Evaluation of drift current parameters using an analytical model

The paper is concerned with the evaluation of the drift current parameters derived through the use of an analytical model. In this model, effective when stratification is stable and indifferent, the vertical turbulence coefficient profile is prescribed by the power function, and hydrodynamic quantities are prescribed using the external parameters of the problem (wind stress, the Coriolis parameter, and the dimensionless stratification parameter). Model data are compared with the observations of the upper mixed layer in the vicinity of the oceanic Station C, conducted during one year. It is shown that, under the spring-summer-time warming conditions, the model at issue is capable of adequately simulating the upper ocean layer dynamics. Translated by Vladimir A. Puchkin.     

The dynamic method of calculating currents and analysis of the vertical kinematic structure

The basic relations of the classical dyamic method have been complemented with the condition allowing for the non-monotonicity of the vertical kinematic structure. The elements of the multi-layered system of geostrophic currents have been found to correlate over depth with seawater density and hydrostatic pressure distribution. An example of the analysis of the vertical structure of currents, involving specific hydrological data, is given. Translated by Vladimir A. Puchkin.     

Laboratory wave reflection analysis using co-located gages

Most coastal and ocean engineering laboratories employ techniques that use two or three spatially separated wave gages to estimate reflection of irregular waves in two-dimensional wave flumes. This paper presents a frequency domain method for separating incident and reflected wave spectra from co-located gages (gages located on the same vertical line). The technique is based on linear wave theory, and it can be applied to time series of sea surface elevation and horizontal water velocity collected in a vertical array, or it can be used with horizontal and vertical water velocity time series collected at the same point in the water column. Application of the method is limited to those frequencies showing good coherence between time series signals. Outside the range of good coherence, gross inaccuracies occur.The utility of the co-located gage method is illustrated using water velocity data collected in a wave flume with a laser Doppler velocimeter, and the method is validated for the case of complete reflection by a vertical wall. Side-by-side comparison to the spatially-separated wave gage method of Goda and Suzuki (1976) exhibited close agreement for a variety of irregular wave trains being weakly reflected by a mild sloping beach. The co-located gage method is useful in situations where there are spatial variations in the wavelength, such as on a mildly sloping bottom, or in the region close to highly reflective structures where errors arising from spatial variations in characteristic wave parameters would corrupt estimates made using the spatially-separated wave gage method.     

The effects of oil exploration and production in the northern North Sea: Part 2—microbial biodegradation of hydrocarbons in water and sediments, 1978–1981

The potential of heterotrophs to degrade aromatic hydrocarbons derived from oil in water and sediments in the northern North Sea around the Brent, Beryl, Forties and Murchison oilfields and at a number of stations, from the Forties field to the Firth of Forth, was estimated using 1-¹⁴C naphthalene and 7, 10-¹⁴C benzo(a)pyrene. The degradation of uniformly labelled ¹⁴C mixed 1-amino acids was used as a measure of total heterotrophic activity. Results showed that microorganisms have the potential to degrade the smaller aromatic hydrocarbon molecules rapidly in the water column and in surface sediments. Close to the Beryl platform, where diesel-washed drill cuttings have been continuously dumped, the rate of input of hydrocarbons to the sediment has exceeded the rate of degradation. Mineralization of benzo(a)pyrene, estimated in the sediments only, was minimal. Close to production platforms the biodegradation rate of mixed 1-amino acids showed no increase comparable with that found for naphthalene, suggesting that existing microbial populations had not increased but adapted to degrade oil in water and sediments.     

Problems of modeling climate and climate change

The properties of the climate system as a physical object are considered. Major concepts of the mathematical theory of climate are stated, and the problems of constructing mathematical climate models are discussed. The results of reproducing the present-day climate are analyzed, and the sensitivity of the climate system to changes in the content of greenhouse gases is considered. Major directions are formulated in which the development of the mathematical theory of climate and of modeling climate and climate change is possible.     

Current-influenced depositional provinces, continental margin off Cape Hatteras, identified by petrologic method

Analyses of DSRV “Alvin” core samples on the Cape Hatteras margin indicate major textural and compositional changes at depths of about 1000 and well below 2500 m. The distribution patterns of petrologic parameters correlate well with water mass flow and suspended-sediment plumes measured on this margin by other workers. Our study also shows: (a) vigorous erosion and sediment transport at depths of less than 400 m resulting from the NE-trending Gulf Stream flow; (b) deposition, largely planktonic-rich sediment released from the Gulf Stream, on the upper- to mid-slope, to depths of about 800–1200 m; (c) winnowing, resuspension and deposition induced by periodically intensified slope currents on the mid-slope to uppermost rise, between about 1000 and 2500 m; and (d) prevailing deposition on the upper rise proper (below 2500 m), from transport by the SW-trending Western Boundary Undercurrent. Sediments moved by bottom currents have altered the composition and distribution patterns of material transported downslope by offshelf spillover; this mixing of gravity-emplaced and bottom-current-transported sediment obscures depositional boundaries. Moreover, reworking of the seafloor by benthic organisms alters physical properties and changes erodability of surficial sediments by bottom currents. Measurement of current flow above the seafloor and direct observation of the bottom are insufficient to delineate surficial sediment boundaries. Detailed petrologic analyses are needed to recognize the long-term signature of processes and define depositional provinces.     

Manganese and iron distributions off central California influenced by upwelling and shelf width

In July 2002, a combination of underway mapping and discrete profiles revealed significant along-shore variability in the concentrations of manganese and iron in the vicinity of Monterey Bay, California. Both metals had lower concentrations in surface waters south of Monterey Bay, where the shelf is about 2.5 km wide, than north of Monterey Bay, where the shelf is about 10 km wide. During non-upwelling conditions over the northern broad shelf, dissolvable iron concentrations measured underway in surface waters reached 3.5 nmol L⁻¹ and dissolved manganese reached 25 nmol L⁻¹. In contrast, during non-upwelling conditions over the southern narrow shelf, dissolvable iron concentrations in surface waters were less than 1 nmol L⁻¹ and dissolved manganese concentrations were less than 5 nmol L⁻¹. A pair of vertical profiles at 1000 m water depth collected during an upwelling event showed dissolved manganese concentrations of 10 decreasing to 2 nmol L⁻¹, and dissolvable iron concentrations of 12–20 nmol L⁻¹ in the upper 100 m in the north, compared to 3.5–2 nmol L⁻¹ Mn and 0.6 nmol L⁻¹ Fe in the upper 100 m in the south, suggesting the effect of shelf width influences the chemistry of waters beyond the shelf.These observations are consistent with current understanding of the mechanism of iron supply to coastal upwelling systems: Iron from shelf sediments, predominantly associated with particles greater than 20 μm, is brought to the surface during upwelling conditions. We hypothesize that manganese oxides are brought to the surface with upwelling and are then reduced to dissolved manganese, perhaps by photoreduction, following a lag after upwelling.Greater phytoplankton biomass, primary productivity, and nutrient drawdown were observed over the broad shelf, consistent with the greater supply of iron. Incubation experiments conducted 20 km offshore in both regions, during a period of wind relaxation, confirm the potential of these sites to become limited by iron. There was no additional growth response when copper, manganese or cobalt was added in addition to iron. The growth response of surface water incubated with bottom sediment (4 nmol L⁻¹ dissolvable Fe) was slightly greater than in control incubations, but less than in the presence of 4 nmol L⁻¹ dissolved iron. This may indicate that dissolvable iron is not as bioavailable as dissolved iron, although the influence of additional inhibitory elements in the sediment cannot be ruled out.