observes almost every hour during the daylight period, every day since June 2011. Therefore, GOCI provides a powerful tool to monitor waste disposal at sea in real time. Tracking of disposal activity from a large tanker was possible hour by hour from the GOCI timeseries images compared to MODIS. Smaller changes in the color of the ocean surface can be easily observed, as GOCI resolves images at smaller scales in space and time in comparison to polar orbiting satellites, e.g., MODIS. GOCI may be widely used to monitor various marine activities in the sea, including waste disposal activity from ships.     

Enhanced biological activity by an anticyclonic warm eddy during early spring in the East Sea (Japan Sea) detected by the geostationary ocean color satellite

The high primary production enhanced by anticyclonic eddies and hourly variation pattern in the productivity during the spring season in the East Sea were first investigated using the first Korean Geostationary Ocean Color Imager (GOCI). Even though the stratification for a seasonal spring bloom is not well developed in the water column in early April in the East Sea, a physical upward water flux movement at the periphery of the anticyclonic eddies could remain the phytoplankton in euphotic zone to sustain high chlorophyll-a concentration conditions in the Ulleung Basin. At this time, nutrients were no major controlling factor for phytoplankton growth since concentrations of major nutrients (nitrate, silicate, and phosphate) were relatively high in the observed eddy sites based on the observation data from the Korean Oceanographic Data Center (KODC). The estimated mixed layer depth (MLD) significantly shallower at the periphery supports for this mechanism. The hourly primary productivity estimation based on a Carbon-based Productivity Model (CbPM) provides a bimodal pattern along the time especially in L1 with an approximately one order magnitude difference between the lowest and highest values of productivities on 5 April, 2011. Potential possibilities for this large discrepancy in the hourly productivity and some thoughts on a short time in situ incubation method were discussed.     

Late Mesozoic magmatism in the East Qinling Orogen,China and its tectonic implications

The Qinling Orogen in Central China records the history of a complex geological evolution and tectonic transition from compression to extension during the Late Mesozoic,with concomitant voluminous granitoids formation.In this study,we present results from petrological,geochemical,zircon U-Pb-Lu-Hf isotopic studies on the Lengshui felsic dykes from Luanchuan region in the East Qinling Orogen.We also compile published geochronological,geochemical,and Hf isotopic data from Luanchuan region and present zircon Hf isotopic contour maps.The newly obtained age data yield two group of ages at～145 Ma and 140 Ma for two granite porphyries from the Lengshui felsic dykes,with the ～145 Ma interpreted as response to the peak of magmatism in the region,and the ～140 Ma as the timing of formation of the felsic dykes.The corresponding Hf isotopic data of the granite porphyries display negativeeHit)values of-16.67 to-4.61,and Hf crustal model ages(T_(DM~C_)of 2255-1490 Ma,indicating magma sourced from the melting of Paleo-to Mesoproterozoic crustal materials.The compiled age data display two major magmatic pulses at 160-130 Ma and 111-108 Ma with magmatic quiescence in between,and the zircon Hf isotopic data display/ε_(Hf)(t)values ranging from-41.9 to 2.1 and T_(DM)~c values of3387-1033 Ma,suggesting mixed crustal and mantle-derived components in the magma source,and correspond to multiple tectonic events during the Late Mesozoic.The Luanchuan granitoids are identified as 1-type granites and most of these are highly fractionated granites,involving magma mixing and mingling and crystal fractionation.The tectonic setting in the region transformed from the Late Jurassic syn-collision setting to Early Cretaceous within-plate setting,with E-W extension in the Early Cretaceous.This extension is correlated with the N-S trending post-collisional extension between the North China Craton and Yangtze Craton as well as the E-W trending back-arc extension triggered by the westward Paleo-Pacific Plate subduction,eventually leading to lithospheric thinning,asthenospheric upwelling,mafic magma underplating,and crustal melting in the East Qinling Orogen.     

Seismic reliability assessment of lifeline networks using clustering‐based multi‐scale approach

Seismic reliability assessment of lifeline networks gives rise to various technical challenges, which are mostly caused by a large number of network components, complex network topology, and statistical dependence between component failures. For effective risk assessment and probabilistic inference based on post‐hazard observations, various non‐simulation‐based algorithms have been developed, including the selective recursive decomposition algorithm (S‐RDA). To facilitate the application of such an algorithm to large networks, a new multi‐scale approach is developed in this paper. Using spectral clustering algorithms, a network is first divided into an adequate number of clusters such that the number of inter‐cluster links is minimized while the number of the nodes in each cluster remains reasonably large. The connectivity around the identified clusters is represented by super‐links. The reduced size of the simplified network enables the S‐RDA algorithm to perform the network risk assessment efficiently. When the simplified network is still large even after a clustering, additional levels of clustering can be introduced to have a hierarchical modeling structure. The efficiency and effectiveness of the proposed multi‐scale approach are demonstrated successfully by numerical examples of a hypothetical network, a gas transmission pipeline network, and a water transmission network. Copyright © 2014 John Wiley & Sons, Ltd.     

Accuracy of nonlinear static procedures for the seismic assessment of shear critical structures

The nonlinear behavior of reinforced concrete (RC) members represents a key issue in the seismic performance assessment of structures. Many structures constructed in the 1980s or earlier were designed based on force limits; thus they often exhibit brittle failure modes, strength and stiffness degradation, and severe pinching effects. Field surveys and experimental evidence have demonstrated that such inelastic responses affect the global behavior of RC structural systems. Efforts have been made to consider the degrading stiffness and strength in the simplified nonlinear static procedures commonly adopted by practitioners. This paper investigates the accuracy of such procedures for the seismic performance assessment of RC structural systems. Refined finite element models of a shear critical bridge bent and a flexure‐critical bridge pier are used as reference models. The numerical models are validated against experimental results and used to evaluate the inelastic dynamic response of the structures subjected to earthquake ground motions with increasing amplitude. The maximum response from the refined numerical models is compared against the results from the simplified static procedures, namely modified capacity spectrum method and coefficient method in FEMA‐440. The accuracy of the static procedures in estimating the displacement demand of a flexure‐critical system and shear‐critical system is discussed in detail. Copyright © 2015 John Wiley & Sons, Ltd.     

Distribution and Variability of the Meiobenthic Assemblages near the Korean Polymetallic Nodule Claim Area of the Clarion-Clipperton Fracture Zone (Subequatorial NE Pacific)

This study was carried out as part of a baseline long-term environmental project in the proposed mining areas for an environmental impact assessment of future mining in the Clarion-Clipperton Fracture Zone (CCFZ). The community structure and distributional pattern of meiobenthos were investigated in the deep-sea bottom of the Clarion-Clipperton Fracture Zone of the northeastern Pacific in July 1998, 1999, 2001, 2003 and August 2004, 2005. Twenty one meiobenthic groups were found at the stations in the study area. The most abundant meiobenthos comprised nematodes followed by benthic foraminiferans and harpacticoid copepods. The maximum density of meiobenthos was 306 ind/10 cm² at the station located at 11°N (water depth, 4833 m), and the minimum density was 6 ind/10 cm² at the station located at 14°N (water depth, 5037 m). Oligotrophic conditions in the CCFZ seem to directly reflect the lower standing stocks of meiobenthos in the CCFZ compared to other deep-sea plains of similar depth. The latitudinal distribution pattern of meiobenthos in the study area seemed to be related with surface water primary productivity, which was connected to the water circulation pattern of the Pacific Ocean near the Equator, diverging at 8ºN latitude and converging at 5°N. The horizontal distribution of meiobenthic organisms in the study area showed high densities at the stations within 135–136°W. The densities of meiobenthic organismas within the CCFZ were high at stations with few manganese nodules on the sediment surface at low-latitude sites. In 1998, the observed relative high values of meiobenthic abundance were at stations from 5° to 6°N. Other stations from 7° to 10°N showed no significant fluctuations during the interannual sampling periods. It is considered that the inter-annual fluctuation of meiobenthos abundance is intimately related with a regime shift that may have occurred in the north Pacific between 1998 and 1999, the El Niño period. Vertical distribution of meiobenthic organisms showed the highest individual numbers in the surface sediment layers of 0～2 cm depth and a steep decreasing trend as sediment becomes deeper at the stations of high latitude located in 16～17°N. Size distribution analyses showed that organisms that fit into the sieve mesh size of 0.063 mm were abundant.     

Evaluation of the Effect of Marine Ranching Activities on the Tongyeong Marine Ecosystem

Using ecosystem models (Ecopath, Ecosim, and Ecospace), we assessed the structure and function of the Tongyeong marine ranching ecosystem and compared changes in various ecosystem components before and after marine ranching activities. An ecosystem structure model, Ecopath, was used to estimate the changes in biomass and trophic level of major species or groups, the relative contribution of target species or groups to the total flow of energy (throughput), and niche overlaps and impacts of competition between major species or groups. It showed that the Tongyeong ecosystem had 4 trophic levels. A large amount of energy flows occurred at trophic levels 3 and 4, and jacopever rockfish (Sebastes schlegelii) and black rockfish (S. inermis) that were target species for stock enhancement belonged to trophic level 3, indicating that those two species played an important role in the ecosystem. Using an ecosystem dynamic model, Ecosim, the mechanism of dynamic changes in the quantity of target species or groups was investigated to identify the effects of stock enhancement activities and impacts of fishing intensity. After marine ranching activities, the biomass of two target species had increased, while those of most other fish groups decreased. Assuming that fishing mortality was double the current level, the biomass of most fish groups decreased but jacopever rockfish maintained its current stock level due to excessive stock enhancement and low fishing mortality in recent years. An ecosystem space model, Ecospace, was employed to simulate the temporal and spatial dynamics of the biomass of organisms in order to examine how resource enhancement activities have changed the distribution and abundance of target species or groups in the ecosystem. The distribution pattern of jacopever rockfish and black rockfish showed stronger aggregations around reefs and rocky areas with high stock densities after ranching. However, most of the other fish groups exhibited lower densities in the marine ranching area, while they showed higher densities outside the marine ranching area. Thus, it would be necessary to take appropriate holistic management actions based on the ecosystem-based approach to keep the ranching ecosystem healthy and to maintain the fishery production of the ecosystem at the maximum sustainable level.     

Optimization of Chemical Oxygen Demand Determination in Seawater Samples Using the Alkaline Potassium Permanganate Method

Chemical oxygen demand (COD) is a practical parameter that is used to estimate the amount of organic pollutants in aqueous systems. It is generally used as a guideline to control the quality of waste treatment effluent globally and is a management tool to evaluate the total pollution load in the highly developed coastal regions of Korea. It is a preferred method because of the speed and simplicity of the analysis and because there are fewer instrumentation requirements. The Ministry of Oceans and Fisheries (MOF) of the Republic of Korea developed a standard procedure for the measurement of COD. It has been revised several times, and the most recent revision was made in 2013 (MOF 2013–230). In this study, we modified the standard COD measurement procedure (MOF 2013–230), especially the sample digestion apparatus, to enhance analytical efficiency for a large sample number (batch), which is called a Korea Institute of Ocean Science and Technology (KIOST) modified MOF 2013–230. We examined uncertainty related to each experimental step and optimized laboratory conditions to reduce such uncertainties. The detection limit and estimated expanded uncertainty related to the KIOST modified MOF 2013–230 was 0.18 and 0.11 mg O₂/L at a 95% confidence level (k = 2), respectively. This study also provides several tips to maintain consistent COD measurements in seawater using the alkaline potassium permanganate method.     

First record of the percophidid fish <Emphasis Type="Italic">Osopsaron formosensis</Emphasis> (Percophidae: Hemerocoetinae) off Jeju Island,Korea

A specimen of Osopsaron formosensis was collected at the southeastern part of Jeju Island in June 2008. This specimen is to be distinguished from congeneric species using the key characters such as the eye with dorsal iris flap, cheek with scales, elongated dorsal spine, the length and the numbers of the first dorsal spines, and black pigmentation of the dorsal fin membrane. This report was the first record of O. formosensis from Korea. We named it ‘No-ran-tti-nun-tung-ii’ in Korean.     

Numerical simulations using momentum source wave-maker applied to RANS equation model

For Navier-Stokes equation model using the VOF scheme, Lin and Liu (Lin, P. and Liu, P.L.-F. (1999). Internal wave-maker for Navier-Stokes equations models. J. Waterw. Port Coast. Ocean Eng., 125 (4), 207–215.) developed an internal wave-maker method for which a mass source function of the continuity equation was used to generate target wave trains. Using this internal wave-maker method, various numerical experiments have been conducted without any problems due to waves reflected by a wave-maker. In this study, an internal wave-maker method using a momentum source function was proposed. Various numerical simulations in two and three dimensions were performed using the momentum source wave-maker applied to the RANS equation model in a CFD code, FLUENT. To verify their applicability in 2 dimensions, the computational results obtained using the momentum source wave-maker in a channel of constant depth were compared with the results obtained by using the mass source wave-maker and with the analytical solutions. And the results of the present numerical simulations of hydraulic experiments, which represent nonlinear waves on a submerged shoal and breaking waves on a plane beach, were compared with measurements. The comparisons showed good agreements between them. To see their applicability into 3-dimensional cases, the present results in a basin of constant depth were compared with the analytical solutions, and they agreed well with each other. In addition, vertical variation of longshore current was presented by using the 3-dimensional simulation results.