Thermal effects in the ultrarelativistic two-stream instability

The dispersion relation for longitudinal waves in a one-dimensional ultrarelativistic plasma is calculated. Analytical and numerical results for the growth rate and frequency of the two-stream instability are presented as a function of the energy spread in the denser stream when the dilute stream is cold. The case of energy spreads in both beams is investigated numerically: it is found that relatively small energy spreads in both streams can lead to suppression of the instability.     

青海南部熔积岩的发现:对寻找VMS型矿床的重要启示

熔积岩指的是侵入、混合到未固结或弱固结的湿沉积物中的熔浆分解、原位形成的一类特殊岩石。正确地认识该类岩石,有利于增进人们对岩浆-水(沉积物)相互作用过程的理解,恢复古环境。在青海南部沱沱河地区发现了一套角砾为撕片状、锯齿状及浑圆状的安山岩,胶结物为铁硅质组合的特殊熔积岩。研究表明,该熔积岩的角砾为岩浆遇水后快速淬火、裂解的产物,铁硅质组合为海底喷气沉积形成的含铁建造;且安山岩与含铁建造发生混合时,含铁建造尚未固结。该套熔积岩的发现,改变了长期以来对开心岭铁矿为火山热液交代安山岩而形成的认识,对于在矿区寻找VMS型矿床、区域内寻找海底热水喷流沉积型矿床具有重要的启示意义。     

Conflicting imaginations: Archaeology, anthropology and geomorphology on Leskernick Hill, Bodmin Moor, southwest Britain

In this paper we view the different practices of archaeology, anthropology, environmental reconstruction and geomorphology through the lens of fieldwork on the clitter fields and Bronze Age settlement patterns on Leskernick Hill, Bodmin Moor, southwest Britain. The moor forms one of the best preserved fossil prehistoric landscapes of Europe and has undergone repeated periglacial episodes during the Quaternary. We show that the characterisation of patterned ground by archaeologists and anthropologists can be very different from that generated by geomorphology, particularly with respect to the spatial scales at which culture/nature questions are posed. We argue that the research project at Leskernick is a good example of how multi-disciplinary work is often more fruitful than mono-disciplinary and provides an example of how conversations across the divides of disciplinary practice can be held.     

The Ectoparasitic Gastropod Boonea (= Odostomia) impressa: Population Ecology and the Influence of Parasitism on Oyster Growth Rates

Abstract. Boonea (= Odostomia) impressa is a common ectoparasite of oysters. In the laboratory, small oysters (Crassostrea virginica) parasitized by natural densities of B. impressa produced 75 % less new shell than unparasitized oysters. Shell deposition rates of previously parasitized oysters increased significantly after all B. impressa were removed. Thus, the decrease in growth rate, although significant, apparently was not permanent. B. impressa preferentially parasitized small, living oysters (≤2.5cm) in the field, even though a higher percentage of large, living oysters (>2.5cm) was available. The snails maintained an aggregated distribution on the oyster reef. The number of B. impressa per oyster clump was positively correlated with the number of living oysters per clump, however some clumps with few or no living oysters had many B. impressa. Thus, food availability only partially explained the pattern of distribution. B. impressa was very mobile. About 50 % of the population moved in one week. Reproduction occurred throughout the year with a peak period in May. Recruitment was greatest in July, however new recruits were observed throughout the year. The reduction in growth rate of parasitized oysters, the snaiľs propensity towards parasitizing small oysters and the snail's tendency to be contagiously distributed suggests that B. impressa potentially exerts a significant influence on the population structure and health of oyster populations.     

Toward a generic method for studying water renewal, with application to the epilimnion of Lake Tanganyika

We present a method, based on the concept of age and residence time, to study the water renewal in a semi-enclosed domain. We split the water of this domain into different water types. The initial water is the water initially present in the semi-enclosed domain. The renewing water is defined as the water entering the domain of interest. Several renewing water types may be considered depending on their origin. We present the equations for computing the age and the residence time of a certain water type. These timescales are of use to understand the rate at which the water renewal takes place. Computing these timescales can be achieved at an acceptable extra computer cost.The above-mentioned method is applied to study the renewal of epilimnion (i.e. the surface layer) water in Lake Tanganyika. We have built a finite element reduced-gravity model modified to take into account the water exchange between the epilimnion and the hypolimnion (i.e. the bottom layer), the water supply from precipitation and incoming rivers, and the water loss from evaporation and the only outgoing river. With our water renewal diagnoses, we show that the only significant process in the renewal of epilimnion water in Lake Tanganyika is the water exchange between the epilimnion and the hypolimnion, other phenomena being negligible.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Using Topological Relationships to Inform a Data Integration Process

When spatial datasets are overlaid, corresponding features do not always coincide. This may be a result of the datasets having differing quality characteristics, being captured at different scales or perhaps being in different projections or datums. Data integration methods have been developed to bring such datasets into alignment. Although these methods attempt to maintain topological relationships within each dataset, spatial relationships between features in different datasets are generally not considered. The preservation of inter‐dataset topology is a research area of considerable current interest. This research addresses the preservation of topology within a data integration process. It describes the functional models established to represent a number of spatial relationships as observation equations. These are used to provide additional information concerning the relative positions of features. Since many topological relationships are best modelled as inequalities, an algorithm is developed to accommodate such relationships. The method, based on least squares with inequalities (LSI), is tested on simulated and real datasets. Results are presented to illustrate the optimal positioning solutions determined using all of the available information. In addition, updated quality parameters are provided at the level of the individual coordinate, enabling communication of local variation in the resultant quality of the integrated datasets.     

Nonthermal radio emission from hot star winds

Nonthermal radio emission has been observed from some of the most luminous hot star winds. It is understood to be synchrotron radiation of the relativistic electrons in the winds. To understand how the electrons are accelerated to such high energies and to correctly explain the observed radio flux and spectra require an exhaustive investigation of all the relevant physical processes involved and possibly point to a complex wind structure. In this paper we discuss the logical path toward a comprehensive model of the nonthermal radio emission from hot star winds. Based on the available observational data and fundamental theoretical considerations, we found that the only physically viable and self-consistent scenario is:the nonthermal radio emission is synchrotron radiation of relativistic electrons the electrons are accelerated by shocks via the first-order Fermi mechanism the acceleration has to be in situ in the radio emitting region the shocks formed at the base of the winds have to propagate to beyond the radio photosphere).     

Effects of heavy metals on the survival ofDiacypris compacta (Herbst) (Ostracoda) from the Coorong,South Australia

The hypermarine southern Coorong is threatened by proposals to drain relatively fresh surface water and groundwater from adjacent agricultural areas into the Coorong. These influent waters carry moderate loads of heavy metals. Acute toxicity of heavy metals toDiacypris compacta, an abundant ostracod in the Coorong, was measured in the laboratory at 18°C in a static system using Coorong water (pH 7.8 salinity 50 ppt). At 4 days (96 h) the mean values of LC₅₀ for copper, zinc, lead and, cadmium respectively were 0.8, 2.1, 3.1 and 4.3 mg L^–1, and at 8 days the respective mean LC₅₀ s were 0.4, 0.7, 2.2 and 1.1 mgL^–1. The effect of two or three metals on mortality was additive in some cases and synergistic in other cases, but generally less than additive. However, in all cases mortality was greater in the presence of two or three metals than in the presence of a single metal. According to ANZECC (1992) guidelines, maximum acceptable concentrations of heavy metals should be no higher than 0.01 x the lowest LC₅₀ value. Using the lowest LC₅₀ values forDiacypris compacta obtained at 8 days, maximum acceptable concentrations in the Coorong would be 4, 5, 9 and 22 gL^–1 for copper, zinc, cadmium and lead respectively, the values for zinc and copper failling below those recommended by ANZECC (1992) for marine waters. Reported concentrations of copper and zinc in surface water and groundwater in areas adjacent to the Coorong sometimes exceed these values, hence drainage of these waters into the Coorong represents a significant hazard to the Coorong biota.