Models of travel demand with endogenous preference change and heterogeneous agents

In the literatures of regional science, urban economics, and urban development planning, a working assumption is that individuals respond to incentives and regulations, given their preferences. Models for planning and policy analyses are used to consider what might occur if the incentives or regulations were different. In these models, however, preferences are usually assumed to be given and stable, and agents are usually assumed to be homogeneous. This paper focuses on the implications of making preferences in models of policy implementation endogenously determined and time varying heterogeneous agents. We consider first the recent literature on intertemporal choice and preference change, which cuts across many disciplines, and more briefly the literature on norm-regarding behavior. We then elaborate a simple model of transportation demand—from a static to a dynamic orientation, from fixed and exogenously given preferences of strictly self-regarding agents to endogenously determined and policy-induced preferences of heterogeneous agents—and illustrate its characteristics with simple numerical examples.     

Lithospheric thermal and compositional structure of South China jointly inverted from multiple geophysical observations

The detailed lithospheric structure of South China is the basis for the understanding of tectonic processes of eastern China.Specifically,two essential issues in the study of lithospheric structure are the thermal and compositional structures,which are usually derived from either geophysical or geochemical observations.However,inversions from single geophysical or geochemical datasets have certain limitations,making it necessary to develop joint inversions of geophysical,geochemical and petrological datasets.In this paper,through thermodynamic simulation and probabilistic inversion,we inverted multiple datasets including topography,geoid height,surface heat flow and surface wave dispersion curves for the 3D lithospheric thermal and compositional structure of South China.The results reveal a thin(<100 km)and flat LAB beneath the South China Fold System Block and the lower Yangtze Craton.Also,we found that the lithospheric mantle is primarily composed of saturated peridotite,indicating that the ancient refractory lithospheric mantle has been replaced by new materials.The dominant dynamic mechanism for lithospheric thinning in eastern South China may be the flat subduction of ancient Pacific slab,while thermal erosion may have also played a significant role.In contrast,the LAB depth beneath the Sichuan Basin is much thicker(>200 km),suggesting that the thick and cold craton lithospheric roots are retained.There may exist a discontinuous interface beneath the Sichuan Basin,with the saturated lower layer thicker than the refractory upper layer.As a result,the lithospheric mantle of the Sichuan Basin and surrounding regions is mainly composed of saturated and transitional peridotite.     

Application of saddlepoint approximation in reliability analysis of dynamic systems

The application of the saddlepoint approximation to reliability analysis of dynamic systems is investigated. The failure event in reliability problems is formulated as the exceedance of a single performance variable over a prescribed threshold level. The saddlepoint approximation technique provides a choice to estimate the cumulative distribution function (CDF) of the performance variable. The failure probability is obtained as the value of the complement CDF at a specif ied threshold. The method requires computing the saddlepoint from a simple algebraic equation that depends on the cumulant generating function (CGF) of the performance variable. A method for calculating the saddlepoint using random samples of the performance variable is presented. The applicable region of the saddlepoint approximation is discussed in detail. A 10-story shear building model with white noise excitation illustrates the accuracy and effi ciency of the proposed methodology.     

Lateral continuity of basement seismic reflections in 15 Ma ultrafast-spreading crust at ODP Site 1256

The Ocean Drilling Program (ODP) initiated drilling at Site 1256D in the Guatemala Basin, about 1,000 km off the East Pacific Rise to penetrate plutonic rocks, anticipated to be relatively shallow in this region, formed at an ultra-fast spreading rate. IODP Expedition E312 successfully drilled into gabbros at ~1,150 m in basement. Multi-channel seismic traces show weak laterally coherent sub-basement reflections at borehole depths. Synthetic reflectivity seismograms were computed using a Ricker wavelet and impedance profiles from borehole sonic logs. These seismograms show significant sub-basement amplitude peaks. A zero-offset vertical seismic profile, shot on E312, was processed to investigate the authenticity of these reflections and their relationship to borehole geology. A dual scheme of the median filtering and F–K dip filtering was used. Tests with synthetic seismograms indicate the approach is effective at reasonable SNR levels. Downgoing energy is clearly identified but negligible upgoing energy is visible over random noise. These results indicate that lava flows and igneous contacts in upper ocean crust have significant topography on lateral scales less than the Fresnel Zone (~300 m) due to igneous and tectonic processes.     

An inter-comparison of tidal solutions computed with a range of unstructured grid models of the Irish and Celtic Sea Regions

Three finite element codes, namely TELEMAC, ADCIRC and QUODDY, are used to compute the spatial distributions of the M₂, M₄ and M₆ components of the tide in the sea region off the west coast of Britain. This region is chosen because there is an accurate topographic dataset in the area and detailed open boundary M₂ tidal forcing for driving the model. In addition, accurate solutions (based upon comparisons with extensive observations) using uniform grid finite difference models forced with these open boundary data exist for comparison purposes. By using boundary forcing, bottom topography and bottom drag coefficients identical to those used in an earlier finite difference model, there is no danger of comparing finite element solutions for “untuned unoptimised solutions” with those from a “tuned optimised solution”. In addition, by placing the open boundary in all finite element calculations at the same location as that used in a previous finite difference model and using the same M₂ tidal boundary forcing and water depths, a like with like comparison of solutions derived with the various finite element models was possible. In addition, this open boundary was well removed from the shallow water region, namely the eastern Irish Sea where the higher harmonics were generated. Since these are not included in the open boundary, forcing their generation was determined by physical processes within the models. Consequently, an inter-comparison of these higher harmonics generated by the various finite element codes gives some indication of the degree of variability in the solution particularly in coastal regions from one finite element model to another. Initial calculations using high-resolution near-shore topography in the eastern Irish Sea and including “wetting and drying” showed that M₂ tidal amplitudes and phases in the region computed with TELEMAC were in good agreement with observations. The ADCIRC code gave amplitudes about 30 cm lower and phases about 8° higher. For the M₄ tide, in the eastern Irish Sea amplitudes computed with TELEMAC were about 4 cm higher than ADCIRC on average, with phase differences of order 5°. For the M₆ component, amplitudes and phases showed significant small-scale variability in the eastern Irish Sea, and no clear bias between the models could be found. Although setting a minimum water depth of 5 m in the near-shore region, hence removing wetting and drying, reduced the small-scale variability in the models, the differences in M₂ and M₄ tide between models remained. For M₆, a significant reduction in variability occurred in the eastern Irish Sea when a minimum 5-m water depth was specified. In this case, TELEMAC gave amplitudes that were 1 cm higher and phases 30° lower than ADCIRC on average. For QUODDY in the eastern Irish Sea, average M₂ tidal amplitudes were about 10 cm higher and phase 8° higher than those computed with TELEMAC. For M₄, amplitudes were approximately 2 cm higher with phases of order 15° higher in the northern part of the region and 15° lower in the southern part. For M₆ in the north of the region, amplitudes were 2 cm higher and about 2 cm lower in the south. Very rapid M₆ tidal-phase changes occurred in the near-shore regions. The lessons learned from this model inter-comparison study are summarised in the final section of the paper. In addition, the problems of performing a detailed model–model inter-comparison are discussed, as are the enormous difficulties of conducting a true model skill assessment that would require detailed measurements of tidal boundary forcing, near-shore topography and precise knowledge of bed types and bed forms. Such data are at present not available.     

Tectonics of southwestern Mexico,isotopic evidence,nuclear Central America,Late Cretaceous break up

In the paleogeographic reconstruction of Mexico and northern Central America, an ever-increasing amount of evidence shows that the entire region is a collage of suspect terranes transported from abroad, whose timing and sense of motion are now beginning to be understood. Among these, the Chortis block (nuclear Central America) and the Baja California Peninsula have been proposed as pieces of continent separated from the Pacific coast of southwestern Mexico, that have moved either southeastward by the Farallon plate or northwestward by the Kula plate. Previous studies mainly confined to the northern margin of the Chortis block, confirmed a left-lateral displacement of 130 km in Neogene time. Further studies made northwestward along the Mexican coast provided a better understanding of magmatic and metamorphic processes in the area, and suggested times of detachment increased to 30 Ma, 40 Ma, and 66 Ma. The pre-detachment westernmost position of the block has changed, depending on the model chosen, from Puerto Vallarta and beyond, to the current position. Here we show that the isotopic mineral ages from coastal granites along the coast from Puerto Vallarta, Jalisco (80 Ma) to Puerto Angel, Oaxaca (11 Ma) record systematic decrease of cooling ages from NW to SE. This pattern is interpreted to result from the progressive uplift of rocks exposed at the present-day coast in that direction, such uplift occurred in response to the development of the Middle America Trench at the newly formed continental margin when the Chortis block was sliding at an average rate of 1.5 cm/year in a sinistral sense to its present position. Our results also constrain the position of the Kula-Farallon spreading axis north of Puerto Vallarta. These observations led us to conclude that several indicators point to this time and region for the onset of strike-slip drifting of the Chortis block toward its current position. Here, we also present several view points in terms of other possilble interpretations to different tectonic, geologic and isotopic data sets published recently by different authors.     

鄂尔多斯盆地南部延长组富铀凝灰岩地球化学特征及形成机制

本文系统地研究了鄂尔多斯盆地南部延长组凝灰岩元素和同位素地球化学特征。结果表明：凝灰岩主量元素具有高K、高Al、Si中等至高、低Na的特征; REE总体特征为轻稀土富集、重稀土亏损,∑REE在4857～40212 μg/g 之间变化,Eu呈现出负异常,在034～082内变化,δCe范围在080～208之间; 微量元素中U含量在312～144 μg/g 之间,Ba、U、Th、Hf和Ce呈明显正异常,Nb、P、Ti和Rb呈现负异常。详细的分析表明：U的富集和一些微量元素如Ta、Dy、Lu等相关,Th与∑REE存在明显的正相关性,这些变化可能和盆地中铀矿的富集有关; 凝灰岩的硫同位素总体呈现深源特征。根据以上的研究对凝灰岩的形成原因及形成环境进行了探讨。鄂尔多斯盆地南部延长组凝灰岩来源于秦岭造山带火山作用,其中的铀元素富集是由于砂岩型铀矿中铀向凝灰岩迁移而被还原所致。本研究对盆地砂岩型铀矿的铀运移和富集机理认识具有一定指导意义。     

The Upper Middle Rhine Valley as a risk area

The Upper Middle Rhine Valley, granted the status of a World Heritage site, is well known for its unique inner narrow valley of Quaternary age with its historical legacy of numerous medieval castles and old towns. Less known is that this has always been a risk area of floods and gravitative mass movements. Up to the recent past, mainly ice floods caused enormous damage. The inhabitants of the valley were well aware that they lived in a risk area, but they had learned to handle the flood hazard. With the demise of ice floods over the last 40 years, due to climate change and because of the additional heating of the river water by power plants, the awareness of flood hazards has been much diminished, in contrast to that of potential damage by rockfalls and landslides which were also much feared in the past, though at the local level only. Still in the people’s memory is the Kaub catastrophe of March 10, 1876, when 28 persons were killed by a landslide. Nowadays, even minor rockfalls are a major threat, as they will affect the much-used traffic lines on both banks of the river, in particular the railroads. Therefore, since 2002, on behalf of German Rail (Deutsche Bahn, DB), all problematic slopes have been protected by costly steel-ring nets, although they are an aesthetic problem by UNESCO standards. The feeling of absolute safety created among the public is only subjective, though, as planners are well aware of. Moreover, the impact of modern climate change on slope stability is nearly unknown. Therefore, it is still necessary to develop a risk map for the narrow valley, with emphasis on gravitational hazards.