Paleoceanographic evolution of the SW Svalbard margin (76°N) since 20,000 C yr BP

Two cores from the southwestern shelf and slope of Storfjorden, Svalbard, taken at 389 m and 1485 m water depth have been analyzed for benthic and planktic foraminifera, oxygen isotopes, and ice-rafted debris. The results show that over the last 20,000 yr, Atlantic water has been continuously present on the southwestern Svalbard shelf. However, from 15,000 to 10,000 ¹⁴C yr BP, comprising the Heinrich event H1 interval, the Bølling-Allerød interstades and the Younger Dryas stade, it flowed as a subsurface water mass below a layer of polar surface water. In the benthic environment, the shift to interglacial conditions occurred at 10,000 ¹⁴C yr BP. Due to the presence of a thin upper layer of polar water, surface conditions remained cold until ca. 9000 ¹⁴C yr BP, when the warm Atlantic water finally appeared at the surface. Neither extensive sea ice cover nor large inputs of meltwater stopped the inflow of Atlantic water. Its warm core was merely submerged below the cold polar surface water.     

Geochemistry of Flooded Underground Mine Workings Influenced by Bacterial Sulfate Reduction

Unlike the majority of the water in the flooded mine complex of Butte Montana, which includes the highly acidic Berkeley pit lake, groundwater in the flooded West Camp underground mine workings has a circum-neutral pH and contains at least 8 μM aqueous sulfide. This article examines the geochemistry and stable isotope composition of this unusual H₂S-rich mine water, and also discusses problems related to the colorimetric analysis of sulfide in waters that contain FeS_(aq) cluster compounds. The West Camp mine pool is maintained at a constant elevation by continuous pumping, with discharge water that contains elevated Mn (90 μM), Fe (16 μM), and As (1.3 μM) but otherwise low metal concentrations. Dissolved inorganic carbon in the mine water is in chemical and isotopic equilibrium with rhodochrosite in the mineralized veins. The mine water is under-saturated with mackinawite and amorphous FeS, but is supersaturated with Cu- and Zn-sulfides. However, voltammetry studies show that much of the dissolved sulfide and ferrous iron are present as FeS_(aq) cluster molecules: as a result, the free concentration of the West Camp water is poorly constrained. Concentrations of dissolved sulfide determined by colorimetry were lower than gravimetric assays obtained by AgNO₃ addition, implying that the FeS_(aq) clusters are not completely extracted by the Methylene Blue reagent. In contrast, the clusters are quantitatively extracted as Ag₂S after addition of AgNO₃. Isotopic analysis of co-existing aqueous sulfide and sulfate confirms that the sulfide was produced by sulfate-reducing bacteria (SRB). The H₂S-rich mine water is not confined to the immediate vicinity of the extraction well, but is also present in flooded mine shafts up to 3 km away, and in samples bailed from mine shafts at depths up to 300 m below static water level. This illustrates that SRB are well established throughout the southwestern portion of the extensive (>15 km³) Butte flooded mine complex.     

Hydrogeology of the Winnipeg Formation in Manitoba, Canada

The Winnipeg Formation is the basal sedimentary unit throughout much of southern and central Manitoba, Canada, where it forms a regional aquifer over most of its extent. This aquifer is an important source of water in southeastern Manitoba and in Manitoba’s Interlake area, but in most other areas, groundwater within the aquifer is saline. Chemical and isotopic evidence indicate the presence of groundwaters of three different origins: (1) basin brines; (2) modern meteoric recharge; and (3) subglacial recharge that occurred during the late Pleistocene. Hydraulic head and sedimentary facies distributions indicate that the flow system in parts of the area is not in a state of equilibrium and saline waters will encroach on areas currently occupied by freshwater in some areas, while in other areas, freshwater will replace saline water. These features must be considered in groundwater resource management, as groundwater withdrawals will likely hasten these processes.

---

Resumen La Formación Winnipeg es la unidad sedimentaria basal en la mayor parte de Manitoba central, Canadá, donde forma un acuífero regional en la mayor parte de su extensión. Este acuífero es una fuente importante de agua en el Sureste de Manitoba y el área de entrelagos de Manitoba, pero en la mayoría de las otras zonas del acuífero, el agua es salina. Las evidencias químicas e isotópicas indican que existen aguas subterráneas de tres orígenes diferentes: (1) salmueras de cuenca; (2) recarga meteórica actual; y (3) recarga subglacial ocurrida durante el Pleistoceno Superior. Los niveles piezométricos y la distribución de las facies sedimentarias indican que el sistema de flujo no se encuentra en estado de equilibrio en parte del área y las aguas salinas irán invadiendo áreas actualmente ocupadas con aguas dulces, mientras que en otras zonas el agua dulce está reemplazando al agua salina. Estos hechos deben ser considerados en la gestión de las aguas subterráneas como recurso, ya que las extracciones de agua acelerarán probablemente estos procesos.

---

Résumé La Formation de Winnipeg est l’unité sédimentaire de base sur la plus grande partie du Sud et du centre du Manitoba au Canada, où elle forme un aquifère régional sur pratiquement toute son extension. Cet aquifère représente une ressource en eau importante dans le Sud-Est du Manitoba et dans les zones d’entre les lacs, mais salée dans la plus part des autres zones. Les indications isotopiques et chimiques permettent de distinguer trois différentes origines des eaux souterraines: (1) les saumures de bassin; (2) la recharge météoritique moderne; (3) la recharge sub-glaciaire qui est apparue durant le Pléistocène récent. Les charges hydrauliques et la distribution des faciès sédimentaires indiquent que le système d’écoulement dans certaines zones n’est pas dans un état d’équilibre et que les eaux salées empièteront sur des zones d’eau douce, tandis que dans d’autres zones l’eau douce remplacera les eaux salées. Ces aspects doivent être considérés dans la gestion des ressources en eau souterraine, car le prélèvement des eaux souterraines pourrait accentuer ces processus.

     

Geochemistry, Geochronology and Isotopic Evolution of the Chewore-Rufunsa Terrane, Southern Irumide Belt: a Mesoproterozoic Continental Margin Arc

The southern Irumide Belt (SIB) is an ENE–WSW-trending,late Mesoproterozoic orogenic belt located between the Congo–Tanzania–Bangweulu(CTB) and Kalahari cratons in central southern Africa. It isseparated from the late Mesoproterozoic Irumide Belt (IB) tothe north by Permo-Triassic graben, raising the possibilitythat the younger rifts reactivated a suture between the twobelts that has been rendered cryptic as a result of youngerKaroo cover. Both belts are dominated by calc-alkaline gneisses,but in addition the SIB contains abundant metavolcanic and metasedimentaryrocks. In this study we present detailed geochemical, isotopicand geochronological data for volcanic and plutonic lithologiesfrom the southernmost part of the SIB, the Chewore–RufunsaTerrane. This terrane comprises a wide variety of supracrustalto mid-crustal rocks that have major- and trace-element compositionssimilar to magmas formed in present-day subduction zones. Chondrite-normalizedrare earth element (REE) profiles and whole-rock Sm–Ndisotope compositions indicate that the parental supra-subductionmelts interacted with, and were contaminated by sialic continentalcrust, implying a continental-margin-arc setting. Secondaryionization mass spectrometry dating of magmatic zircon has yieldedcrystallization ages between c. 1095 and 1040 Ma, similar toelsewhere in the SIB. U–Pb dating and in situ Lu–Hfisotopic analyses of abundant xenocrystic zircon extracted fromthe late Mesoproterozoic granitoids indicate that the contaminantcontinental basement was principally Palaeoproterozoic in ageand had a juvenile isotopic signature at the time of its formation.These data are in contrast to those for the IB, which is characterizedby younger, c. 1020 Ma, calc-alkaline gneisses that formed bythe direct recycling of Archaean crust without significant additionof any juvenile material. We suggest that the SIB developedby the subduction of oceanic crust under the margin of an unnamedcontinental mass until ocean closure at c. 1040 Ma. Subsequentcollision between the SIB and the CTB margin led to the cessationof magmatism in the SIB and the initiation of compression andcrustal melting in the IB. KEY WORDS: geochemistry; Mesoproterozoic; SHRIMP zircon U–Pb dating; Sm–Nd isotopes; Southern Irumide Belt     

Reduction in Exhaust Gas Temperature of Biodiesel Fueled Engine by Exhaust Gas Recirculation

Biodiesel is a renewable alternative fuel that can be used as substitute for mineral diesel. The use of biodiesel in diesel engines reduces all of the exhaust emissions expect NO_x. The higher temperature in the combustion chamber increases the NO_x emissions. The recirculation of a small percentage of cooled exhaust gases into the combustion chamber through the intake manifold reduces the in‐cylinder temperature. Moreover, the cooling of exhaust gases before mixing with fresh air introduced to the engine does not affect its volumetric efficiency but it absorbs the heat of combustion. This leads to a reduction in NO_x emissions and improves the engine brake thermal efficiency. This paper describes the investigation of the performance and emission characteristics of a biodiesel‐fueled, naturally aspirated, single cylinder diesel engine with cooled exhaust gas recirculation.     

Mt. Pelée, martinique: may 8 and 20, 1902, pyroclastic flows and surges

The distribution, stratigraphic relationships and fragmental components of the May 8 and 20, 1902, pyroclastic flows from Mt. Pelée, Martinique, together with eyewitness accounts, suggest the following explanation for those eruptions. The eruptions were vertically directed magmatic (perhaps initiated phreatically), and contained abundant juvenile lithics from congealed magma of the dome and neck. This resulted in a two-part eruption column having (1) a dense, lithic-charged part which collapsed into the crater and flowed out of a pre-existing notch in its side, giving rise to pyrochlastic flows, and (2) a magmatically derived column containing gases, juvenile vitric material and crystals which largely by-passed the neck and dome and escaped into the atmosphere. All of the energy of the flows was apparently focused through the notch. They emerged fully turbulent and flowed down Rivière Blanche. Gravity segregation of large and abundant fragments soon resulted in a dense, high-concentration, poorly fluidized block-and-ash flow confined to the valley, leaving above a fully turbulent, high-energy ash-cloud surge. As the ash-cloud surge moved down the mountain, it continued to expand outward. The process of gravity segregation continued as the ash-cloud surge expanded, resulting in secondary block-and-ash underflows. Toward St. Pierre, the secondary block-and-ash flows developed on a gently sloping upland surface 100 m or more above the valley of Rivière Blanche. The turbulent, fragment-depleted surges above the secondary block-and-ash flows maintained sufficient energy to devastate the landscape outward to about 3000 m, including St. Pierre. The surges refracted around obstacles and in one place, moved up a small valley in a direction opposite to the main flows.     

Modeling patterns of coral bleaching at a remote Central Pacific atoll

A mild bleaching event (9.2% prevalence) at Palmyra Atoll occurred in response to the 2009 ENSO, when mean water temperature reached 29.8-30.1 °C. Prevalence among both abundant and sparse taxa varied with no clear pattern in susceptibility relating to coral morphology. Seven taxon-specific models showed that turbidity exacerbated while prior exposure to higher background temperatures alleviated bleaching, with these predictors explaining an average 16.3% and 11.5% variation in prevalence patterns, respectively. Positive associations occurred between bleaching prevalence and both immediate temperature during the bleaching event (average 8.4% variation explained) and increased sand cover (average 3.7%). Despite these associations, mean unexplained variation in prevalence equalled 59%. Lower bleaching prevalence in areas experiencing higher background temperatures suggests acclimation to temperature stress among several coral genera, while WWII modifications may still be impacting the reefs via shoreline sediment re-distribution and increased turbidity, exacerbating coral bleaching susceptibility during periods of high temperature stress.     

Interpreting a Pumping Test Influenced by Another Well in an Anisotropic Aquifer

In confined aquifers the influence of neighboring active wells is often neglected when interpreting a pumping test. This can, however, lead to an erroneous interpretation of the pumping test data. This article presents simple methods to evaluate the transmissivity tensor and storativity of an anisotropic confined aquifer when there is an interfering well in the neighborhood of the tested well. Two methods have been developed depending on whether the tested well or the interfering well is the first in operation. These new methods yield better estimates of the hydraulic parameters than when the influence of the interfering well is neglected. These methods have then been used on data obtained from numerical models with an interfering well and the results have been compared to an analytical method that neglects the influence of the interfering well. The methods require knowledge of the pumping rate of the interfering well and the time elapsed since the pumping started in each well. If the interfering well started pumping before the tested well, the method does not require knowledge of the aquifer piezometric level at the beginning of the test, which is often unknown in this case. As for the method without interference, at least three monitoring wells (MWs) are needed, the position of which influences the accuracy of the estimated parameters. Some recommendations concerning MWs position have been given to get more accurate results according to the sought parameter.     

Particle fabric in a small, type-2 ignimbrite flow unit (Laacher See, Germany) and implications for emplacement dynamics

 Ignimbrites of the 13-ka Upper Laacher See Tephra were deposited from small, highly concentrated, moderately fluidized pyroclastic flows. Their unconsolidated nature, and the prominence of accidental Devonian slate fragments, make these ignimbrites ideal for clast fabric studies. The upper flow unit of ignimbrite M14 has characteristics typical of a type-2 ignimbrite. Layer 2a and the lower part of layer 2b of the flow unit have strong, upstream-inclined a[p] fabrics (a[p] means long particle axes parallel to flow direction). Only clasts with a/b axial ratios of 2.5 or greater preserve good a[p] fabrics, whereas the a–b planes of flat fragments dip upstream irrespective of axial ratio. The a-axis fabric becomes weaker, flatter, and more girdle-like in the upper half of layer 2b. At one locality the a-axis fabric appears to rotate 40° up through the flow unit, suggesting either shear decoupling of different levels in the moving flow or unsteadiness effects in a flow depositing progressively at its base. The existence of similarly strong a[p] fabrics in layer 2a and the lower half of layer 2b appears inconsistent with the common interpretation that ignimbrite flow units are emplaced as a plug of essentially non-shearing material (layer 2b) on a thin shear layer (layer 2a), and that the entire flow freezes en masse to form the deposit. The data suggest that, if the flow froze en masse, it was shearing pervasively through at least half its thickness. Another possibility is that the flow unit aggraded progressively from the base up, and that the fabrics record the integrated history of shear directions and intensities immediately above the bed throughout the duration of deposition. Received: 13 February 1997 / Accepted: 4 April 1998     

Mathematical expressions used in amino acid racemisation geochronology—A review

A variety of mathematical expressions that describe changes over time (t) in the extent of amino acid racemisation (AAR, expressed as the ratio of d- to l-amino acid isomers or epimers) have been used in Quaternary geochronology. The integrated rate equation was first used to estimate fossil age from D/L but its geochronological utility is disadvantaged by uncertainties regarding the conformity of AAR in fossil protein to apparent reversible first-order kinetics for the entire reaction history. ‘Non-linear’ models have subsequently been used to relate D/L to t. The logarithmic equation successfully applied to Atlantic Coastal Plain research has not achieved widespread application, perhaps due to the regional calibration required if sensitivity to temperature is to be modelled, or the difficulties encountered when extending the model to include fossils with D/L<0.1. Success producing a linear correlation between D/L transformed with a power function and t has seen this approach emerge as one of the most commonly applied in AAR geochronology in recent years. Like parabola curve fitting, which has been applied to trends in D/L versus t in a variety of fossils and geographic settings, power transformations may not be suitable for geochronological modelling during the latter stages of amino acid diagenesis. Several studies have demonstrated the utility of simple and contingent linear equations for relating D/L to t. Future research should aim to reduce reliance on independent calibration and explore the geochronological benefits of AAR in pools other than the total hydrolysable amino acids.