Field Investigation of a New Recharge Approach for ASR Projects in Near‐Surface Aquifers

Aquifer storage and recovery (ASR) is the artificial recharge and temporary storage of water in an aquifer when water is abundant, and recovery of all or a portion of that water when it is needed. One key limiting factor that still hinders the effectiveness of ASR is the high costs of constructing, maintaining, and operating the artificial recharge systems. Here we investigate a new recharge method for ASR in near‐surface unconsolidated aquifers that uses small‐diameter, low‐cost wells installed with direct‐push (DP) technology. The effectiveness of a DP well for ASR recharge is compared with that of a surface infiltration basin at a field site in north‐central Kansas. The performance of the surface basin was poor at the site due to the presence of a shallow continuous clay layer, identified with DP profiling methods, that constrained the downward movement of infiltrated water and significantly reduced the basin recharge capacity. The DP well penetrated through this clay layer and was able to recharge water by gravity alone at a much higher rate. Most importantly, the costs of the DP well, including both the construction and land costs, were only a small fraction of those for the infiltration basin. This low‐cost approach could significantly expand the applicability of ASR as a water resources management tool to entities with limited fiscal resources, such as many small municipalities and rural communities. The results of this investigation demonstrate the great potential of DP wells as a new recharge option for ASR projects in near‐surface unconsolidated aquifers.     

Enter the working forest: Discourse analysis in the Northern Forest

In 1988, four states in the northeastern USA commissioned a study to address land use changes in the Northern Forest, 26 million acres of temperate and boreal forest extending from Maine to eastern New York State. Against a backdrop of economic destabilization and concerns regarding social and ecological implications of a real estate boom, the sustained deliberative dialogue catalyzed by this study has come to rely heavily on the ambiguous concept of “working forest.” To clarify political and environmental dynamics in the region, we analyzed how people respond to and seek to capitalize on the interpretive flexibility of the term working forest. We combine an analysis of socio-political discourses of working forest based on a structured literature review with an assessment of local peoples’ definitions of working forest based on a survey conducted in a pair of contrasting New York State communities. The first study site represents an amenity-oriented community (i.e. a place where the forest supports a service economy including recreation and tourism) and the other study site represents a timber-dependent community. By linking data from community-level analysis to data derived from a general analysis of forest politics, we seek to develop a more robust perspective. By comparing discourses across differently structured communities, we investigate how local forest politics are mediated by local economic development processes. Our study empirically illustrates contested and geographically uneven processes of social construction of environment and rural development in a region confronting pressures of globalization. Results indicate that timber harvesting is a heavily privileged management objective, as a logic of ‘the forest that pays is the forest that stays’ dominates. Environmental politics in the region, and perhaps more generally, increasingly conforms to a form of pragmatism in which economic opportunities structure conservation planning and investment.     

Surveying Upstate NY Well Water for Pesticide Contamination: Cayuga and Orange Counties

Private wells in Cayuga and Orange counties in New York were sampled to determine the occurrence of pesticide contamination of groundwater in areas where significant pesticide use coincides with shallow or otherwise vulnerable groundwater. Well selection was based on local groundwater knowledge, risk modeling, aerial photo assessments, and pesticide application database mapping. Single timepoint samples from 40 wells in each county were subjected to 93‐compound chromatographic scans. All samples were nondetects (reporting limits ≤1 μg/L), thus no wells from either county exceeded any of 15 state groundwater standards or guidance values. More sensitive enzyme‐linked immunosorbent assays (ELISA) found two wells with quantifiable atrazine in each county (0.1–0.3 μg/L), one well with quantifiable diazinon (0.1 μg/L) in Orange County, and one well with quantifiable alachlor (0.2 μg/L) in Cayuga County. Trace detections (<0.1 μg/L) in Cayuga County included atrazine (five wells), metolachlor (six wells), and alachlor (one well), including three wells with multiple detections. All 12 Cayuga County wells with ELISA detections had either corn/grain or corn/forage rotations as primary surrounding land uses (although 20 other wells with the same land uses had no detections) and all quantified detections and most trace detections occurred in wells up to 9‐m deep. Orange County trace (<0.1 μg/L) ELISA detections (atrazine three wells, diazinon one well, and metolachlor five wells) and quantified detections were only generally associated with agricultural land uses. Finding acceptable drinking water quality in areas of vulnerable groundwater suggests that water quality in less vulnerable areas will also be good.     

The peterson limestone — early cretaceous lacustrine carbonate deposition in western wyoming and southeastern idaho

The lacustrine Peterson Limestone of western Wyoming and southeastern Idaho comprises six lithofacies throughout its 20,000 km² aerial extent. These are: (1) calcareous sandstone and shale, (2) red nodular limestone, (3) pink sandy micrite, (4) biomicrite, (5) graded silty micrite, and (6) limestone conglomerate. The first two represent floodplain deposition and paleosols, whereas the remaining are shallow nearshore and deeper lacustrine sediments.This sequence was developed in a large fresh, hardwater lake surrounded by fluvial systems and associated flood plains in a warm temperate climate. Well-oxidized sandy terrigenous rocks, together with calcareous paleosol nodules, indicate that flood-plain deposition both preceded and was concurrent with lacustrine carbonate deposition. Micrite and biomicrite formed in deeper parts of the basin while sandy and silty carbonate accumulated in shallower lake-margin areas. Less-calcareous shale units which are interbedded with deeper-water carbonate were deposited either during rapid basin subsidence and deepening of the lake center or during periods of slower carbonate precipitation. Turbidity currents and subaqueous debris flows generated along steeper lake margins, resulted in the deposition of rhythmic layers of graded silty micrite and diamictic limestone conglomerate in the deepest part of the basin. The carbonate-rich sediments comprising these two lithofacies were originally deposited on shallow lake-margin benches and subsequently were transported downslope toward the lake center.Comparison with other carbonate-precipitating lacustrine systems indicates that this lake was not like modern playas. Although no known modern lacustrine system is precisely like Lake Peterson, the flora, fauna, composition, and distribution of facies within modern temperate-region lakes most closely resemble those of the Peterson Limestone.     

Response of a climate model to tidal mixing parameterization under present day and last glacial maximum conditions

Experiments with a climate model were conducted under present day and last glacial maximum conditions in order to examine the model’s response to a vertical mixing scheme based on internal tide energy dissipation. The increase in internal tide energy flux caused by a 120 m reduction in sea level had the expected effect on diffusivity values, which were higher under lower sea level conditions. The impact of this vertical diffusivity change on the Atlantic meridional overturning is not straightforward and no clear relationship between diffusivity and overturning is found. There exists a weak positive correlation between overturning and changes to the power consumed by vertical mixing. Most of the climatic response generated by sea level change was not related to alterations in the internal tide energy flux but rather to the direct change in sea level itself.     

Laboratory wave reflection analysis using co-located gages

Most coastal and ocean engineering laboratories employ techniques that use two or three spatially separated wave gages to estimate reflection of irregular waves in two-dimensional wave flumes. This paper presents a frequency domain method for separating incident and reflected wave spectra from co-located gages (gages located on the same vertical line). The technique is based on linear wave theory, and it can be applied to time series of sea surface elevation and horizontal water velocity collected in a vertical array, or it can be used with horizontal and vertical water velocity time series collected at the same point in the water column. Application of the method is limited to those frequencies showing good coherence between time series signals. Outside the range of good coherence, gross inaccuracies occur.The utility of the co-located gage method is illustrated using water velocity data collected in a wave flume with a laser Doppler velocimeter, and the method is validated for the case of complete reflection by a vertical wall. Side-by-side comparison to the spatially-separated wave gage method of Goda and Suzuki (1976) exhibited close agreement for a variety of irregular wave trains being weakly reflected by a mild sloping beach. The co-located gage method is useful in situations where there are spatial variations in the wavelength, such as on a mildly sloping bottom, or in the region close to highly reflective structures where errors arising from spatial variations in characteristic wave parameters would corrupt estimates made using the spatially-separated wave gage method.     

High-resolution seafloor mapping using the DSL-120 sonar system: Quantitative assessment of sidescan and phase-bathymetry data from the Lucky Strike segment of the Mid-Atlantic Ridge

High-resolution, side-looking sonar data collected near the seafloor (100 m altitude) provide important structural and topographic information for defining the geological history and current tectonic framework of seafloor terrains. DSL-120 kHz sonar data collected in the rift valley of the Lucky Strike segment of the Mid-Atlantic Ridge near 37° N provide the ability to quantitatively assess the effective resolution limits of both the sidescan imagery and the computed phase-bathymetry of this sonar system. While the theoretical, vertical and horizontal pixel resolutions of the DSL-120 system are <1 m, statistical analysis of DSL-120 sonar data collected from the Lucky Strike segment indicates that the effective spatial resolution of features is 1–2 m for sidescan imagery and 4 m for phase-bathymetry in the seafloor terrain of the Mid-Atlantic Ridge rift valley. Comparison of multibeam bathymetry data collected at the sea-surface with deep-tow DSL-120 bathymetry indicates that depth differences are on the order of the resolution of the multibeam system (10–30 m). Much of this residual can be accounted for by navigational mismatches and the higher resolving ability of the DSL-120 data, which has a bathymetric footprint on the seafloor that is 20 times smaller than that of hull-mounted multibeam at these seafloor depths (2000 m). Comparison of DSL-120 bathymetry with itself on crossing lines indicates that residual depth values are ±20 m, with much of that variation being accounted for by navigational errors. A DSL-120 survey conducted in 1998 on the Juan de Fuca Ridge with better navigation and less complex seafloor terrain had residual depth values half those of the Lucky Strike survey. The quality of the bathymetry data varies as a function of position within the swath, with poorer data directly beneath the tow vehicle and also towards the swath edges.Variations in sidescan amplitude observed across the rift valley and on Lucky Strike Seamount correlate well with changes in seafloor roughness caused by transitions from sedimented seafloor to bare rock outcrops. Distinct changes in sonar backscatter amplitude were also observed between areas covered with hydrothermal pavement that grade into lava flows and the collapsed surface of the lava lake in the summit depression of Lucky Strike Seamount. Small features on the seafloor, including volcanic constructional features (e.g., small cones, haystacks, fissures and collapse features) and hydrothermal vent chimneys or mounds taller than 2 m and greater than 9 m² in surface area, can easily be resolved and mapped using this system. These features at Lucky Strike have been confirmed visually using the submersible Alvin, the remotely operated vehicle Jason, and the towed optical/acoustic mapping system Argo II.