Oxidation of CO on surface hematite in high CO2 atmospheres

We propose a mechanism for the oxidation of gaseous CO into CO₂ occurring on the surface mineral hematite (Fe₂O₃(s)) in hot, CO₂-rich planetary atmospheres, such as Venus. This mechanism is likely to constitute an important source of tropospheric CO₂ on Venus and could at least partly address the CO₂ stability problem in Venus’ stratosphere, since our results suggest that atmospheric CO₂ is produced from CO oxidation via surface hematite at a rate of 0.4 petagrammes (Pg) CO₂ per (Earth) year on Venus which is about 45% of the mass loss of CO₂ via photolysis in the Venusian stratosphere. We also investigated CO oxidation via the hematite mechanism for a range of planetary scenarios and found that modern Earth and Mars are probably too cold for the mechanism to be important because the rate-limiting step, involving CO(g) reacting onto the hematite surface, proceeds much slower at lower temperatures. The mechanism may feature on extrasolar planets such as Gliese 581c or CoRoT-7b assuming they can maintain solid surface hematite which, e.g. starts to melt above about 1200 K. The mechanism may also be important for hot Hadean-type environments and for the emerging class of hot Super-Earths with planetary surface temperatures between about 600 and 900 K.     

Swift observations of the X-ray and UV evolution of V2491 Cyg (Nova Cyg 2008 No. 2)

We present extensive, high-density Swift observations of V2491 Cyg (Nova Cyg 2008 No. 2). Observing the X-ray emission from only one day after the nova discovery, the source is followed through the initial brightening, the super-soft source phase and back to the pre-outburst flux level. The evolution of the spectrum throughout the outburst is demonstrated. The UV and X-ray light curves follow very different paths, although changes occur in them around the same times, indicating a link between the bands. Flickering in the late-time X-ray data indicates the resumption of accretion. We show that if the white dwarf (WD) is magnetic, it would be among the most magnetic known; the lack of a periodic signal in our later data argues against a magnetic WD, however. We also discuss the possibility that V2491 Cyg is a recurrent nova, providing recurrence time-scale estimates.     

40Ar‐39Ar step‐heating of impact glasses from the Nördlinger Ries impact crater—Implications on excess argon in impact melts and tektites

Seven impact melts from various places in the Nördlinger Ries were dated by ⁴⁰Ar‐³⁹Ar step‐heating. The aim of these measurements was to increase the age data base for Ries impact glasses directly from the Ries crater, because there is only one Ar‐Ar step‐heating spectrum available in the literature. Almost all samples display saddle‐shaped age spectra, indicating the presence of excess argon in most Ries glass samples, most probably inherited argon from incompletely degassed melt and possibly also excess argon incorporated during cooling from adjacent phases. In contrast, moldavites usually contain no inherited argon, probably due to their different formation process implying solidification during ballistic transport. The plateau age of the only flat spectrum is 14.60 ± 0.16 (0.20) Ma (2σ), while the total age of this sample is 14.86 ± 0.20 (0.22) Ma (isochron age: 14.72 ± 0.18 [0.22] Ma [2σ]), proofing the chronological relationship of the Ries impact and moldavites. The total ages of the other samples range between 15.77 ± 0.52 and 20.4 ± 1.0 Ma (2σ), implying approximately 2–40% excess ⁴⁰Ar (compared to the nominal age of the Ries crater) in respective samples. Thus, the age of 14.60 ± 0.16 (0.20) (2σ) (14.75 ± 0.16 [0.20 Ma] [2σ], calculated using the most recent suggestions for the K decay constants) can be considered as reliable and is within uncertainties indistinguishable from the most recent compilation for the age of the moldavite tektites.     

Coeval argon‐40/argon‐39 ages of moldavites from the Bohemian and Lusatian strewn fields

Abstract— ⁴⁰Ar/³⁹Ar ages of four tektites (moldavites) from southern Bohemia (near ?eské Budějovice, Czech Republic) and a tektite from Lusatia (near Dresden, Germany) have been determined by 11 step‐degassing experiments. The purpose of the study was to enlarge the ⁴⁰Ar/³⁹Ar data base of moldavites and to check the age relations of the Bohemian and Lusatian samples. The mean plateau‐age of the Bohemian samples, which range from 14.42 to 14.70 Ma, is 14.50 ± 0.16 (0.42) (2σ) Ma (errors in parentheses include age error and uncertainty of standard monitor age). The plateau age of the Lusatian sample of 14.38 ± 0.26 (0.44) (2σ) Ma confirms the previously published ⁴⁰Ar/³⁹Ar age of 14.52 ± 0.08 (0.40) (2σ) Ma, and demonstrates that the fall of Lusatian and Bohemian tektites were contemporaneous. Because of their geochemistry and their ages there is no doubt that the Lusatian tektites are moldavites. Accepting that moldavites are ejecta from the Nördlinger Ries impact, the new ages also date the impact event. This age is slightly younger (about 0.2–0.3 Ma) than the age suggested by earlier K‐Ar determinations.     

The magnetic properties of Quaternary and Tertiary sediments in the southern North Sea

Cores from boreholes penetrating late Quaternary, glacial, interglacial and postglacial sediments and the underlying late Cenozoic delta complex of the southern North Sea have been examined for their magnetic properties. A magnetic polarity stratigraphy has been established as an aid to biostratigraphic dating of the sediments; the Kaena-Gauss and Gauss—Matuyama transitions and the base and top of the Olduvai subchron have been identified. The strength and stability of laboratory-induced isothermal remanent magnetisation display clear magneto-petrological variations, which match lithostratigraphic changes in the cores. Principal component analysis has picked out a basin-wide and palaeoenvironmental consistency in the magnetic data. Large, multi-domain magnetite grains predominate in the post-deltaic and fluvio-deltaic sediments, whereas smaller greigite or titanomagnetite grains are concentrated in the intertidal and marine deltaic facies. Since heavy mineral analysis indicates that most of the deltaic detritus derived from common source areas, the differences in magnetic mineralogy have probably been caused by the sediment transport processes operating within the delta complex.     

Comparison of single-domain and dual-domain subsurface transport models

Subgrid modeling of some type is typically used to account for heterogeneity at scales below the grid scale. The single-domain model (SDM), employing field-scale dispersion, and the dual-domain model (DDM), employing local hydrodynamic dispersion and exchange between domains having large hydraulic conductivity contrasts, are well-known examples. In this paper, the two modeling approaches are applied to tritium migration from the H-area seepage basins to a nearby stream--Fourmile Branch--at the Savannah River Site. This location has been monitored since 1955, so an extensive dataset exists for formulating realistic simulations and comparing the results to data. It is concluded that the main parameters of both models are scale-dependent, and methods are discussed for making initial estimates of the DDM parameters, which include mobile/immobile porosities and the mass exchange coefficient. Both models were calibrated to produce the best fit to recorded tritium data. When various attributes of the dataset were considered, including cumulative tritium activity discharged to Fourmile Branch, plume arrival time, and plume attenuation due to closure of the seepage basins in 1988, the DDM produced results superior to the SDM, while causing no unrealistic upgradient dispersion. A sensitivity analysis showed that only the DDM was able to accurately produce both the instantaneous activity discharge and cumulative activity with a single parameter set. This is thought to be due to the advection-dominated nature of transport in natural porous media and the more realistic treatment of this type of transport in the DDM relative to the SDM.     

Melt extraction pathways and stagnation depths beneath the Madeira and Desertas rift zones (NE Atlantic) inferred from barometric studies

The Madeira and Desertas Islands (eastern North Atlantic) show well-developed rift zones which intersect near the eastern tip of Madeira (São Lourenço peninsula). We applied fluid inclusion barometry and clinopyroxene-melt thermobarometry to reconstruct levels of magma stagnation beneath the two adjacent rifts and to examine a possible genetic relationship during their evolution. Densities of CO₂-dominated fluid inclusions in basanitic to basaltic samples from São Lourenço yielded frequency maxima at pressures of 0.57–0.87 GPa (23–29 km depth) and 0.25–0.32 GPa (8–10 km), whereas basanites, basalts and xenoliths from the Desertas indicate 0.3–0.72 GPa (10–24 km) and 0.07–0.12 GPa (2–3 km). Clinopyroxene-melt thermobarometry applied to Ti-augite phenocryst rim and glass/groundmass compositions indicates pressures of 0.45–1.06 GPa (15–35 km; São Lourenço) and 0.53–0.89 GPa (17–28 km; Desertas Islands) which partly overlap with pressures indicated by fluid inclusions. We interpret our data to suggest a multi-stage magma ascent beneath the Madeira Archipelago: main fractionation occurs at multiple levels within the mantle (>15 km depth) and is followed by temporary stagnation within the crust prior to eruption. Depths of crustal magma stagnation beneath São Lourenço and the Desertas differ significantly, and there is no evidence for a common shallow magma reservoir feeding both rift arms. We discuss two models to explain the relations between the two adjacent rift systems: Madeira and the Desertas may represent either a two-armed rift system or two volcanic centres with separate magma supply systems. For petrological and volcanological reasons, we favour the second model and suggest that Madeira and the Desertas root in distinct regions of melt extraction. Magma focusing into the Desertas system off the hotspot axis may result from lithospheric bending caused by the load of the Madeira and Porto Santo shields, combined with regional variations in melt production due to an irregularly shaped plume.Electronic Supplementary Material Supplementary material is available for this article if you access the article at . A link in the frame on the left on that page takes you directly to the supplementary material.Editorial responsibility: J. Hoefs     

Low-grade metamorphic rocks from the Pulur complex,NE Turkey: implications for the pre-Liassic evolution of the Eastern Pontides

In the Pulur complex (Sakarya Zone, Eastern Pontides, Turkey) a low-grade tectonometamorphic unit (Doankavak) is exposed in three tectonic windows beneath a complex medium-pressure high-temperature metamorphic unit of late Carboniferous age. The thrust plane between both units is transgressively covered by Liassic conglomerates. The Doankavak unit comprises a sequence of metabasites with MORB-type chemical compositions and phyllites, with subordinate calcareous phyllites, marbles, quarzofeldspathic schists and metacherts. This sequence is interpreted as a former accretionary complex related to the consumption of the Palaeotethys. Mineral parageneses in the metabasites allow for the distinction of two domains with slightly different peak metamorphic conditions, i.e. 375–425 °C/0.5–0.8 GPa (greenschist facies) and 400–470 °C/0.6–1.1 GPa (albite-epidote amphibolite facies). The age of metamorphism is constrained at ~ 260 Ma (early Late Permian) by two Rb-Sr mineral-whole rock ages (hornblende, phengite) and one ⁴⁰Ar/³⁹Ar single step total fusion age (phengite). In conjunction with previous data on other accretionary complexes in the Sakarya zone in Northern Turkey, the data presented in this study suggest a continuous subduction of the Palaeotethys at least from Early/Late Permian to Late Triassic and a discontinuous preservation of accretion complexes in both space and time.     

Petrology of Al- and Cr-rich ophiolitic chromitites from the Muğla,SW Turkey: implications from composition of chromite,solid inclusions of platinum-group mineral,silicate, and base-metal mineral,and Os-isotope geochemistry

Ultramafic rocks around the city of Muğla in SW Turkey are represented by mantle peridotites depleted to various degrees, ranging from cpx-rich harzburgites to depleted harzburgite and dunite. Cpx-rich harzburgites are thought to be the residua left after extraction of MORB-type basalt, from which high-Al chromitite [49.2 < Cr# = 100 × Cr/(Cr + Al) < 53.5] crystallised with a higher proportion of ¹⁸⁷Os/¹⁸⁸Os (average of 0.1361). However, depleted harzburgites are assumed to be the residua left after extraction of hydrous boninitic melt produced by second stage partial melting of already depleted mantle due to a subducting slab, from which high-Cr chromitites (64.2 < Cr# < 85.9) with lower and heterogeneous ¹⁸⁷Os/¹⁸⁸Os ratio (average of 0.1324) were crystallised as a result of melt–rock interaction in a supra-subduction environment. Dunites around the chromite deposits are considered to be the product of melt–peridotite interaction. Most of the chromitites contain high-Cr chromite and display enrichment in IPGE (Os, Ir, Ru) over PPGE (Rh, Pt, Pd), with PGE concentrations between 61 and 1,305 ppb. Consistently, laurite-erlichmanite series minerals with various Os concentrations are found to be the most abundant PGM inclusions in chromite. Os–Ir–Ru alloy, irarsite, and kashinite, as well as Pt–Fe alloy and Pt-oxide, which are not common in ophiolitic chromitites, were also detected as magmatic PGM inclusions. Pentlandite, millerite, and, rarely heazlewoodite form the magmatic inclusions of base-metal sulphide. The presence of olivine and clinopyroxene, as well as hydrous silicate inclusions such as amphibole and phlogopite, in high-Cr chromitite supports the idea that high-Cr chromitites were formed in a supra-subduction environment.