Tectono-geomorphic development of intra-continental Cenozoic depressions within Cretaceous rocks of the Interior Homocline,Central Arabia

Intra-continental depressions occurred in Central Arabia, within the evaporite-bearing Sulaiy Formation, and extends for over 550 km along N-S arcuate belt, passing through eastern Ar Riyadh, Saudi Arabia. They mark Jurassic/Cretaceous contact within the Interior Homocline of Central Arabia, accommodating Neogene and Quaternary deposits. Two en echelon major depressional areas were discovered, the northern major depressional area and the southern major depressional area. The first depressional area occurs between Al Artawiyah and Ad Dilam towns, following the arcuate Jurassic/Cretaceous contact. It contains five depressions: N-S Al Artwaiyah depression; NW-SE Ath Thumamah depression, northeast of Riyadh; NW-SE Jinadriyah depression, east of Riyadh; E-W Al Kharj depression; and N-S Ad Dilam depression. All five depressions seems to be formed by tectonic and subsequent geomorphic events, except for Al Artawiyah and Jinadriyah depression, which developed mainly by tectonic events. Southern major depressional area steps over to southwest of Ad Dilam, and occurs from Hawtat bani tamim to Layla towns. This Hawtah-Layla major depression trends N-S, and Cretaceous units strike NNE, which is a slightly oblique relationship, suggesting expression of deep-seated structures. Tectonic features were part of the Alpine-Himalayan orogeny, developing during Eocene. They followed by a geomorphic event (karsts and subsequent collapse) that took place during Mid Pleistocene. Ad Dilam depression is a surface expression of three oil and gas fields, while the southern major depression between Hawtat Bani Tamim and Layla towns is a surface expression of four oil and gas fields. Yet, other several depressional areas are also accommodating Quaternary desert sediments, and they contain economic resources, which therefore, worth further detailed studies.     

Regional modelling of rainfall-induced runoff using hydrological model by incorporating plant cover effects: case study in Kelantan,Malaysia

The objective of this paper is to develop a spatial temporal runoff modelling of local rainfall patterns effect on the plant cover hilly lands in Kelantan River Basin. Rainfall interception loss based on leaf area index, loss/infiltration on the ground surface, and runoff calculation were considered as the main plant cover effects on the runoff volume. In this regard, a hydrological and geotechnical grid-based regional model (integrated model) was performed using Microsoft Excel^® and GIS framework system for deterministic modelling of rainfall-induced runoff by incorporating plant cover effects. The infiltration process of the current model was integrated with the precipitation distribution method and rainfall interception approach while the runoff analysis of integrated model was employed based on loss/infiltration water on the ground surface with consideration of water interception loss by canopy and the remaining surface water. In the following, the spatial temporal analysis of rainfall-induced runoff was performed using 10 days of hourly rainfall events at the end of December 2014 in Kelantan River Basin. The corresponding changes in pressure head and consequent rate of infiltration were calculated during rainfall events. Subsequently, flood volume is computed using local rainfall patterns, along with water interception loss and the remaining surface water in the study area. The results showed the land cover changes caused significant differences in hydrological response to surface water. The increase in runoff volume of the Kelantan River Basin is as a function of deforestation and urbanization, especially converting the forest area to agricultural land (i.e. rubber and mixed agriculture).     

Socio-political and ecological stresses on traditional pastoral systems: A review

Journal of Geographical Sciences - Pastoralism is a viable socio-economic system-shaped by landless and agro-pastoral communities in many pastoral regions of the world. This system is mainly based...     

南海4种珊瑚附生可培养真菌多样性分析

本研究利用从南海采集的4种珊瑚分离附生真菌,并通过菌株的分类鉴定及系统发育分析获得珊瑚附生可培养真菌的多样性信息.选用酵母麦芽糖琼脂培养基(YM)、马铃薯葡萄糖琼脂培养基(PDA)、马丁氏培养基(Martin)、察氏琼脂培养基(CDA)和孟加拉红培养基(RBM)等5种培养基,采用平板涂布法培养分离附生真菌,基于ITS-rRNA基因序列对真菌菌株进行鉴定和系统发育分析.从4种珊瑚上共分离获得10个属的120株真菌,分别是:青霉属(Penicillum)56株、曲霉属(Aspergillus)25株、枝顶孢属(Acremonium)2株、枝孢属(Cladosporium)5株、毕赤酵母属(Meyerozyma)14株、隔孢伏革属(Peniophora)2株、拟茎点霉属(Phomopsis)1株、裂褶菌属(Schizophyllum)1株、梗孢酵母属(Sterigmatomyces)13株、篮状菌属(Talaromyces)1株.通过对不同珊瑚品种分离获得的附生真菌的比较,发现小叶鹿角珊瑚(Acropora microphthalma)和花鹿角珊瑚(Acropora floride)上分离到的菌株多样性最高,包含6属10种.进一步的分析发现不同珊瑚样品上真菌种类分布有较大差异,隔孢伏革属和裂褶菌属真菌均分离自小叶鹿角珊瑚,梗孢酵母属和篮状菌属均分离自角孔珊瑚(Goniopora sp.),扁脑珊瑚(Platygyra sp.)上则分离到拟茎点霉属.同时还发现不同培养基分离真菌的能力不同,YM培养基分离的菌株最多,CDA培养基分离真菌的多样性最多.以上的研究结果表明,南海珊瑚上存在大量且丰富的真菌资源,可以为后续生物活性物质的开发利用提供良好的菌种资源.     

Spatial variability of soil nutrients in Punta Fort William,Greenwich Island,maritime Antarctic

This study aims to report baseline soil nutrients, specifically the organic carbon, nitrogen and phosphorus profile, in soil samples collected from Puntta Fort William on Greenwich Island in maritime Antarctic. Samples were collected along two transect lines during the early summer of 2008. Ward＇s method of hierarchical agglomerative clustering was employed to group the sampling points based on their physico-chemical properties. In this context, the soil samples can be grouped into three major clus- ters： （1） Samples with intensive biological activities, （2） samples from the area recently exposed by glacial retreat and （3） samples from barren and dried areas. Nutrient contents in Punta Fort William are driven by the intensity of biological activities as well as melt water from the Qnito glacier.     

Effects of search parameters on kriged reserve estimates

Summary Reliable ore reserve estimates for deposits with highly skewed grade distributions are difficult tasks to perform. Although some recent geostatistical techniques are available to handle problems with these estimations, ordinary kriging or conventional interpolation methods are still widely used to estimate the ore reserves for such deposits. The estimation results can be very sensitive to the search parameters used during the interpolation of grades with these methods.This paper compares the ore reserve estimates from ordinary kriging using several cases in which certain search parameters are varied. The comparisons are extended to different mineralizations to show the changing effects of these parameters.     

Protected areas in Saudi Arabia: Sustainable use of natural resources

The present paper reviews the conservation movement in Saudi Arabia as measured against the established protected areas, as well as the basic philosophy regarding natural resource management. The degree of representation of the biophysical diversity of Saudi Arabia in the established protected areas is discussed by using three areas as case studies: Harrat Al-Harrah (lava field), Urug Bani Mu'arid (Cuesta and Sand), and Raydah Escarpment (High Mountain).     

Cadmium content, accumulation and toxicity in dog whelks collected around the Welsh coastline

The concentration of cadmium in sexually mature Nucella lapillus was investigated around the coast of Wales. Higher concentrations of cadmium were found in whelks located in the Bristol Channel compared with Cardigan Bay Nucella. Accumulation and toxicity of cadmium were investigated at 50–600 μg Cd l⁻¹ over a period of 21 days. At the lower concentrations of 50–100 μg Cd l⁻¹ all Nucella survived the 21 days of experimentation. The rate of cadmium uptake after exposure to cadmium was inconsistent and not related to the degree of site contamination. At all sites the concentration of cadmium in Nucella, after treatment with 50–600 μg Cd l⁻¹ for 21 days, was significantly different from controls, but after 7 days it varied with the site and cadmium concentration. Only samples collected at Fishguard, Dale, and Swansea survived 21 days at 600 μg Cd l⁻¹. Tissue cadmium concentrations did not significantly effect the whole body concentration of zinc.     

A New Approach for Border Detection of the Dumluca (Turkey) Iron Ore Area: Wavelet Cellular Neural Networks

Anomaly analysis is used for various geophysics applications such as determination of geophysical structure's location and border detections. Besides the classical geophysical techniques, artificial intelligence based image processing algorithms have been found attractive for geophysical anomaly analysis. Recently, cellular neural networks (CNN) have been applied to geophysical data and satisfactory results are reported. CNN provides fast and parallel computational capability for geophysical image processing applications due to its filtering structure. The behavior of CNN is defined by two template matrices that are adjusted by a properly supervised learning algorithm. After training stage for geophysical data, Bouguer anomaly maps can be processed and analyzed sequentially. In this paper, CNN learning and processing capability have been improved, combining Wavelet functions and backpropagation learning algorithms. The new architecture is denoted as Wavelet-Cellular Neural networks (Wave-CNN) and it is employed to analyze Bouguer anomaly maps which are important to extract useful information in geophysics. At first, Wave-CNN performance is tested on synthetic geophysical data, which are created by a computer environment. Then, Bouguer anomaly maps of the Dumluca iron ore field have been analyzed and results are reported in comparison to real drilling results.     

Use of a shared tuned mass damper (STMD) to reduce vibration and pounding in adjacent structures

The dynamic response of tall civil structures due to earthquakes is very important to civil engineers. Structures exposed to earthquakes experience vibrations that are detrimental to their structural components. Structural pounding is an additional problem that occurs when buildings experience earthquake excitation. This phenomena occurs when adjacent structures collide from their out‐of‐phase vibrations. Many energy dissipation devices are presently being used to reduce the system response. Tuned mass dampers (TMD) are commonly used to improve the response of structures. The stiffness and damping properties of the TMD are designed to be a function of the natural frequency of the building to which it is connected. This research involves attaching adjacent structures with a shared tuned mass damper (STMD) to reduce both the structures vibration and probability of pounding. Because the STMD is connected to both buildings, the problem of tuning the STMD stiffness and damping parameters becomes an issue. A design procedure utilizing a performance function is used to obtain the STMD parameters to result in the best overall system response. Copyright © 2001 John Wiley & Sons, Ltd.