Insights on the process of two-stage coronae formation at olivine-plagioclase contact in mafic dyke from Palghat Cauvery Shear Zone,southern India

Mineralogy and Petrology - Coronae between olivine and plagioclase are a common replacement texture in mafic rocks by magmatic and metamorphic processes. Mafic dykes from Palghat Cauvery Shear Zone...     

Biostratigraphy and depositional environment of the Miocene limestone bed of Baripada,Mayurbhanj district,Odisha: Foraminiferal,sedimentological and bulk organic geochemical evidences

Baripada Marine Beds (BMB) have been studied extensively in terms of its mega fossil content. However, not much has been discussed about the foraminiferal content and the organic matter assemblage in these beds. The fossiliferous sequence of BMB consists of sandstone, shale and limestone units. The present study is persued on the limestone unit of BMB. Foraminiferal, thin section and rock-eval pyrolysis studies were performed on the 33 surface samples collected from five sections of Jamdapal and Mukurmatia region along the Budhabalang river bank. Foraminifera are less abundant in the samples of Jamdapal, whereas Mukurmatia is comparatively rich. First appearance datum of Globorotalia menardii[ranges since middle Miocene (12.6 Ma); FAD at planktic foraminiferal zone N12] and last appearance datum of Neogloboquadrina continuosa [ranges between early Miocene (23.2 Ma) to late Miocene (8.3 Ma); FAD at planktic foraminiferal zone N4B and LAD at N16] together suggest that the limestone unit was deposited in between 12.6 to 8.3 Ma within the upper Miocene. Also, the association of shallow water benthic foraminifera (Species of Ammonia, Asterorotalia, Bolivina, Buliminella, Cibicides, Challengerella, Criboelphidium, Cribononion, Elphidium, Hanzawaia, Nonionella) and planktic foraminifera (Globigerina falcoensis, Globigerina woodi, Globorotalia menardii, Neogloboquadrina continuosa) together with oyster bank and shark teeth suggest deposition of limestone within well oxygenated, tropical, shallow water, open marine condition (within 40m water depth). Lithological and thin section studies together with global sea level fluctuation history advocate that upper Miocene marine transgression promoted the formation of this unit. Bulk organic geochemical data obtained by the rock-eval pyrolysis studies on selected samples indicate a low total organic carbon (TOC), with low hydrogen index (HI), high oxygen index (OI). The organic facies is characterised by type-IV kerogen with major contribution from near shore terrestrial plants. This also suggests deposition in shallow, oxygenated environments that did not promote significant accumulation and preservation of organic content in sediments.     

Simulation–Regression Approximations for Value of Information Analysis of Geophysical Data

Value of information analysis is useful for helping a decision maker evaluate the benefits of acquiring or processing additional data. Such analysis is particularly beneficial in the petroleum industry, where information gathering is costly and time-consuming. Furthermore, there are often abundant opportunities for discovering creative information gathering schemes, involving the type and location of geophysical measurements. A consistent evaluation of such data requires spatial modeling that realistically captures the various aspects of the decision situation: the uncertain reservoir variables, the alternatives and the geophysical data under consideration. The computational tasks of value of information analysis can be daunting in such spatial decision situations; in this paper, a regression-based approximation approach is presented. The approach involves Monte Carlo simulation of data followed by linear regression to fit the conditional expectation expression that is needed for value of information analysis. Efficient approximations allow practical value of information analysis for the spatial decision situations that are typically encountered in petroleum reservoir evaluation. Applications are presented for seismic amplitude data and electromagnetic resistivity data, where one example includes multi-phase fluid flow simulations.     

Environmental assessment and nano-mineralogical characterization of coal,overburden and sediment from Indian coal mining acid drainage

The deterioration of environmental conditions is the major contributory factor to poor health and quality of life that hinders sustainable development in any region.Coal mining is one of the major industries that contribute to the economy of a country but it also impacts the environment.The chemical parameters of the coal,overburden,soil and sediments along with the coal mine drainage(CMD)were investigated in order to understand the overall environmental impact from high sulphur coal mining at northeastern coalfield(India).It was found that the total sulphur content of the coal is noticeably high compared to the overburden(OB)and soil.The volatile matter of the coal is sufficiently high against the high ash content of the soil and overburden.The water samples have a High Electrical Conductivity(EC)and high Total Dissolve Solid(TDS).Lower values of pH,indicate the dissolution of minerals present in the coal as well as other minerals in the mine rejects/overburden.The chemical and nano-mineralogical composition of coal,soil and overburden samples was studied using a High Resolution-Transmission Electron Microscopy(HR-TEM),Energy Dispersive Spectroscopy(EDS),Selected-Area Diffraction(SAED),Field Emission-Scanning Electron Microscopy(FE-SEM)/EDS,X-ray diffraction(XRD),Fourier Transform Infrared Spectroscopy(FTIR),Raman and Ion-Chromatographic analysis,and Mossbauer spectroscopy.From different geochemical analysis it has been found that the mine water sample from Ledo colliery has the lowest pH value of 3.30,Tirap colliery samples have the highest electrical conductivity value of5.40 ms cm~(-1)Both Ledo and Tirap coals have total sulphur contents within the range 3-3.50%.The coal mine water from Tirap colliery(TW-15 B)has high values of Mg~(2+)(450 ppm),and Br~-(227.17 ppm).XRD analysis revealed the presence of minerals including quartz and hematite in the coals.Mineral analysis of coal mine overburden(OB)indicates the presence both of pyrite and marcasite which was also confirmed in XRD and Mossbauer spectral analysis.The presented data of the minerals and ultra/nano-particles present shows their ability to control the mobility of hazardous elements,suggesting possible use in environmental management technology,including restoration of the delicate Indian coal mine areas.     

Genesis of wollastonite- and grandite-rich skarns in a suite of marble-calc-silicate rocks from Sittampundi, Tamil Nadu: constraints on the P–T–fluid regime in parts of the Pan-African mobile belt of South India

The Pan-African tectonothermal activities in areas near Sittampundi, south India, are characterized by metamorphic changes in an interlayered sequence of migmatitic metapelites, marble and calc-silicate rocks. This rock sequence underwent multiple episodes of folding, and was intruded by granite batholiths during and subsequent to these folding events. The marble and the calc-silicate rocks develop a variety of skarns, which on the basis of mineralogy; can be divided into the following types: Type I: wollastonite?+?clinopyroxene (mg#?=?71–73)?+?grandite (16–21 mol% Adr)?+?quartz?±?calcite, Type II: grandite (25–29 mol% Adr )?+?clinopyroxene (mg#?=?70)?+?calcite?+?quartz, and Type III: grandite (36–38 mol% Adr)?+?clinopyroxene (mg#?=?55–65)?+?epidote?+?scapolite?+?calcite?+?quartz. Type I skarn is 2–10 cm thick, and is dominated by wollastonite (>70 vol%) and commonly occurs as boudinaged layers parallel to the regional foliation Sn₁ related to the Fn₁ folds. Locally, thin discontinuous lenses and stringers of this skarn develop along the axial planes of Fn₂ folds. The Type II skarn, on the other hand, is devoid of wollastonite, rich in grandite garnet (40–70 vol%) and developed preferentially at the interface of clinopyroxene-rich calc-silicates layers and host marble during the later folding event. Reaction textures and the phase compositional data suggest the following reactions in the skarns: 1. calcite?+?SiO₂?→?wollastonite?+?V, 2. calcite?+?clinopyroxene?+?O₂?→?grandite?+?SiO₂?+?V, 3. scapolite?+?calcite?+?quartz?+?clinopyroxene?+?O₂?→?grandite?+?V and 4. epidote?+?calcite?+?quartz?+?clinopyroxene?+?O₂?→?grandite?+?V Textural relations and composition of phases demonstrate that (a) silica metasomatism of the host marble by infiltration of aqueous fluids (X_CO2?<?0.15) led to production of large volumes of wollastonite in the wollastonite-rich skarn whereas mobility of FeO, SiO₂ and CaO across the interface of marble and calc-silicate and infiltration of aqueous fluids (X_CO2?<?0.35) were instrumental for the formation of grandite skarns. Composition of minerals in type II skarn indicates that Al₂O₃ was introduced in the host marble by the infiltrating fluid. Interpretation of mineral assemblages observed in the interlayered metapelites and the calcareous rocks in pseudosections, isothermal P-X_CO2 and isobaric T-X_CO2 diagrams tightly bracket the “peak” metamorphic conditions at c.9?±?1 kbar and 750°?±?30°C. Subsequent to ‘peak’ metamorphic conditions, the rocks were exhumed on a steeply decompressive P–T path. The estimated ‘peak’ P–T estimates are inconsistent with the “extreme” metamorphic conditions (>11 kbar and >950°C) inferred for the Pan-African tectonothermal events from the neighboring areas. Field and petrological attributes of these skarn rocks are consistent with the infiltration of aqueous fluid predominantly during the Fn₁ folding event at or close to the ‘peak’ metamorphic conditions. Petrological features indicate that the buffering capacity of the rocks was lost during the formation of type I and II skarns. However, the host rock could buffer the composition of the permeated fluids during the formation of type III skarn. Aqueous fluids derived from prograde metamorphism of the metapelites seem to be the likely source for the metasomatic fluids that led to the formation of the skarn rocks.     

Twin lintel belt in steel for seismic strengthening of brick masonry buildings

A single-room, single-storey full-scale brick masonry building with precast RC roofing system was tested thric eunder displacement controlled lateral cyclic loading, to assess the effectiveness of the basic repair and seismic strengthening techniques. Initially, the virgin building specimen was loaded laterally to failure, In the second stage, the damaged building was repaired by stitching across the cracks, and tested under the same lateral loading. In the third stage, the twice-damaged structure was repaired once more by stitching and strengthened by twin lintel belt in steel and vertical corner reinforcement,and re-tested. The building strengthened by twin lintel belt in steel showed about 28% higher strength under lateral loading than the virgin building.     

The Persistence of Warps in Spiral Galaxies with Massive Haloes

We study the persistence of warps in galactic discs in the presence of massive haloes. A disc is approximated by a set of massive rings, while a halo is represented by a conventional n -body simulation. We confirm the conclusion of Nelson &38; Tremaine that a halo responds strongly to an embedded precessing disc. This response invalidates the approximations made in the derivation of classical 'modified tilt' modes. We show that the response of the halo causes the line of nodes of a disc that starts from a modified tilt mode to wind up within a few dynamical times. We explain this finding in terms of the probable spectrum of true normal modes of a combined disc–halo system. The key physical point is that in each radial range the halo rapidly aligns with the disc, so calculations based on the assumption that, in the presence of a warped disc, the halo retains a regular spheroidal structure are based on a fatally flawed assumption.     

Skills of different mesoscale models over Indian region during monsoon season: Forecast errors

Performance of four mesoscale models namely, the MM5, ETA, RSM and WRF, run at NCMRWF for short range weather forecasting has been examined during monsoon-2006. Evaluation is carried out based upon comparisons between observations and day-1 and day-3 forecasts of wind, temperature, specific humidity, geopotential height, rainfall, systematic errors, root mean square errors and specific events like the monsoon depressions.It is very difficult to address the question of which model performs best over the Indian region? An honest answer is ‘none’. Perhaps an ensemble approach would be the best. However, if we must make a final verdict, it can be stated that in general, (i) the WRF is able to produce best All India rainfall prediction compared to observations in the day-1 forecast and, the MM5 is able to produce best All India rainfall forecasts in day-3, but ETA and RSM are able to depict the best distribution of rainfall maxima along the west coast of India, (ii) the MM5 is able to produce least RMSE of wind and geopotential fields at most of the time, and (iii) the RSM is able to produce least errors in the day-1 forecasts of the tracks, while the ETA model produces least errors in the day-3 forecasts.