Global comparison of the regional rainfall results of enhanced greenhouse coupled and mixed layer ocean experiments: Implications for climate change scenario development

The extent of agreement amongst current global climate models (GCMs) on the global pattern of rainfall change simulated under enhanced greenhouse conditions is assessed. We consider the results of five experiments which use a simple mixed layer ocean formulation and five which use a fully dynamic ocean model (coupled experiments). For many regions of the northern hemisphere there is strong agreement amongst both mixed layer and coupled experiments on the sign of simulated rainfall change. However, in the southern hemisphere there are large, and apparently systematic, differences between the coupled and mixed layer experiments. In particular, whereas the mixed layer experiments agree on simulated rainfall increase in summer in the tropics and subtropics of the Australian sector, the coupled experiments agree (although more weakly) on rainfall decreases. These differences appear to relate to the much reduced warming simulated by the coupled experiments in the high latitudes of the southern hemisphere. However, recent oceanographie evidence suggests that this suppressed warming may be considerably overestimated. We conclude therefore that despite the in-principle advantages of coupled models, it may be too soon to base some regionally specific climate change scenarios solely on the results of coupled experiments.     

Megamaser galaxies

An analysis of a sample of OH megamaser galaxies is presented. It is shown that the dependence of L_OH on L_FIR (far infrared) is not quadratic, as previously assumed, but closer to linear. In megamaser galaxies, L_C (radio continuum) L_FIR1. Analysis of the data also shows that as the OH emission line width decreases, the absolute values of the pumping efficiency and maser amplification coefficient increase. The radio luminosity of the central component in these galaxies increases with a decrease in the ratio L_FIR/L_C, whereas the FIR luminosity remains constant. These results will, in all probability, force a reexamination of the questions of pumping and maser emission mechanisms in megamaser galaxies.Translated fromAstrofizika, Vol. 39, No. 3, pp. 417–429, July–September, 1996.     

On solving Kepler's equation for nearly parabolic orbits

We deal here with the efficient starting points for Kepler's equation in the special case of nearly parabolic orbits. Our approach provides with very simple formulas that allow calculating these points on a scientific vest-pocket calculator. Moreover, srtarting with these points in the Newton's method we can calculate a root of Kepler's equation with an accuracy greater than 0.001 in 0–2 iterations. This accuracy holds for the true anomaly || 135° and |e – 1| 0.01. We explain the reason for this effect also.Dedicated to the memory of Professor G.N. Duboshin (1903–1986).     

A filament eruption and accompanying coronal field changes on November 5, 1992

An H filament eruption on November 5, 1992 was fully observed in H with the Hida Flare Monitoring Telescope, while Yohkoh's Soft X-ray Telescope observed the pre- and post-eruption evolution of the coronal magnetic fields. From the H data, including the red and blue wings, we have reconstructed the rise of the filament, including trajectory, velocity, and acceleration. In combination with the Yohkoh data this reconstruction suggests that the filament had several interactions with other coronal magnetic fields during the eruption. The Yohkoh data also shows pre-eruption changes in the coronal fields and several post-eruption bright coronal structures. The pre-eruption changes are interpreted as a partial opening of the corona, indicating that it is not necessary to have a complete opening of the corona in order for a filament to erupt and we discuss the several possible contributions from emerging flux. The post-event bright coronal structures are compared with theory and with a cleaner filament eruption event on July 31, 1992. These comparisons suggest that, although there are many similarities, it is hard to completely reconcile the observations with the existing theory.     

Some comparisons between mining-induced and laboratory earthquakes

Although laboratory stick-slip friction experiments have long been regarded as analogs to natural crustal earthquakes, the potential use of laboratory results for understanding the earthquake source mechanism has not been fully exploited because of essential difficulties in relating seismographic data to measurements made in the controlled laboratory environment. Mining-induced earthquakes, however, provide a means of calibrating the seismic data in terms of laboratory results because, in contrast to natural earthquakes, the causative forces as well as the hypocentral conditions are known. A comparison of stick-slip friction events in a large granite sample with mining-induced earthquakes in South Africa and Canada indicates both similarities and differences between the two phenomena. The physics of unstable fault slip appears to be largely the same for both types of events. For example, both laboratory and mining-induced earthquakes have very low seismic efficiencies where _a is the apparent stress and is the average stress acting on the fault plane to cause slip; nearly all of the energy released by faulting is consumed in overcoming friction. In more detail, the mining-induced earthquakes differ from the laboratory events in the behavior of as a function of seismic momentM ₀. Whereas for the laboratory events 0.06 independent ofM ₀, depends quite strongly onM ₀ for each set of induced earthquakes, with 0.06 serving, apparently, as an upper bound. It seems most likely that this observed scaling difference is due to variations in slip distribution over the fault plane. In the laboratory, a stick-slip event entails homogeneous slip over a fault of fixed area. For each set of induced earthquakes, the fault area appears to be approximately fixed but the slip is inhomogeneous due presumably to barriers (zones of no slip) distributed over the fault plane; at constant , larger events correspond to larger _a as a consequence of fewer barriers to slip. If the inequality _a / 0.06 has general validity, then measurements of _a =µE _a /M ₀, where is the modulus of rigidity andE _a is the seismically-radiated energy, can be used to infer the absolute level of deviatoric stress at the hypocenter.     

Evidence of magmatic CO2-rich fluids in peraluminous graphite-bearing leucogranites from Deep Freeze Range (northern Victoria Land,Antarctica)

Fine-grained peraluminous synkinematic leuco-monzogranites (SKG), of Cambro-Ordovician age, occur as veins and sills (up to 20–30 m thick) in the Deep Freeze Range, within the medium to high-grade metamorphics of the Wilson Terrane. Secondary fibrolite + graphite intergrowths occur in feldspars and subordinately in quartz. Four main solid and fluid inclusion populations are observed: primary mixed CO₂+H₂O inclusions + Al₂SiO₅ ± brines in garnet (type 1); early CO₂-rich inclusions (± brines) in quartz (type 2); early CO₂+CH₄ (up to 4 mol%)±H₂O inclusions + graphite + fibrolite in quartz (type 3); late CH₄+CO₂+N₂ inclusions and H₂O inclusions in quartz (type 4). Densities of type 1 inclusions are consistent with the crystallization conditions of SKG (750°C and 3 kbar). The other types are post-magmatic: densities of type 2 and 3 inclusions suggest isobaric cooling at high temperature (700–550°C). Type 4 inclusions were trapped below 500°C. The SKG crystallized from a magma that was at some stage vapour-saturated; fluids were CO₂-rich, possibly with immiscible brines. CO₂-rich fluids (±brines) characterize the transition from magmatic to post-magmatic stages; progressive isobaric cooling (T<670°C) led to a continuous decrease off _{O 2} can entering in the graphite stability field; at the same time, the feldspars reacted with CO₂-rich fluids to give secondary fibrolite + graphite. Decrease ofT andf _{O 2} can explain the progressive variation in the fluid composition from CO₂-rich to CH₄ and water dominated in a closed system (in situ evolution). The presence of N₂ the late stages indicates interaction with external metamorphic fluids.Contribution within the network Hydrothermal/metamorphic water-rock interactions in crystalline rocks: a multidisciplinary approach on paleofluid analysis. CEC program: Human Capital and Mobility     

Nd,Sr, and Pb isotopic characteristics of Cretaceous intrusive rocks from deep levels of the Sierra Nevada batholith,Tehachapi Mountains,California

The Cretaceous gabbroic to granitic intrusive rocks of the Tehachapi Mountains were emplaced at depths of 25–30 km and thus afford a view of deep processes in the Sierra Nevada batholith. They consist of the 115 Ma Tehachapi suite and the 100 Ma Bear Valley suite; new zircon U-Pb age data reveal the presence of the latter as far west as Grapevine Canyon. The Nd, Sr, Pb, and O isotopic whole-rock data and zircon Pb inheritance patterns for the bulk of the suites suggest an origin by mixing between depleted mantlederived magmas and metasedimentary material with a substantial component of old continental material. However, this mixing is not evident in variations between isotopic ratios and chemical and lithologic parameters. This implies that isotopic hybridization of magmas took place deeper than 30 km, and that fractionation processes are likely responsible for the bulk of the chemical variation in this part of the Sierra Nevada batholith. Consideration of the isotopic data in the context of the Sierra Nevada batholith as a whole suggests that the well-known east-to-west isotopic gradients in the batholith may reflect a change in the average isotopic character of the preintrusive frame-work rather than a change in amount of crustal component. On the other hand, the lack of areal gradients in Sr and Nd isotopic ratios in the main study area may indicate a lack of pronounced gradation at deep levels, at least within the western batholith.     

Gold mineralization in As-rich mesothermal gold ores of the Bogosu-Prestea mining district of the Ashanti Gold Belt,Ghana: remobilization of “invisible” gold

The Bogosu-Prestea mining district of southwestern Ghana is a 33 km section of the Early Proterozoic Ashanti Gold Belt. Greenschist facies carbonaceous and carbonate-bearing turbidites and greywackes, and mafic dikes host numerous economic mesothermal gold deposits. Structurally higher ores in the Bogosu concession have brittle deformation and consist of disseminated-sulphide lodes in tectonically-disrupted sedimentary rocks and carbonate-altered mafic dikes. Most gold occurs as micrometre-size particles in arsenian pyrite, and as invisible gold in arsenian pyrite and arsenopyrite. The structurally deeper ores of the adjoining Prestea concession are associated with brittle-ductile deformation and consist of extensive crack-seal quartz-veins and graphitic shear zones. Only minor amounts of invisible gold were detected; in these deeper lodes, gold occurs dominantly as abundant microscopic and larger particles in sulphide/arsenide minerals and in gangue. The gold distribution patterns revealed by SIMS microprobe analysis and ion maps, EMP and colour staining suggest that most of the primary gold in the Bogosu-Prestea system precipitated in solid-solution with sulphide/arsenide minerals. However, post-depositional concentration and redistribution occurred, in increasing degree with: 1) increase in metamorphic/hydrothermal gradients in the gold system (depth), 2) decrease in the refractory properties of the host mineral, and 3) increase in the amount of post-depositional, host-mineral recrystallization and deformation. Gold evolved from primary solid-solution within sulphide/arsenide minerals, to colloidal and micrometre-size particles concentrated in voids, fractures and internal grain boundaries, and finally to microscopic and larger particles at sulphide/arsenide grain margins and in the gangue assemblage. The general conclusions presented here are applicable to As-rich gold deposits of all ages, worldwide. The presence of gold in late fractures is insufficient evidence for late-stage introduction of gold in mesothermal gold systems.     

Stable isotope study of antimony deposits in the Muratdagi region,western Turkey

The Muratdagi region is rich in antimony deposits having the following common characteristics: post Miocene age, location on the down-thrown blocks next to normal faults, in the vicinity of active or fossil thermal springs, and in contact with carbonate rocks. The isotopic composition of — 7. SMOW of the mineralizing fluid calculated from the measured ° ¹⁸O of quartz and the fluid inclusion microthermometry, is indicative of meteoric water origin. The ° ¹³C of the inclusion CO₂ of — 19.1 to — 25.4 PDB is indicative of interaction with organic material-graphite. The ° ³⁴S of stibnite — 3.6 to — 0.7 is, in view of the mineral assemblage, indicative of magmatic origin of the sulphur. A tightly confined set of structural, lithological, hydrological and geochemical features define a sequence of geochemical processes; formation of acid and reducing fluid, leaching and transport of antimony complexes and precipitation of stibnite within defined lithological units. The set of processes seems to have taken place within a space of 5000 m lateral and 1000 m vertical extension.     

Optical absorption investigation of Cr3+ ion-bearing minerals in the temperature range 77–797 K

The effect of raising temperature on spin-allowed dd-transitions of octahedral Cr³⁺ was studied for various point symmetries of the Cr³⁺-bearing structural sites, i.e. 3 m and 3 with inversion center in spinel and garnets, respectively, or 32, 3, 2 and 1, lacking the inversion centre, in beryl, corundum, diopside and topaz, respectively. For this purpose, crystals of Cr³⁺-bearing spinel, pyrope, andradite, grossular, uvarovite, emerald, ruby, diopside and topaz were analyzed by microprobe, oriented, and measured in polarized radiation (except for the cubic minerals) in the spectral range 30 000 to 11 100 cm^-1 and at temperatures between 77 and 797 K. The evaluation of the intensities, half widths, and energy positions of bands due to Cr³⁺-transitions derived from ⁴ A _2g ⁴ T _2g (F) and ⁴ T _1g (F) as well as of Dq- and B-values derived, had the following results:In all cases, red shift of the above bands and, hence, independent on the site symmetry of Cr³⁺, decreases in the Dq-values were obtained. The dependcies of Dq on T are nearly linear above room temperature and amount between -1.6% in topaz and -5.1% in pyrope in the temperature range studied. From this, values for the local thermal expansion of the Cr³⁺-centered octahedra, _loc, were derived on the basis of the R _M-0 ^-5 -proportionality of 10Dq. Such values are consistently higher than those obtained from X-ray refinements, a method averaging r_m-o for all the respective octahedral positions.