Optimization of a multiple gauge,regulated river‐system model. A system approach

With increasing demands on limited water resources, regulation of larger river systems continues to increase and so too does the need for accurate water accounting and prediction in these systems. River system models are either calibrated manually or automatically on a reach‐by‐reach basis, i.e. each reach is calibrated as a separate entity with little or no consideration of fluxes at other locations within the river system. While this is a practical approach, simulation errors can propagate downstream to make calibration or prediction difficult at those locations. Likewise parameters may suffer from over‐fitting especially where observations are erroneous. We developed and implemented a system calibration strategy in a portion of the Murrumbidgee River, Australia, where parameters for 11 gauges (36 parameters) were calibrated together. Parameter values, model states and model goodness of fit were compared to reach‐by‐reach calibration. The system calibration produced a better goodness of fit across the whole system relative to reach‐by‐reach calibration. Additionally, model system states were more realistic than reach‐by‐reach optimized models. Over‐fitting was obvious using the reach‐by‐reach method for one reach/gauge in particular. This was avoided with system calibration method, with improved goodness of fit at all gauges downstream of the problem gauge. The results here suggest that the system calibration approach provides more hydrologically consistent states, improved overall fit and avoids over‐fitting at problem gauges. Copyright © 2015 John Wiley & Sons, Ltd.     

Phycoremediation of cyanide from coke–oven wastewater using cyanobacterial consortium

Owing to the presence of several toxic pollutants such as cyanide, phenol, ammonium, coke–oven wastewater is being considered as hazardous stream and needs to be treated properly. In the present study, cyanobacterial consortium of Dinophysis acuminata and Dinophysis caudata, collected from East Kolkata Wetland, was used for the treatment of both synthetic cyanide solution and real coke–oven wastewater. The growth kinetics was studied considering nitrate as substrate. Since consortium showed growth in cyanide solution, a model was proposed considering both nitrate and cyanide as substrates. The simulated data match quite well with experimental ones. Two coke–oven wastewater samples were collected—untreated one from equalization tank and another from secondary clarifier effluent and treated with consortium separately. Lipid was extracted from biomass of native cyanobacterial consortium, biomass treated with raw coke–oven wastewater and biomass treated with secondary clarifier effluents. Fatty acid methyl ester of such lipid samples was analyzed using gas chromatograph.     

The Persistence of Warps in Spiral Galaxies with Massive Haloes

We study the persistence of warps in galactic discs in the presence of massive haloes. A disc is approximated by a set of massive rings, while a halo is represented by a conventional n -body simulation. We confirm the conclusion of Nelson &38; Tremaine that a halo responds strongly to an embedded precessing disc. This response invalidates the approximations made in the derivation of classical 'modified tilt' modes. We show that the response of the halo causes the line of nodes of a disc that starts from a modified tilt mode to wind up within a few dynamical times. We explain this finding in terms of the probable spectrum of true normal modes of a combined disc–halo system. The key physical point is that in each radial range the halo rapidly aligns with the disc, so calculations based on the assumption that, in the presence of a warped disc, the halo retains a regular spheroidal structure are based on a fatally flawed assumption.     

Analysis of flood vulnerability and assessment of the impacts in coastal zones of Bangladesh due to potential sea-level rise

The 4th IPCC report highlights the increased vulnerability of the coastal areas from floods due to sea-level rise (SLR). The existing coastal flood control structures in Bangladesh are not adequate to adapt these changes and new measures are urgently necessary. It is important to determine the impacts of SLR on flooding to analyse the performance of the existing structures and corresponding impact to plan for suitable adaptation and mitigation measures to reduce the impacts of floods on coastal zone. The study aims to develop a comprehensive understanding of the possible effects of SLR on floods in the coastal zone of Bangladesh. A hydrodynamic model, which is a combination of surface and river parts, was utilized for flood simulation. The tool was applied under a range of future scenarios, and results indicate both spatial variability of risk and changes in flood characteristics between now and under SLR. Estimated impact on population, infrastructure and transportation is also exposed. These types of impact estimation would be of value to flood plain management authorities to minimize the socio-economic impact.     

Water Level Retrieval Using SARAL/AltiKa Observations in the Braided Brahmaputra River,Eastern India

In this study, water level retrieval over the Brahmaputra river was done using different retracking algorithms for the 40 Hz waveform data of SARAL/AltiKa satellite. Water level was retrieved at 10 different locations of the river to evaluate the performance and accuracy of Ka band altimeter over the braided river system. Different retracking algorithms such as ice-1, ice-2, threshold, and beta parameter were used to retrieve water levels. A correlation and error analysis between the in-situ and satellite altimetry derived river levels was carried out for all the stations. Performance and accuracy analysis has established that water level can be retrieved with less than 40 cm root mean square error (RMSE) for most of the braided reaches of the river. The statistical analysis have found that Beta parameter algorithm has performed best in most of the cases amongst the different retracking algorithms used in this study. The water levels derived from 10 different locations were used to generate water surface elevation profiles for the monsoon and nonmonsoon periods. The water levels and the water surface profiles derived from satellite altimetry indicate the potential use of altimeters for the parameterization and calibration of river hydrological, hydrodynamic and sediment transport models.     

Methane and carbon dioxide sorption on a set of coals from India

Complete sorption isotherm characteristics of methane and CO₂ were studied on fourteen sub-bituminous to high-volatile bituminous Indian Gondwana coals. The mean vitrinite reflectance values of the coal samples are within the range of 0.64% to 1.30% with varying maceral composition. All isotherms were conducted at 30 °C on dry, powdered coal samples up to a maximum experimental pressure of ~ 7.8 MPa and 5.8 MPa for methane and CO₂, respectively.The nature of the isotherms varied widely within the experimental pressure range with some of the samples remained under-saturated while the others attained saturation. The CO₂ to methane adsorption ratios decreased with the increase in experimental pressure and the overall variation was between 4:1 and 1.5:1 for most of the coals. For both methane and CO₂, the lower-ranked coal samples generally exhibited higher sorption affinity compared to the higher-ranked coals. However, sorption capacity indicates a U-shaped trend with rank. Significant hysteresis was observed between the ad/desorption isotherms for CO₂. However, with methane, hysteresis was either absent or insignificant. It was also observed that the coal maceral compositions had a significant impact on the sorption capacities for both methane and CO₂. Coals with higher vitrinite contents showed higher capacities while internite content indicated a negative impact on the sorption capacity.     

Integrated studies for characterization of lineaments used to locate groundwater potential zones in a hard rock region of Karnataka, India

An integrated study was carried out to investigate the subsurface geological conditions in a hard rock environment, with the aim of identifying zones with groundwater resource potential. The study, in Bairasagara watershed, Karnataka, India, considered geomorphology, water level, resistivity imaging, self potential, total magnetic field and susceptibility. The signatures due to lineaments have been clearly identified and their role in groundwater movement has been documented. Synthetic simulation methods were used to model the electrical response of the lineament using finite differential modeling scheme. The inverted image of the field data is compared with the synthetic image and iteration were performed on the initial model until a best match was obtained resulting on the generation of the calibrated resistivity image of the subsurface. Resistivity imaging revealed that the dykes are weathered/fractured to a depth of 6–8 m and are compact at deeper levels, and that they behave as barriers to groundwater movement, yet facilitate a good groundwater potential zone on the upgradient side. The results of magnetic surveys were utilized in differentiating granites and dolerite dykes with an insignificant resistivity contrast. Geomorphological expression alone cannot reveal the groundwater potential associated with a lineament. However, characterizing the nature of the feature at depth with integrated geophysical methods provides essential information for assessing that potential.The online version of the original article can be found at     

Relative performance of focused and unfocused devices in a two-dimensional borehole environment

Borehole direct current (dc) resistivity problems are solved using finite difference method (FDM) primarily to extend the log interpretation in the two-dimensional (2D) domain. Transitional invaded zone, flushed zone, uncontaminated zone, shoulder beds and borehole filled with mud are simulated simultaneously in the model. Linear variation of resistivity is assumed for transitional invaded zone. Normal, lateral and modified laterolog7 (LL7⁴) electrode configuration (discussed in the text) responses were computed using expanding rectangular grid system. LL7⁴ responses with variable geometric factor did show some superiority over the conventional normal and lateral for conductive target beds sandwiched between the resistive beds. For relatively small borehole diameter, all three probes can detect resistive target bed satisfactorily. However, for highly conductive mud both LL7⁴ and normal electrode configuration fail to detect any signal from the target bed. Bypassing effect of the current for LL7⁴ is more than that in normal log. Lateral log shows a signal of conductive invaded zone generated by the conductive mud. Bucking current ratio peaks and the geometric factor peaks in LL7⁴ can detect the bed boundaries.     

Region-specific deterministic and probabilistic seismic hazard analysis of Kanpur city

A seismic hazard map of Kanpur city has been developed considering the region-specific seismotectonic parameters within a 500-km radius by deterministic and probabilistic approaches. The maximum probable earthquake magnitude (M _max) for each seismic source has been estimated by considering the regional rupture characteristics method and has been compared with the maximum magnitude observed \(\left ({M_{\max }^{\text {obs}}}\right )\), \(M_{\max }^{\text {obs}} +0.5\) and Kijko method. The best suitable ground motion prediction equations (GMPE) were selected from 27 applicable GMPEs based on the ‘efficacy test’. Furthermore, different weight factors were assigned to different M _max values and the selected GMPE to calculate the final hazard value. Peak ground acceleration and spectral acceleration at 0.2 and 1 s were estimated and mapped for worst-case scenario and 2 and 10% probability of exceedance for 50 years. Peak ground acceleration (PGA) showed a variation from 0.04 to 0.36 g for DSHA, from 0.02 to 0.32 g and 0.092 to 0.1525 g for 2 and 10% probability in 50 years, respectively. A normalised site-specific design spectrum has been developed considering three vulnerable sources based on deaggregation at the city center and the results are compared with the recent 2011 Sikkim and 2015 Nepal earthquakes, and the Indian seismic code IS 1893.     

Investigation on the Influence of the Column Ozone Anomaly on the Energetics of Tropical Cyclones Over NIO and Related Air–Sea Interaction

An investigation on the temporal and spatial variation of ozone using the total column ozone (TCO) values during the cyclonic activities over North Indian Ocean (NIO) is carried out during the period from 1997 to 2012. The stepwise variation of TCO during the passage of the tropical cyclones over the Bay of Bengal and the Arabian Sea of the NIO is examined. The anomalies in TCO are estimated at each step of the life span of the cyclones starting from the genesis to landfall stages. The result reveals that the TCO values are quite high prior to the formation of the depression over NIO; however, at the stage of cyclogenesis it decreases which, with the increase in the intensity of the cyclones, further decreases and becomes minimum near the coast during the landfall. The maximum negative anomaly in TCO is observed for maximum intensity of the tropical cyclones as well as during the landfall. The result further shows that when the cyclones die out after the landfall the TCO regains the normal value. It is further observed that the reduction in TCO enhances the accumulated cyclone energy over NIO. The result finally shows that, the higher the energy of the cyclones, the lower becomes the stratospheric warming, that is, the higher the stratospheric cooling.