Population Genetic Structure of Rock Bream (<Emphasis Type="Italic">Oplegnathus fasciatus</Emphasis> Temminck &amp; Schlegel, 1884) Revealed by mtDNA COI Sequence in Korea and China

The rock bream, Oplegnathus fasciatus, is a common rocky reef game fish in East Asia and recently has become an aquaculture species. Despite its commercial importance, the population genetic structure of this fish species remains poorly understood. In this study, 163 specimens were collected from 6 localities along the coastal waters of Korea and China and their genetic variation was analyzed with mtDNA COI sequences. A total of 34 polymorphic sites were detected which determined 30 haplotypes. The genetic pattern reveals a low level of nucleotide diversity (0.04 ± 0.003) but a high level of haplotype diversity (0.83 ± 0.02). The 30 haplotypes are divided into two major genealogical clades: one that consists of only Zhoushan (ZS, East China Sea) specific haplotypes from the southern East China Sea and the other that consists of the remaining haplotypes from the northern East China Sea, Yellow Sea, Korea Strait, and East Sea/Sea of Japan. The two clades are separated by approximately 330~435 kyBP. Analyses of AMOVA and F_st show a significant population differentiation between the ZS sample and the other ones, corroborating separation of the two genealogical clades. Larval dispersal and the fresh Yangtze River plume are invoked as the main determining factors for this population genetic structure of O. fasciatus. Neutrality tests and mismatch distribution analyses indicate late Pleistocene population expansion along the coastal waters of Korea and China approximately 133–183 kyBP during which there were periodic cycles of glaciations and deglaciations. Such population information needs to be taken into account when stock enhancement and conservation measures are implemented for this fisheries species.     

Fine-scale Microbial Communities Associated with Manganese Nodules in Deep-sea Sediment of the Korea Deep Ocean Study Area in the Northeast Equatorial Pacific

Despite its potential significance for industrial utilization, any activities associated with the mining of manganese (Mn) nodules might have substantial impacts on benthic ecosystems. Because microorganisms respond quickly to changing environmental conditions, a study of microbial communities provides a relevant proxy to assess possible changes in benthic ecosystems associated with mining activities. We investigated fine-scale microbial community composition and diversity inside and on the surface of Mn nodules and in nearby deep-sea sediments in the Korea Deep Ocean Study (KODOS) area located in the Clarion-Clipperton Fracture Zone (CCFZ) of the northeast equatorial Pacific. Although microbial cell density was lower within nodules (3.21 × 10⁶ cells g^-1) than in sediment (2.14 × 10⁸ cells g^-1), nodules provided a unique habitat for microorganisms. Manganese-oxidizing bacteria including Hyphomicrobium and Aurantimonas in Alphaproteobacteria and Marinobacter in Gammaproteobacteria were abundant in nodules, which implied that these bacteria play a significant role in nodule formation. In contrast, Idiomarina in Gammaproteobacteria and Erythrobacter and Sulfitobacter in Alphaproteobacteria were abundant in sediments. Meanwhile, Thaumarchaeota, a phylum that consists of ammonia-oxidizing chemolithoautotrophs, were the predominant archaeal group both in nodules and sediment. Overall, microbial communities in Mn nodules were unique compared to those observed in sediments. Furthermore, the phylogenetic composition of microorganisms in the KODOS area was distinguishable from that in the nodule provinces claimed by China and Germany in the CCFZ and nodule fields in the central South Pacific Gyre, respectively.     

Seasonal variability of community structure and breeding activity in marine phytal harpacticoid copepods on Ulva pertusa from Pohang,east coast of Korea

Seasonal changes in community structure and reproductive status of phytal harpacticoid copepods in the shallow sublittoral bottom at two sites (Masan-ri and Guryongpo) in Pohang (Korea) are described monthly over a period of 1 year (October 1996 to September 1997). A total of 36 harpacticoid species was identified and the numerically dominant copepods were made up of the families Porcellidiidae and Tisbidae. Although the number of species did not show a seasonal trend, total harpacticoid density revealed a favorable distribution for the warmer season (spring and summer) at both sites. Multiple linear regression analyses showed that univariate indices such as density, evenness and diversity are closely associated with certain environmental parameters. For example, the dominant species fluctuated seasonally in abundance and their maximum densities were found to be temperature- (+ with Porcellidium ofunatense) and nutrient-dependent (+ with Scutellidium longicauda acheloides, + with Zaus unisetosus, and ? with P. wandoensis). In addition, the dominant species appeared to breed year round and their reproductive indices are significantly correlated with some environmental parameters such as temperature (?), pH (+), and phosphate (+). Three species (S. l. acheloides, P. wandoensis, and P. ofunatense) showed maximum density two or three months after their reproductive activity reached a maximum. Overall, the seasonal changes in a phytal harpacticoid community could be explained by combinations of environmental parameters supporting the complexity and biodiversity for this specific group of species in coastal ecosystems.     

Effects of flexibility on propulsive force acting on a heaving foil

The hybrid Cartesian/immersed boundary method is applied to simulate effects of flexibility on propulsive force acting on a heaving foil in a viscous flow. Immersed boundary nodes are distributed inside an instantaneous fluid domain. Velocity vector is reconstructed at the immersed boundary node based on an interpolation along a local normal line. Using the staggered/non-staggered grid method, the demand for pressure at boundary nodes is removed. Elastic deformation of the flexible foil is modelled based on the dynamic thin-plate mechanics. The developed code is validated through comparisons with other computations on flow fields around a flapping foil. The generation of the reverse Karman vortex street is investigated. Forces acting on heaving foils are compared for flexible and rigid cases and the increased thrust of the flexible foil is attributed to the deformed configuration near the tip. The flexibility of the heaving foil decreases vertical force and improves propulsion efficiency. The variations of force and deformation are investigated according to bending stiffness of the foil.     

Late Paleozoic tectonic evolution in northern Korean Peninsula

Since Late Proterozoic era, the Korean Peninsula has been evolved into a state with relatively stable regions and orogenic belts which were developed differently each other. The Late Paleozoie （Late Carboniferous-Early Triassic） sediments are well developed in the Korean Peninsula, and called the Pyongan System. The Pyongan System from Late Carboniferous to Lower Triassic is distributed in the Pyongnan and Hyesan-Riwon Basins, and Rangrim Massif, and divided into Hongjom （ C2 ）, Ripsok （ C2 ）, Sadong （ C2-P1 ）, Kobangsan and Rokam （Taezhawon） （P2-T1） sequences. The sediments of the Tumangang Orogenic Belt are called Tuman System which is composed of the Amgi Series, consisting of elastic formation with mafic effusive material, overlaid by the Kyeryongsan Series, consisting mainly of marie volcano sediments. The Songsang Series which rests on the Kyeryongsan Series mainly consists of elastic formation with minor felsic effusive material. In the Tumangang Orogenic Belt the tectonic movement, called Tumangang Tectonic Movement, occurred in the Lower Permian-Lower Triassic.     

Comparison of sedimentation-compression curves obtained by nuclear and gravimetric methods for Wilkinson Basin,Gulf of Maine,sediments

Accurate measurements of bulk density are important in the construction of sedimentation-compression curves of water-saturated, fine-grained cohesive sediments for consolidation studies. The bulk density of five cores was measured nondestructively on a laboratory nuclear transmission densitometer and the water content, expressed as void ratio, was derived from an empirical relationship between bulk density and water content. Bulk density and water content measured destructively was determined every 10 cm for a comparison with the nuclear data. Agreement between nuclear and gravimetric methods was within ± 0.02 g/cm³ for bulk density ranging from 1.2 to 1.4 g/cm³. Sedimentation-compression curves made using both methods were in generally good agreement.In the Wilkinson Basin, void ratio gradually decreases with increasing effective overburden pressure. This indicates that consolidation by dewatering the surficial sediments is normal and that the environmental conditions during deposition remained relatively constant.     

Convection in a rotating annulus having sidewalls of height-dependent thermal conductance

Abstract

Thermal convection in a vertically-mounted, rotating annulus of a particular design proposed by Davies and Walin (1977) is investigated. The annulus used in the present study differs from the conventional type in some important aspects: the sidewalls are finitely conducting, and the thermal conductance of the sidewalls is height-dependent. The theoretical model due to Davies and Walin is briefly recounted. The present study aims to verify the theoretical model; we have acquired numerical solutions to the governing Navier-Stokes equations. The numerical results are supportive of the theoretical contentions. The near-linear dependence of the isothermal slope on the parameter D, which is a function of Ω and ΔT, is corroborated within reasonable limits. New data on the vertical and radial structures of the meridional and azimuthal flows are presented. The numerical results also confirm that the shape of the sidewall thickness has a substantial influence on the meridional flow patterns. In the bulk of the interior flow field, the dominant azimuthal flow field and the temperature field are linked by the thermal wind relation.     

The role of eddies in solute transport and recovery in rock fractures: Implication for groundwater remediation

A better understanding of solute transport and retention mechanism in rock fractures has been challenging due to difficulty in their direct observations in microscale rough‐walled fractures. Six representative troughs in a rough‐walled fracture were selected for microscale observations of eddy formation with increasing flow velocity and its effect on spatiotemporal changes of solute concentration. This experimental study was enabled by a microscale visualization technique of micro particle image velocimetry. With increasing flow velocity (Re ≤ 2.86), no eddies were generated, and solutes along the main streamlines transported rapidly, whereas those near the wall moved slowly. A larger amount of solutes remained trapped at all troughs at Re = 2.86 than Re < 1. For Re = 8.57, weak eddies started to be developed at the troughs on the lee side, which little contributed to overall solute flushing in the fracture. Accordingly, a large of amount of water was needed for solute flushing. The flow condition of 1 < Re < 10, before a full development of eddies, was least favourable in terms of time and amount of remediation fluid required to reach a target concentration. After large eddies were fully developed at troughs on the lee side for Re = 17.13, solutes were substantially reduced by eddies with less amount of water. Fully developed eddies were found to enhance solute transport and recovery, as opposed to a general consensus that eddies trap and delay solutes. Direct inflow into troughs on the stoss side also made a great contribution to solute flushing out of the troughs. This study indicates that fully developed eddies or strong inflows at troughs are highly possible to form for Re > 10 and this flow range could be favourable for efficient remediation.     

The economics of the marine sector: general equilibrium and ecological analysis

Recent transfers of potential marine wealth to coastal states, resulting from the Third United Nations Convention on the Law of the Sea, have enhanced our awareness that the marine sector might ultimately prove to be a new frontier. The objective of this paper is to initiate work toward the development of a systematic appraoch to the economics of this sector. To this end, the marine sector is assumed to be the fourth factor of production, taking its place with the traditional trio of land, capital and labor. The productivity of this sector is described and analyzed with the aid of a simple general equilibrium model.     

Radial growth rates and Pb ages of hydrothermal massive sulfides from the Juan de Fuca Ridge

Activities of ²³⁸U, ²²⁸Ra, ²²⁶Ra and ²¹⁰Pb were determined in submarine hydrothermal massive sulfides by nondestructive, gamma-ray spectrometry. The samples were collected by the manned submersible DSRV “Alvin” from active hydrothermal fields on the Endeavour Segment and Axial Seamount of the Juan de Fuca Ridge. ²¹⁰Pb activities are mostly below the equilibrium level with ²²⁶Ra, which is linearly correlated with the concentration of Ba, Sr and Ca in the deposits. The ratios of²²⁶Ra to the alkaline earth elements indicate that hydrothermal alteration of the underlying oceanic crust is the dominant source of Ra in the sulfide deposits.The ²¹⁰Pb/Pb ratios measured in many of the sulfides are higher than the ratio obtained for a basalt source of ²¹⁰Pb, probably because of ²¹⁰Pb ingrowth from ²²⁶Ra within the sulfide deposits. An isochron approach employing ratios of ²¹⁰Pb/Pb and ²²⁶Ra/Pb yielded an initial ²¹⁰Pb/Pb ratio in the range of 0–0.57 dpm/μg Pb, implying that the crustal residence time of the hydrothermal fluid in the Endeavour Segment is very short ( < 10 years) and that basalt alteration is the only source of the ²¹⁰Pb and Pb. For the hydrothermal fluid in Axial Seamount, a residence time of 10–20 years is estimated on the basis of the initial ²¹⁰Pb/Pb and ²²⁸Ra/²²⁶Ra ratios of a sulfide chimney. Both residence time estimates are consistent with the results of previous studies. We have estimated the upper limits of sample ages ranging from tens to a hundred years for 12 samples, with the remaining seven samples indicating ages close to or older than 150 years, the practical limit of the ²¹⁰Pb/Pb dating technique.A concentrically sectioned sulfide chimney from Axial Seamount yielded mean radial growth rates ranging from a few tenths to a few mm/year based on gradients of ²¹⁰Pb/Pb and ²²⁸Ra/²²⁶Ra activity ratios, whereas a similarly sectioned chimney from the Endeavour Segment, although collected from the top of an active “black smoker” vent, displayed no ²¹⁰Pb or ²²⁸Ra activity. Our results have implications for the duration and periodicity of hydrothermal circulation and associated mineral deposition at mid-ocean ridges.