Paleoenvironment of deposition of the Dupi Tila Formation,Lalmai Hills,Comilla, Bangladesh

The Dupi Tila Formation is composed of yellow to light brown medium to very fine moderately hard to loose sandstone, siltstone, silty clay, mudstone and shale with some conglomerates with clasts of petrified wood. The lithofacies of matrix supported conglomerate, trough cross bedded conglomerate, massive sandstone, trough cross bedded sandstone, planar cross bedded sandstone, ripple cross laminated sandstone-siltstone, flaser laminated sandstone-shale, lenticular laminated sandstone-siltstone-shale, parallel laminated sandstone-siltstone, wavy laminated shale, parallel laminated blue shale, and mudstone are delineated within this formation. Based on the grain size, sedimentary structures, water depth and genesis of individual facies, facies are grouped into three types of facies associations like (i) coarse-grained conglomerate facies association in relation to tractive current deposits of alluvial fan set up at the base of litho-succession (FAC), (ii) medium to fine-grained sandstone-siltstone-mudstone facies association or facies association in relation to strong tide (FAT) characterizing the middle part of litho-succession, (iii) very fine-grained sandstone-siltstone-mudstone facies association in relation to less frequent weak tide or heterolithic facies association (FAHL) characterizing upper part of litho-succession and shallow marine facies association (FASM) composing the uppermost litho-succession. Presence of gluconite indicates that the depositional environment was shallow to deep marine. The dominant paleoflow direction during the deposition of Dupi Tila Formation was toward southeast to southwestern direction. The rivers were of braided type at the piedmont alluvial depositional set up at the lower part, which later changed to estuarine-tidal flat type environmental set up in the middle part to upper part and paleo-environment was shallow marine in the uppermost part.     

Assessment of subsurface structural elements around greater Cairo by using integrated geophysical tools

Geophysical techniques such as gravity, magnetic and seismology are perfect tools for detecting subsurface structures of local, regional as well as of global scales. The study of the earthquake records can be used for differentiating the active and non-active fault elements. In the current study, more than 2,200 land magnetic stations have been measured using two proton magnetometers. The data are corrected for diurnal variations and then reduced by the International Geomagnetic Reference Field. The corrected data have been interpreted by different techniques after filtering the data to separate shallow sources (basaltic sheet) from the deep sources (basement complex). Both Euler deconvolution and 3-D magnetic modeling were carried out. The results of interpretation indicate that the depth to the upper surface of basaltic sheet ranges from <10 to 600 m, depth to the lower surface ranges from 60 to 750 m, while the thickness of the basaltic sheet varies from <10 to 450 m. Moreover, gravity measurements are conducted at 2,250 stations using a CG-3 gravimeter. The measured values are corrected to construct a Bouger anomaly map. The least squares technique is then applied for regional–residual separation. The third order of least squares is found to be the most suitable to separate the residual anomalies from the regional one. The resultant third-order residual gravity map is used to delineate the structural fault systems of different characteristic trends. The trends show an NW–SE trend parallel to that of Gulf of Suez, an NE–SW trend parallel to the Gulf of Aqaba and an E–W trend parallel to that of the Mediterranean Sea. Taking seismological records into consideration, it is found that most of the 24 earthquake events recorded in the study area are located on fault elements. This gives an indication that the delineated fault elements are active.     

Landscape and a political border determine desert arthropods distribution

We studied the distribution of arthropods in the Arava desert on both sides of the Israeli-Jordanian border, to assess the impact of different anthropogenic pressures on the local fauna. We examined how different landscape units, proximity to agricultural fields, and human societies, might affect the diversity of ground dwelling beetles, and spiders, using ordination and diversity estimation methods. Our results suggest that although both countries contain similar habitats, each has its own unique characteristics, probably due to different cultural practices. The immediate repercussion is that loss of a habitat on one side of the border cannot be compensated with preservation of the same habitat across the border, due to fauna dissimilarity. For example, beetle species can be assembled according to landscape units, but within each landscape unit they show dissimilarities that are based on the geopolitical location. Spiders fail to assemble according to landscape units but cluster as a unique group within Israel. Both landscape unit type and the border, were found to be important for the overall species diversity of this ecosystem and therefore “redundancy” should be carefully applied, especially across geopolitical borders.     

A study on the factors affecting the stable isotopic composition in precipitation of Tamil Nadu,India

Stable isotope measurements in precipitation help us to form the basic inference about the origin and the state of water in different environments. The precipitation samples collected during the South West Monsoon (SWM) during August 2007 from 37 different locations in the state help in deriving the first preliminary local meteoric water line (LMWL) for the Tamil Nadu State. The study reveals that there are three main sources of water vapours, namely South East Arabian Sea (SEAS), Indian Ocean (IO) and evaporation from local water bodies. There are wide variations in the altitude and amount of rainfall received in the state. It is also noted that there is a significant variation in the latitude and the distance from the coast. Hence, an attempt is made in this paper to study the factors controlling the composition of stable isotopes in precipitation with reference to amount of rainfall, latitude, altitude and the continental effect. The altitude and continental effect shows good correlation to the variations in stable isotope composition. Copyright © 2009 John Wiley & Sons, Ltd.     

Tsunami Inundation Modelling for the Coast of Kerala,India

The disastrous tsunami of December 26, 2004, exposed the urgent need for implementing a tsunami warning system. One of the essential requirements of a tsunami warning system is the set up of tsunami inundation models which can predict inundation and run-up along a coastline for a given set of seismic parameters. The Tsunami Warning Centre and the State/District level Disaster Management Centres should have tsunami inundations maps for different scenarios of tsunami generation. In the event of a tsunamigenic earthquake, appropriate decisions on issue of warnings and/or evacuation of coastal population are made by referring to such maps. The nature of tsunami inundation and run-up along the Kerala coast for the 2004 Sumatra and 1945 Makran, and a hypothetical worst-case scenario are simulated using the TUNAMI N2 model and the results are presented in this paper. Further, scenarios of tsunami inundation arising out of possible rise in sea level as projected by the Intergovernmental Panel on Climate Change (IPCC 2001) are also simulated and analysed in the paper. For the study, three representative sectors of the Kerala coast including the Neendakara-Kayamkulam coast, which was the worst hit by the 2004 tsunami, are chosen. The results show that the southern locations and certain locations of central Kerala coast are more vulnerable for Sumatra when compared to Makran 1945 tsunami. From the results of numerical modelling for future scenarios it can be concluded that sea level rise can definitely make pronounced increase in inundation in some of the stretches where the backshore elevation is comparatively low.     

Quantifying the role of sandy–silty sediments in generating slope failures during earthquakes: example from the Algerian margin

The Algerian margin is a seismically active region, where during the last century, several large magnitude earthquakes took place. This study combines geotechnical and sedimentological data with numerical modelling to quantitatively assess the present-day slope stability of the Algerian margin. Geotechnical laboratory tests, such as cyclic triaxial tests, oedometric tests and vane shear tests were carried out on sediment cores collected on the study area. The liquefaction potential of a sediment column located about 30 km from the Boumerdès earthquake epicentre of 21st May 2003 was evaluated theoretically for an earthquake of M _w  = 6.8. We show that thin sand and silt beds such as those described on recovered sediment cores are the main cause of sediment deformation and liquefaction during earthquakes. Numerical calculations showed that the slope failure may occur during an earthquake characterised by a PGA in excess of 0.1g, and also that, under a PGA of 0.2g liquefaction could be triggered in shallow silty–sandy deposits. Moreover, comparison of the predicted slope failure with failure geometries inferred from seafloor morphology showed that earthquakes and subsequent mass movements could explain the present-day morphology of the study area.     

Application of gravity and magnetic methods for the crustal study and delineating associated ores in the western limb of Hazara Kashmir Syntaxis,Northwest Himalayas,Pakistan

The present geophysical study deals with the ores and crustal demonstration of southeastern Hazara and its adjoining areas of Azad Jammu and Kashmir, Pakistan, on the basis of terrestrial gravity and magnetic data. Tectonically, the study area lies in the Lesser Himalayas as well as to an extent in the sub-Himalaya, more specifically in the western limb of Hazara Kashmir Syntaxis. In this study, 567 gravity and 508 magnetic stations have been measured with CG-5 gravimeter and proton precession magnetometer, respectively. The collected data have been processed by applying standard corrections and then different types of maps were prepared. The ores in the area have been delineated by the qualitative interpretation of residual Bouguer anomaly and reduction to pole total magnetic intensity maps, whereas regional structures are demarcated by the Bouguer anomaly and regional Bouguer anomaly maps. The positive contour closures on the residual Bouguer anomaly map indicate the iron ore and phosphate, whereas negative contour closures are the effects of low-density material which consists of gypsum and soapstone. The pole-reduced total intensity map also shows the negative and positive contour closures almost in the same localities and confirms the residual Bouguer anomaly map. The geological model computed on the basis of Bouguer anomaly demarcated a series of faults between different rock units in the study area. The Kashmir Boundary Thrust cuts the western limb of Hazara Kashmir Syntaxis near the apex in the north of Muzaffarabad and marks the boundary between Murree Formation and carbonates of Abbottabad Formation. The gravity model also suggests that the thickness of the crust increases towards the northeast.     

Redefining homogeneous climate regions in Bangladesh using multivariate clustering approaches

Natural Hazards - The knowledge of the climate pattern for a particular region is important for taking appropriate actions to alleviate the impact of climate change. It is also equally important...