Removal of COD from Industrial Effluent Containing Indigo Dye Using Adsorption Method by Activated Carbon Cloth: Optimization,Kinetic, and Isotherm Studies

The pollution of underground and surface water streams is a tremendous environmental problem. Adsorption, in which activated carbon (AC) is used as an adsorbent, is one of efficient procedures to remove organic and inorganic pollutants from industrial wastewaters. Activated carbon fiber (ACF), a newly developed form of AC, has high adsorption rate and surface area and can be used for the treatment of industrial wastewaters. In this work, ACF was prepared by physicochemical activation method from kenaf and we studied its ability in the treatment of indigo‐containing wastewater produced from a dying factory. The filtered wastewater was treated via adsorption by ACF, and response surface experimental design method was used to study the effect of ACF dosage, contact time, temperature, and pH of the wastewater on the removal process. ACF dosage of 0.256 g, temperature of 12.5°C, pH 8.5, and contact time of 125 min were optimum treatment conditions. The adsorption process obeys pseudo‐second‐order kinetic and Freundlich isotherm models.     

Reduction of environmental pollution through optimization of energy use in cement industries

Industrial development has lead to higher energy consumption, emission of greenhouse gases, as well as air pollutants. Cement factories play an important role in over all greenhouse emissions. This study aims to investigate the role of Iranian cement industries and their contribution of greenhouse gases contribution. The measured emission factors for oil and fuel gas shows that carbon dioxide contribution from fuel oil based cement industries is almost 2.7 times higher than gas based cement factories. The strength, weakness, opportunity and threat technique analysis showed that the best strategy to combat greenhouse gases from Iranian cement factory is to implement energy efficiency measures. Further, strategic position and action evaluation matrix analysis indicates that Iranian cement industries fall within invasive category. Therefore, exploitation of opportunities must carefully be used. One of these opportunities is the utilization of financial assistance provided by clean development mechanism. The results show that replacement of ball mills with vertical roller mill can reduce the electricity consumption from 44.6 to 28 kWh/ton. As a result of such substitution about 720 million kWh/y of electricity would be saved (almost a power plant of 125 MW capacities). Though implementation of new mills may not be economic for the cement industries’ owner, but the overall gain for the government of Iran will be about US$ 304 million. If the duration of such efficiency measure is considered as about 12 y, then the overall CO₂ reduction/phase-out would be around 4.3 million tons.     

Development of new attenuation equation for subduction mechanisms in Malaysia water

The attenuation equation for far field earthquake is important because the earthquake occurring in neighboring countries can be felt in Malaysia. In this study, a new attenuation was generated using the regression method. It was developed to calculate the peak ground acceleration (PGA) onsite (offshore platform). The database consisting of more than 150 PGAs from 9 events of earthquakes recorded by the Seismology Station in Malaysia was used to develop the relationship. In addition, attenuation relationships for subduction mechanisms from previous researchers are then compared with the newly generated ones in this research. The new attenuation equation was also validated and used to calculate the acceleration for far field earthquake in a case study of offshore platform at a Terengganu seaside. The result of PGA from the new generated attenuation relationship was in a good match with previous attenuation equations.     

The plane symmetric vacuum solutions of modified field equations in metric f(R) gravity

The f(R) theories of gravity have been interested in recent years. A considerable amount of work has been devoted to the study of modified field equations with the assumption of constant Ricci scalar which may be zero or nonzero. In this paper, the exact vacuum solutions of plane symmetric spacetime are analyzed in f(R) theory of gravity. The modified field equations are studied not only for R=constant but also for general case R≠constant. In particular, we show that the Novotný-Horský and anti-de Sitter spacetimes are the exact solutions of the field equations with the non-zero constant Ricci scalar. Finally, the family of solutions with R≠constant is obtained explicitly which includes the Novotný-Horský, Kottler-Whittaker, Taub and conformally flat spacetimes.     

Earthquake response analysis considering non-proportional damping

Non-proportional damping may be defined as a form of linear viscous damping which introduces coupling between the undamped modal co-ordinate equations of motion. The standard mode superposition method of earthquake response analysis therefore cannot be employed with non-proportionally damped structures. In this paper, several methods for analysing the dynamic response of non-proportional damped structures are outlined. It is concluded that the most efficient procedure is to express the response in terms of a truncated set of undamped modal coordinates and to integrate directly the resulting coupled equations. The effectiveness of the method is demonstrated by a numerical example.     

Biomonitoring of Ni and V Contamination Using Oysters (Saccostrea cucullata) at Lengeh Port,Persian Gulf,Iran

Vanadium and nickel are two important indicators of oil pollution. Lengthy exposure to these elements causes serious harmful effects in human health, different harsh allergies being examples. The accumulation of two heavy metals (Ni and V) in sediment and the soft and hard tissues of Saccostrea cucullata were analyzed at three sampling sites along the coast of Lengeh Port, Persian Gulf. Results indicated at all the sampling sites; the Ni levels in soft tissues (STs) were higher than in the shells (SHs) and sediments, whereas the V levels were higher in the sediments. In addition, meaningful relationship (r = 0.65; p < 0.05) was observed across Ni levels in ST of S. cucullata and sediment, while for V concentrations a strong relationship (r = 0.83; p < 0.01) was found in SH of S. cucullata and sediment. This indicates that ST and SH of oyster can be considered as a biomonitoring agent for Ni and V levels, in coastal waters, respectively. The exposure of the consumer is compared directly to minimal risk level and provisional maximum tolerable daily intake. Result indicated that levels of Ni and V were within the safety limits for human consumption.     

Sediment yield and soil erosion assessment by using empirical models for Shazand watershed,a semi-arid area in center of Iran

Natural Hazards - In Kuwait, the transport sector is facing a daily traffic congestion pandemic. The traffic congestion is significantly influencing the economy and obstructing the development and...     

Removal of textile dyes from aqueous solution by conducting polymer modified clinoptilolite

In this work, clinoptilolite was modified with conducting polyaniline polymer and then the nanocomposite was used as an adsorbent for methyl orange (MO) as a model dye. Cations located in clinoptilolite structure like Na⁺, K⁺, Mg²⁺, Ca²⁺ were exchanged with anilinium cations and then the polymerization of anilinium cations in and outside of the clinoptilolite channels resulted in the formation of polyaniline/clinoptilolite nanocomposite. The resulted nanocomposite was used for the removal of MO from aqueous solution. The effect of various factors like contact time, concentration of dye as well as the amount of adsorbent on the removal efficiency of dye was investigated. The adsorption isotherms were investigated. It was found that the equilibrium adsorption data were well described by the Langmuir isotherm model. The kinetic studies indicated that the adsorption process was controlled by pseudo-second-order equation. High adsorption capacity and low contact time as well as the low cost of modified clinoptilolite proved that it is an efficient adsorbent for the removal of MO from aqueous solutions.