Fisheries mismanagement

We analysed the extent to which European politicians have adhered to scientific recommendations on annual total allowable catches (TACs) from 1987 to 2011, covering most of the period of the Common Fisheries Policy (CFP). For the 11 stocks examined, TACs were set higher than scientific recommendations in 68% of decisions. Politically-adjusted TACs averaged 33% above scientifically recommended levels. There was no evidence that the 2002 reform of the CFP improved decision-making, as was claimed at the time. We modelled the effects of such politically-driven decision-making on stock sustainability. Our results suggest that political adjustment of scientific recommendations dramatically increases the probability of a stock collapsing within 40 years.In 2012 European fisheries policy will undergo a once-a-decade reform. Ten years ago radical reforms were promised but the changes failed to improve sustainability. It is likely that the 2012 reform will be similarly ineffective unless decision-making is changed so that catch allocations are based on science rather than politics.     

Surface-structure-controlled sectoral zoning of the rare earth elements in fluorite from Long Lake, New York, and Bingham, New Mexico, USA

The concentration and distribution of rare earth elements (REE) in sectorally zoned fluorite crystals from Long Lake, New York, and the Hansonburg Mining District, Bingham, New Mexico, have been studied using cathodoluminescence and synchrotron X-ray fluorescence microanalysis (SXRFMA). In cubo-octahedral samples from Long Lake, New York, Ce, Nd, Gd, Dy, Ho, Er, and Tm are preferentially partitioned into the |111| sector relative to the |100| sector. Partition coefficients (K_d = concentration in |111| sector/concentration in |100| sector) range between 3.5 for Ce, to 1.4 for Tm, with a general decrease in K_d as elements deviated from the ionic radius of Ca²⁺, for which REE substitute in fluorite. Diffusion of the REE has occurred, as evidenced by gradual changes in composition over distances of 0.2 to 0.3 mm at sector boundaries.In Bingham samples, three different partition coefficients were determined for Dy: K_d|100|/|111| = 2.83, K_{d |100|/|110|} = 1.77, and K_{d |110|/|111|} = 1.60. These are mean K_d values for a 95% confidence interval. In another sample from the same deposit, Dy, Er, and Gd were found to be preferentially incorporated into the |100| sector relative to the |210| sector with average K_{d |100|/|210|} of 3.1, 2.4, and 2.9, respectively. In a third sample, Nd was found to be preferentially incorporated into the |110| sector relative to the |321| sector with an average K_{d |110|/|321|} value of 2.3.Compositional heterogeneities in a given sector (concentric zoning) have been resolved using SXRFMA but are significantly less than the concentration difference across sector boundaries. Often fluorite exists in a wide variety of morphologies, as is the case in the Hansonburg Mining District of Bingham. We suggest caution when using the REE as petrogenetic indicators because fluorite trace element chemistry can vary greatly among crystals within a deposit depending on the internal morphology of a particular crystal.     

Estimates of Lithospheric Failure Cycle Parameters from Regional Earthquake Catalogues

Izvestiya, Physics of the Solid Earth - Abstract—Based on the generalized frequency–magnitude relation for earthquakes, the failure cycle parameters are estimated from regional seismic...     

Stress Sensitivity of Seismic and Electric Rock Properties of the Upper Continental Crust at the KTB

We test the hypothesis that the general trend of P-wave and S-wave sonic log velocities and resistivity with depth in the pilot hole of the KTB site Germany, can be explained by the progressive closure of the compliant porosity with increasingly effective pressure. We introduce a quantity θ_c characterizing the stress sensitivity of the mentioned properties. An analysis of the downhole measurements showed that estimates of the quantitiy θ_c for seismic velocities and electrical formation factor of the in situ formation coincide. Moreover, this quantity is 3.5 to 4.5 times larger than the averaged stress sensitivity obtained from core samples. We conclude that the hypothesis mentioned above is consistent with both data sets. Moreover, since θ_c corresponds approximately to the inverse of the effective crack aspect ratio, larger in situ estimates of θ_c might reflect the influence of fractures and faults on the stress sensitivity of the crystalline formation in contrast to the stress sensitivity of the nearly intact core samples. Finally, because the stress sensitivity is directly related to the elastic nonlinearity we conclude that the elastic nonlinearity (i.e., deviation from linear stress-strain relationship i.e., Hooke's law) of the KTB rocks is significantly larger in situ than in the laboratory.     

Fluid-induced seismicity: Pressure diffusion and hydraulic fracturing

Borehole fluid injections are common for the development of hydrocarbon and geothermic reservoirs. Often they induce numerous microearthquakes. Spatio-temporal dynamics of such induced microseismic clouds can be used to characterize reservoirs. However, a fluid-induced seismicity can be caused by a wide range of processes. Here we show that linear pore pressure relaxation and a hydraulic fracturing are two asymptotic end members of a set of non-linear diffusional phenomena responsible for seismicity triggering. To account for the whole range of processes we propose a rather general non-linear diffusional equation describing the pore pressure evolution. This equation takes into account a possibly strong enhancement of the medium permeability. Both linear pore pressure relaxation and hydraulic fracturing can be obtained as special limiting cases of this equation. From this equation we derive the triggering front of fluid induced seismicity, which is valid in the general case of non-linear pore pressure diffusion. We demonstrate corresponding seismicity signatures on different case studies.     

The effect of lithology on valley width,terrace distribution,and bedload provenance in a tectonically stable catchment with flat‐lying stratigraphy

How rock resistance or erodibility affects fluvial landforms and processes is an outstanding question in geomorphology that has recently garnered attention owing to the recognition that the erosion rates of bedrock channels largely set the pace of landscape evolution. In this work, we evaluate valley width, terrace distribution, and bedload provenance in terms of reach scale variation in lithology in the study reach and discuss the implications for landscape evolution in a catchment with relatively flat‐lying stratigraphy and very little uplift. A reach of the Buffalo National River in Arkansas was partitioned into lithologic reaches and the mechanical and chemical resistance of the main lithologies making up the catchment was measured. Valley width and the spatial distribution of terraces were compared among the different lithologic reaches. The surface grain size and provenance of coarse (2–90 mm) sediment of both modern gravel bars and older terrace deposits that make up the former bedload were measured and defined. The results demonstrate a strong impact of lithology upon valley width, terrace distribution, and bedload provenance and therefore, upon landscape evolution processes. Channel down‐cutting through different lithologies creates variable patterns of resistance across catchments and continents. Particularly in post‐tectonic and non‐tectonic landscapes, the variation in resistance that arises from the exhumation of different rocks in channel longitudinal profiles can impact local base levels, initiating responses that can be propagated through channel networks. The rate at which that response is transmitted through channels is potentially amplified and/or mitigated by differences between the resistance of channel beds and bedload sediment loads. In the study reach, variation in lithologic resistance influences the prevalence of lateral and vertical processes, thus producing a spatial pattern of terraces that reflects rock type rather than climate, regional base level change, or hydrologic variability. Copyright © 2017 John Wiley & Sons, Ltd.     

Algal δ15N values detect a wastewater effluent plume in nearshore and offshore surface waters and three-dimensionally model the plume across a coral reef on Maui, Hawai'i, USA

The coral reef at Kahekili, Maui is located ~300 m south of the Lahaina Wastewater Reclamation Facility which uses four Class V injection wells to dispose of 3-5 million gallons of wastewater effluent daily. Prior research documented that the wastewater effluent percolates into the nearshore region of Kahekili. To determine if the wastewater effluent was detectable in the surface waters offshore, we used algal bioassays from the nearshore region to 100 m offshore and throughout the water column from the surface to the benthos. These algal bioassays documented that significantly more wastewater effluent was detected in the surface rather than the benthic waters and allowed us to generate a three-dimensional model of the wastewater plume in the Kahekili coastal region. Samples located over freshwater seeps had the highest δ(15)N values (~30-35‰) and the effluent was detected in surface samples 500 m south and 100 m offshore of the freshwater seeps (~8-11‰).     

Sulfide intrusion in the tropical seagrasses Thalassia testudinum and Syringodium filiforme

Sulfur and oxygen dynamics in the seagrasses Thalassia testudinum and Syringodium filiforme and their sediments were studied in the US Virgin Islands (USVI) in order to explore sulfide intrusion into tropical seagrasses. Four study sites were selected based on the iron concentration in sediments and on proximity to anthropogenic nutrient sources. Meadow characteristics (shoot density, above- and below-ground biomass, nutrient content) were sampled along with sediment biogeochemistry. Sulfide intrusion was high in T. testudinum, as up to 96% of total sulfur in the plant was derived from sediment-derived sulfides. The sulfide intrusion was negatively correlated to the turnover of sulfides in the sediments regulated by both plant parameters and sediment sulfur pools. Sediment iron content played an indirect role by affecting sulfide turnover rates. Leaf production was negatively correlated with sulfide intrusion suggesting that active growth reduced sulfide intrusion. Sulfide intrusion was lower in S. filiforme (up to 44%) compared to T. testudinum consistent with a higher internal nighttime oxygen concentrations found for S. filiforme. When S. filiforme can take advantage of its ability to maintain high internal oxygen concentrations, as was the case on the USVI, it could increase its success in colonizing unvegetated disturbed sediments with potentially high sulfide concentrations.     

A Boundary-Layer Scaling for Turbulent Katabatic Flow

Scaling relationships are proposed for the turbulent katabatic flow of a stably stratified fluid down a homogeneously cooled planar slope—the turbulent analogue of a Prandtl-type slope flow. The \(\Pi \) Theorem predicts that such flows are controlled by three non-dimensional parameters: the slope angle, the Prandtl number, and a Reynolds number defined in terms of the surface thermal forcing (surface buoyancy or surface buoyancy flux), Brunt-Väisälä frequency, slope angle, and molecular viscosity and diffusivity coefficients. However, by exploiting the structure of the governing differential equations in a boundary-layer form, scaled equations are deduced that involve only two non-dimensional parameters: the Prandtl number and a modified Reynolds number. In the proposed scaling framework, the slope angle does not appear as an independent governing parameter, but merely acts as a stretching factor in the scales for the dependent and independent variables, and appears in the Reynolds number. Based on the boundary-layer analysis, we hypothesize that the full katabatic-flow problem is largely controlled by two rather than three parameters. Preliminary tests of the scaling hypothesis using data from direct numerical simulations provide encouraging results.