Sources and distribution of organic matter in a river-dominated estuary (Winyah Bay, SC, USA)

The sources and distribution of organic matter (OM) in surface waters and sediments from Winyah Bay (South Carolina, USA) were investigated using a variety of analytical techniques, including elemental, stable isotope and organic biomarker analyses. Several locations along the estuary salinity gradient were sampled during four different periods of contrasting river discharge and tidal range. The dissolved organic carbon (DOC) concentrations of surface waters ranged from 7 mg l⁻¹ in the lower bay stations closest to the ocean to 20 mg l⁻¹ in the river and upper bay samples. There was a general linear relationship between DOC concentrations and salinity in three of the four sampling periods. In contrast, particulate organic carbon (POC) concentrations were significantly lower (0.1–3 mg l⁻¹) and showed no relationship with salinity. The high molecular weight dissolved OM (HMW DOM) isolated from selected water samples collected along the bay displayed atomic carbon:nitrogen ratios ([C/N]a) and stable carbon isotopic compositions of organic carbon (δ¹³C_OC) that ranged from 10 to 30 and from −28 to −25‰, respectively. Combined, such compositions indicate that in most HMW DOM samples, the majority of the OM originates from terrigenous sources, with smaller contributions from riverine and estuarine phytoplankton. In contrast, the [C/N]a ratios of particulate OM (POM) samples varied significantly among the collection periods, ranging from low values of 5 to high values of >20. Overall, the trends in [C/N]a ratios indicated that algal sources of POM were most important during the early and late summer, whereas terrigenous sources dominated in the winter and early spring.In Winyah Bay bottom sediments, the concentrations of the mineral-associated OM were positively correlated with sediment surface area. The [C/N]a ratios and δ¹³C_OC compositions of the bulk sedimentary OM ranged from 5 to 45 and from −28 to −23‰, respectively. These compositions were consistent with predominant contributions of terrigenous sources and lesser (but significant) inputs of freshwater, estuarine and marine phytoplankton. The highest terrigenous contents were found in sediments from the river and upper bay sites, with smaller contributions to the lower parts of the estuary. The yields of lignin-derived CuO oxidation products from Winyah Bay sediments indicated that the terrigenous OM in these samples was composed of variable mixtures of relatively fresh vascular plant detritus and moderately altered soil OM. Based on the lignin phenol compositions, most of this material appeared to be derived from angiosperm and gymnosperm vascular plant sources similar to those found in the upland coastal forests in this region. A few samples displayed lignin compositions that suggested a more significant contribution from marsh C₃ grasses. However, there was no evidence of inputs of Spartina alterniflora (a C₄ grass) remains from the salt marshes that surround the lower sections of Winyah Bay.     

Quaternary acid magma in New Zealand

The voluminous Pleistocene—Recent Taupo rhyolites typically contain phenocrysts of plagioclase (oligoclase-labradorite), quartz, titanomagnetite, ilmenite, and ferromagnesian silicates. Ferromagnesian assemblages correlate with well defined Fe-Ti oxide equilibration temperature ranges and allow the rhyolites to be subdivided as follows: (1) Cummingtonite (c)—calcic hornblende (hb)—orthopyroxene (opx); 725–755°C, (2) Hb-opx, 750–825°C, (3) Biotite-hb-(c-opx), 720–765°C, (4) Opx-clinopyroxene (cpx), 860–915°C, (5) Fe olivine-opx-cpx, one sample with temperature of 900°C. Plagioclase and orthopyroxene phenocryst compositions typically exhibit a range of composition up to ～20 mol.%. Calculated average phenocryst equilibration pressures (P _total) range between 0.5–4.9 kb, and average 2.2 kb (～7–8 km depth), indicating upper crustal crystallization. These calculations are very sensitive to variations in phenocryst composition. Calculated \(/_{{\text{H}}_2 {\text{O}}} \) for the amphibole and biotite-bearing rhyolites indicate phenocryst equilibration under \(P_{{\text{H}}_2 {\text{O}}} \simeq P_{{\text{total}}} \) , with \(X_{{\text{H}}_2 {\text{O}}} \) ～0.17–0.24 (5–8 wt. %). The precipitation of cummingtonite is thus temperature dependent, the upper limit being close to 760°C. Eruptive mechanisms of the lavas, pumices, and ash-flow deposits are evidently not primarily controlled by temperature, P _total, \(P_{{\text{H}}_2 {\text{O}}} \) , or crystal content of the magmas, and explanations must lie in kinetic and fluid dynamic behavior of the magmas. For the Taupo rhyolites, it is suggested that the critical size of a magma body (i.e. Rayleigh number) is a controlling factor in that it will influence the convective regime; fully turbulent convection is deduced to have occurred within the larger magma bodies. One consequence is intense vesiculation, prior to eruption, within the uppermost zones of these magma chambers, and the voluminous pumice deposits are believed to emanate from such chambers. Oscillatory compositional zoning within pyroxene phenocrysts is consistent with magma convection.     

Climate change and future flows of Rocky Mountain rivers: converging forecasts from empirical trend projection and down‐scaled global circulation modelling

To predict future river flows, empirical trend projection (ETP) analyses and extends historic trends, while hydroclimatic modelling (HCM) incorporates regional downscaling from global circulation model (GCM) outputs. We applied both approaches to the extensively allocated Oldman River Basin that drains the North American Rocky Mountains and provides an international focus for water sharing. For ETP, we analysed monthly discharges from 1912 to 2008 with non‐parametric regression, and extrapolated changes to 2055. For modelling, we refined the physical models MTCLIM and SNOPAC to provide water inputs into RIVRQ (river discharge), a model that assesses the streamflow regime as involving dynamic peaks superimposed on stable baseflow. After parameterization with 1960–1989 data, we assessed climate forecasts from six GCMs: CGCM1‐A, HadCM3, NCAR‐CCM3, ECHAM4 and 5 and GCM2. Modelling reasonably reconstructed monthly hydrographs (R² about 0·7), and averaging over three decades closely reconstructed the monthly pattern (R² = 0·94). When applied to the GCM forecasts, the model predicted that summer flows would decline considerably, while winter and early spring flows would increase, producing a slight decline in the annual discharge (?3%, 2005–2055). The ETP predicted similarly decreased summer flows but slight change in winter flows and greater annual flow reduction (?9%). The partial convergence of the seasonal flow projections increases confidence in a composite analysis and we thus predict further declines in summer (about ? 15%) and annual flows (about ? 5%). This composite projection indicates a more modest change than had been anticipated based on earlier GCM analyses or trend projections that considered only three or four decades. For other river basins, we recommend the utilization of ETP based on the longest available streamflow records, and HCM with multiple GCMs. The degree of correspondence from these two independent approaches would provide a basis for assessing the confidence in projections for future river flows and surface water supplies. Copyright © 2010 John Wiley & Sons, Ltd.     

Radium uptake during barite recrystallization at 23 ± 2 °C as a function of solution composition: An experimental Ba and Ra tracer study

High-purity synthetic barite powder was added to pure water or aqueous solutions of soluble salts (BaCl₂, Na₂SO₄, NaCl and NaHCO₃) at 23 ± 2 °C and atmospheric pressure. After a short pre-equilibration time (4 h) the suspensions were spiked either with ¹³³Ba or ²²⁶Ra and reacted under constant agitation during 120-406 days. The pH values ranged from 4 to 8 and solid to liquid (S/L) ratios varied from 0.01 to 5 g/l. The uptake of the radiotracers by barite was monitored through repeated sampling of the aqueous solutions and radiometric analysis. For both ¹³³Ba and ²²⁶Ra, our data consistently showed a continuous, slow decrease of radioactivity in the aqueous phase.Mass balance calculations indicated that the removal of ¹³³Ba activity from aqueous solution cannot be explained by surface adsorption only, as it largely exceeded the 100% monolayer coverage limit. This result was a strong argument in favor of recrystallization (driven by a dissolution-precipitation mechanism) as the main uptake mechanism. Because complete isotopic equilibration between aqueous solution and barite was approached or even reached in some experiments, we concluded that during the reaction all or substantial fractions of the initial solid had been replaced by newly formed barite.The ¹³³Ba data could be successfully fitted assuming constant recrystallization rates and homogeneous distribution of the tracer into the newly formed barite. An alternative model based on partial equilibrium of ¹³³Ba with the mineral surface (without internal isotopic equilibration of the solid) could not reproduce the measured activity data, unless multistage recrystallization kinetics was assumed. Calculated recrystallization rates in the salt solutions ranged from 2.8 × 10⁻¹¹ to 1.9 × 10⁻¹⁰ mol m⁻² s⁻¹ (2.4-16 μmol m⁻² d⁻¹), with no specific trend related to solution composition. For the suspensions prepared in pure water, significantly higher rates (∼5.7 × 10⁻¹⁰ mol m⁻² s⁻¹ or ∼49 μmol m⁻² d⁻¹) were determined.Radium uptake by barite was determined by monitoring the decrease of ²²⁶Ra activity in the aqueous solution with alpha spectrometry, after filtration of the suspensions and sintering. The evaluation of the Ra uptake experiments, in conjunction with the recrystallization data, consistently indicated formation of non-ideal solid solutions, with moderately high Margules parameters (W_AB = 3720-6200 J/mol, a₀ = 1.5-2.5). These parameters are significantly larger than an estimated value from the literature (W_AB = 1240 J/mol, a₀ = 0.5).In conclusion, our results confirm that radium forms solid solutions with barite at fast kinetic rates and in complete thermodynamic equilibrium with the aqueous solutions. Moreover, this study provides quantitative thermodynamic data that can be used for the calculation of radium concentration limits in environmentally relevant systems, such as radioactive waste repositories and uranium mill tailings.     

Melt extraction and melt refertilization in mantle peridotite of the Coast Range ophiolite: an LA–ICP–MS study

The middle Jurassic Coast Range Ophiolite (CRO) is one of the most important tectonic elements in western California, cropping out as tectonically dismembered elements that extend 700 km from south to north. The volcanic and plutonic sections are commonly interpreted to represent a supra-subduction zone (SSZ) ophiolite, but models specifying a mid-ocean ridge origin have also been proposed. These contrasting interpretations have distinctly different implications for the tectonic evolution of the western Cordillera in the Jurassic. If an SSZ origin is confirmed, we can use the underlying mantle peridotites to elucidate melt processes in the mantle wedge above the subduction zone. This study uses laser ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS) to study pyroxenes in peridotites from four mantle sections in the CRO. Trace element signatures of these pyroxenes record magmatic processes characteristic of both mid-ocean ridge and supra-subduction zone settings. Group A clinopyroxene display enriched REE concentrations [e.g., Gd (0.938–1.663 ppm), Dy (1.79–3.24 ppm), Yb (1.216–2.047 ppm), and Lu (0.168–0.290 ppm)], compared to Group B and C clinopyroxenes [e.g., Gd (0.048–0.055 ppm), Dy (0.114–0.225 ppm), Yb (0.128–0.340 ppm), and Lu (0.022–0.05 ppm)]. These patterns are also evident in orthopyroxene. The differences between these geochemical signatures could be a result of a heterogeneous upper mantle or different degrees of partial melting of the upper mantle. It will be shown that CRO peridotites were generated through fractional melting. The shapes of REE patterns are consistent with variable degrees of melting initiated within the garnet stability field. Models call for 3% dry partial melting of MORB-source asthenosphere in the garnet lherzolite field for abyssal peridotites and 15–20% further partial melting in the spinel lherzolite field, possibly by hydrous melting for SSZ peridotites. These geochemical variations and occurrence of both styles of melting regimes within close spatial and temporal association suggest that certain segments of the CRO may represent oceanic lithosphere, attached to a large-offset transform fault and that east-dipping, proto-Franciscan subduction may have been initiated along this transform.     

A 44-year high-resolution ocean and atmospheric hindcast for the Mediterranean Basin developed within the HIPOCAS Project

A set of 44-year (1958–2001) homogeneous and high-resolution hindcasts of atmospheric, sea level residuals, and wave states was performed for the Mediterranean Basin within the framework of the HIPOCAS European Project. To this aim, different numerical models were used. As a first step, a Mediterranean high-resolution atmospheric database, suitable to provide realistic and homogeneous forcing for ocean hindcast runs was generated. The HIPOCAS atmospheric database was created by means of dynamical downscaling from the global reanalysis NCEP, using for that the limited area model SN-REMO along with a spectral nudging technique. In a second stage, different Mediterranean oceanic hindcasts were performed. On one hand a long-term database of sea state over the western Mediterranean was generated by means of the wave model WAM and on the other hand a sea level residual database containing storm surge events was obtained from a long-term integration of the HAMSOM model over the entire basin. The three different hindcast runs have been exhaustively validated. On that score, various simulated parameters have been compared to both satellite and in situ measurements. Such comparisons provide a measure of the skills of the different simulated fields to realistically reproduce the observed features. Once these skills are evaluated, a study of the ocean and atmospheric climate trends as well as the interannual variability for the whole 44-year period was carried out with the hindcasted data. The reliability of the data as shown by its comparison to measurements and a proven temporal homogeneity over the 44 years of simulation make the Mediterranean HIPOCAS ocean–atmosphere hindcasted database a useful tool for studies focused on regional climatic variability, as well as for further applications in coastal and environmental decision processes in the Mediterranean area.     

Bathymetry of three deep-sea channels in the northeast and central Tufts Abyssal Plain

The drainage pattern in the northeast and central Tufts Abyssal Plain is described in detail. Satellite navigation on the systematic survey has allowed precise location of the major channel systems of the northeast Pacific Ocean. Two hundred channel profiles were collected from the echograms showing the Moresby-Scott, Mukluk, and Horizon Channel Systems trending in either a southwestward or westward direction across this section of the Tufts Plain. The channel profiles illustrate the prominence of the higher and wider right-hand levee (facing downstream). The Moresby-Scott Channel System disperses in the form of several distributaries throughout the area studied, and is probably responsible for much of the sediment deposits. Unlike the Moresby-Scott, the Mukluk extends throughout the survey area as a solitary channel with one minor branch. The Horizon Channel crosses the Sedna Fracture Zone east of the Sedna Seamount and terminates in distributary fashion in the central portion of the Tufts Plain. The Moresby-Scott, Mukluk, and Horizon Channels form one major system which encompasses the entire northeast and central Tufts Abyssal Plain.     

Evolution of errors in the altimetric bathymetry model used by Google Earth and GEBCO

We analyze errors in the global bathymetry models of Smith and Sandwell that combine satellite altimetry with acoustic soundings and shorelines to estimate depths. Versions of these models have been incorporated into Google Earth and the General Bathymetric Chart of the Oceans (GEBCO). We use Japan Agency for Marine-Earth Science and Technology (JAMSTEC) multibeam surveys not previously incorporated into the models as “ground truth” to compare against model versions 7.2 through 12.1, defining vertical differences as “errors.” Overall error statistics improve over time: 50th percentile errors declined from 57 to 55 to 49 m, and 90th percentile errors declined from 257 to 235 to 219 m, in versions 8.2, 11.1 and 12.1. This improvement is partly due to an increasing number of soundings incorporated into successive models, and partly to improvements in the satellite gravity model. Inspection of specific sites reveals that changes in the algorithms used to interpolate across survey gaps with altimetry have affected some errors. Versions 9.1 through 11.1 show a bias in the scaling from gravity in milliGals to topography in meters that affected the 15–160 km wavelength band. Regionally averaged (>160 km wavelength) depths have accumulated error over successive versions 9 through 11. These problems have been mitigated in version 12.1, which shows no systematic variation of errors with depth. Even so, version 12.1 is in some respects not as good as version 8.2, which employed a different algorithm.     

1999年海城-岫岩地震序列的精准定位

1999年11月29日,北京时间12点10分39秒(04:10:39 UTC)在我国辽宁海城-岫岩地区发生了一次Ms5.4地震.这次地震是继1975年2月4日海城Ms7.3地震之后该地区发生的震级最大的一次地震.区域性的辽宁数字地震台网记录了这一序列的前震、主震与 余震.本文运用该台网的记录资料,用双差法对海城-岫岩地...