Movements,failure and climatic control of the Veslemannen rockslide,Western Norway

On September 5, 2019, the Veslemannen unstable rock slope (54,000 m³) in Romsdalen, Western Norway, failed catastrophically after 5 years of continuous monitoring. During this period, the rock slope weakened while the precursor movements increased progressively, in particular from 2017. Measured displacement prior to the failure was around 19 m in the upper parts of the instability and 4–5 m in the toe area. The pre-failure movements were usually associated with precipitation events, where peak velocities occurred 2–12 h after maximum precipitation. This indicates that the pore-water pressure in the sliding zones had a large influence on the slope stability. The sensitivity to rainfall increased greatly from spring to autumn suggesting a thermal control on the pore-water pressure. Transient modelling of temperatures suggests near permafrost conditions, and deep seasonal frost was certainly present. We propose that a frozen surface layer prevented water percolation to the sliding zone during spring snowmelt and early summer rainfalls. A transition from possible permafrost to a seasonal frost setting of the landslide body after 2000 was modelled, which may have affected the slope stability. Repeated rapid accelerations during late summers and autumns caused a total of 16 events of the red (high) hazard level and evacuation of the hazard zone. Threshold values for velocity were used in the risk management when increasing or decreasing hazard levels. The inverse velocity method was initially of little value. However, in the final phase before the failure, the inverse velocity method was useful for forecasting the time of failure. Risk communication was important for maintaining public trust in early-warning systems, and especially critical is the communication of the difference between issuing the red hazard level and predicting a landslide.

     

Dehydration of metapelites during high‐P metamorphism: The coupling between fluid sources and fluid sinks

Polymetamorphic metapelites and embedded eclogites share a complex, episodic interplay of dehydration and fluid infiltration at the eclogite type‐locality (Saualpe–Koralpe, Eastern Alps, Austria). The metapelites inherited a fluid content (i.e. mineral‐bound OH expressed in terms of mol.% H₂O) of ～6–7 mol.% H₂O from high‐T–low‐P metamorphism experienced during the Permian. At or near P_max of the subsequent Eoalpine event (～20 kbar and 680^°C), the breakdown of paragonite to Na‐rich clinopyroxene and kyanite in metapelites released a discrete pulse of hydrous fluid. Prior to the dehydration event, the rocks were largely fluid absent, allowing only limited re‐equilibration during the prograde Eoalpine evolution. Similarly, Permian‐aged gabbros have persisted metastably due to the absence of a catalyst prior to fluid‐induced re‐equilibration. The fluid triggered partial to complete eclogitization along a fluid infiltration front partially preserved in metagabbro. Near‐isothermal decompression to ～7.5–10 kbar and 670–690°C took place under fluid‐absent conditions. After decompression, a second breakdown of phengitic white mica and garnet produced muscovite, biotite, plagioclase and ～0.1–0.7 mol.% H₂O that enhanced extensive fluid‐aided re‐equilibration of the metapelites. Potential relicts of high‐P assemblages were largely obliterated and replaced by the recurrent amphibolite facies assemblage garnet+biotite+staurolite+kyanite+muscovite+plagioclase+ilmenite+quartz. The hydrous fluid originating from the metapelites infiltrated the embedded eclogites at these P–T conditions and induced the local breakdown of the peak assemblage omphacite and garnet to fine‐grained symplectites of diopside and plagioclase. Further fluid infiltration led to the formation of hornblende–quartz poikiloblasts at the expense of the symplectites. The metapelites re‐equilibrated until the growth of retrograde staurolite consumed any remaining free fluid, thereby terminating the process. Further re‐equilibration is inhibited by both the lack of a catalytic fluid and H₂O as a reactant essential for rehydration reactions. The interplay between fluid sources and fluid sinks describes a closed cycle for the rocks at the eclogite type‐locality. Final, near‐isobaric cooling is indicated by a slight increase of X_Fe in garnet rims. Post‐decompression dehydration and fluid‐aided re‐equilibration arrested by the introduction of staurolite might explain the apparently homogeneous retrogression conditions as well as the notorious absence of diagnostic high‐P assemblages in metapelites at the eclogite type‐locality.     

Interrelations of mesoscopic structures and strain across a small regional fold,Virginia Appalachians

Small regional folds, such as the Clover Hollow anticline of the Narrows thrust-sheet in southwest Virginia, U.S.A., are considered to be large buckle folds expressing lateral shortening above a subsurface décollement. Cleavage, mesoscopic and regional folds, and contraction faults have developed in these rocks under anchimetamorphic conditions, in a single, protracted deformation during thrust-sheet emplacement. The contraction faults dominate the structure at all scales. Three fault associations (isolated contraction faults, contraction faults in series and complex fault zones with intense folding) determine the pattern and intensity of local structures. Regional displacement transfer of strain along and across faults has produced local variations in structural style. Duplex-like systems of second-order faults terminate laterally into zones of intense folding and third-order faulting. Fold tightness, cleavage intensity, strain magnitude and total longitudinal strain (ε_T) are maximum in these regions. Contraction faults in this thrust-sheet have propagated along zones of high strain rate associated with mesoscopic folding and intense cleavage. Regional hinge migration, and greater structural complexity along the southeast limb of the Clover Hollow anticline, are considered to be due to emplacement of the adjacent thrust-sheet.     

The surface archaeological record in arid Australia: Geomorphic controls on preservation,exposure, and visibility

The conventional approach to assessing the archaeological record in most parts of the world involves a combination of excavation of stratified deposits and extensive survey of surface deposits. Although widely applied in Australia, in both research‐based and management archaeology, the method does not conform well to the nature of the surface archaeological record here. Over much of semi‐arid and arid Australia, archaeological “sites” are, in fact, accretion phenomena that are not easily interpreted as the outcome of short‐term behavioral events. Using results from twelve years of geoarchaeological research in western New South Wales, we demonstrate that there is considerable variability in landsurface age, and hence the “availability” of archaeological surfaces, over relatively short distances. Therefore, it cannot be assumed that stone artifact deposits, for example, that appear to be similar in character are of similar age. Data are also presented that demonstrate that the presence of artifacts on the surface, their apparent absence in sediments buried beneath the surface, and the apparent recent ubiquity of the archaeological record are all a function of geomorphic processes that, at the same time, expose some artifact deposits at the surface and erode and bury others amid large volumes of sediment. Interpreting the surface artifact record within a spatial and temporal geomorphic framework is crucial to understanding the past human behavior that the artifact deposits represent. © 2009 Wiley Periodicals, Inc.     

Radiocarbon analysis of halophilic microbial lipids from an Australian salt lake

Assigning accurate dates to hypersaline sediments opens important terrestrial records of local and regional paleoecologies and paleoclimatology. However, as of yet no conventional method of dating hypersaline systems has been widely adopted. Biomarker, mineralogical, and radiocarbon analyses of sediments and organic extracts from a shallow (13 cm) core from a hypersaline playa, Lake Tyrrell, southeastern Australia, produce a coherent age-depth curve beginning with modern microbial mats and extending to ~ 7500 cal yr BP. These analyses are furthermore used to identify and constrain the timing of the most recent change in hydrological regime at Lake Tyrrell, a shift from a clay deposit to the precipitation of evaporitic sands occurring at some time between ~ 4500 and 7000 yr. These analyses show the potential for widespread dating of hypersaline systems integrating the biomarker approach, reinforce the value of the radiocarbon content of biomarkers in understanding the flow of carbon in modern ecologies, and validate the temporal dimension of data provided by biomarkers when dating late Quaternary sediments.     

Paragenesis of sodic pyroxene-bearing quartz schists: implications for the P-T history of the Sanbagawa belt

Sodic pyroxene (jadeite content X _jd=0.1–0.3) occurs locally as small inclusions within, albite porphyroblasts and in the matrix of hematite-bearing quartz schists in the Sanbagawa (Sambagawa) metamorphic belt, central Shikoku, Japan. The sodic, pyroxene-bearing samples are characteristically free from chlorite and their typical mineral assemblage is sodic pyroxene+subcalcic (or sodic) amphibole+phengitic mica+albite+quartz+hematite+titanite±epidote. Spessartine-rich garnet occurs in Mn-rich samples. Sodic pyroxene in epidote-bearing samples tends to be poorer in acmite content (average X _Acm=0.26–0.50) than that in the epidote-free samples (X _Acm=0.45–0.47). X _Jd shows no systematic relationship to metamorphic grade, and is different among the three sampling regions [Saruta-gawa, Asemi-gawa and Bessi (Besshi)]. The average X _Jd of the Saruta-gawa samples (0.21–0.29) is higher than that of the Asemi-gawa (0.13–0.17) and Bessi (0.14–0.23). The P-T conditions of the Asemi-gawa and Bessi regions are estimated at 5.5–6.5 kbar, >360°C in the chlorite zone, 7–8.5 kbar, 440±15°C in the garnet zone and 8–9.5 kbar, 520±25°C in the albite-biotite zone. Metamorphic pressure of the Saruta-gawa region is systematically 1–1.5 kbar higher than that of the Asemi-gawa and Bessi regions, and materials of the Saruta-gawa region have been subducted to a level 3–5 km deeper than materials that underwent metamorphism at equivalent temperatures and are now exposed in the Asemi-gawa and Bessi regions. Pressure slightly increases toward the north (structurally high levels) through the Sanbagawa belt of central shikoku. Two types of zonal structure were observed in relatively coarse-grained sodic pyroxenes in the matrix. One type is characterized by increasing X _Jd from core to rim, the other type by decreasing X _Jd from core to rim. Both types of zoned pyroxenes show an increase in X _{Fe 2+}[=Fe²⁺/(Fe²⁺+Mg)] from core to rim. The first type of zoning was observed in a sample from the chlorite zone of lowest grade, whereas the latter occurs in the garnet and albite-biotite zones of higher grade. The contrast in zonal structure implies that dP/dT during prograde metamorphism decreased with increasing metamorphic grade and may have been negative in some samples from the higher-grade zones. The estimated dP/dT of the prograde stage of the chlorite zone is 3.2 kbar/100°C, and that of the garnet and albite-biotite zones is -1.8 to 0.9 kbar/100°C. The variation of dP/dT at shallow and deep levels of a subduction system probably reflects the difference of heating duration and/or change in thermal gradient of the subduction zone by continuous cooling of the surrounding mantle.     

Relations between denudation,glaciation, and sediment deposition: implications from the Plio‐Pleistocene Central Alps

Despite abundant data on the early evolution of the Central Alps, the latest stage exhumation history, potentially related to relief formation, is still poorly constrained. We aim for a better understanding of the relation between glaciation, erosion and sediment deposition. Addressing both topics, we analysed late Pliocene to recent deposits from the Upper Rhine Graben and two modern river sands by apatite fission‐track and (U‐Th‐Sm)/He thermochronology. From the observed age patterns we extracted the sediment provenance and paleo‐erosion history of the Alpine‐derived detritus. Due to their pollen and fossil record, the Rhine Graben deposits also provide information on climatic evolution, so that the erosion history can be related to glacial evolution during the Plio‐Pleistocene. Our data show that Rhine Graben deposits were derived from Variscan basement, Hegau volcanics, Swiss Molasse Basin, and the Central Alps. The relations between glaciation, Alpine erosion, and thermochronological age signals in sedimentary rocks are more complex than assumed. The first Alpine glaciation during the early Pleistocene did not disturb the long‐term exhumational equilibrium of the Alps. Recent findings indicate that main Alpine glaciation occurred at ca. 1 Ma. If true, then main Alpine glaciation was coeval with an apparent decrease of hinterland erosion rates, contrary to the expected trend. We suggest that glaciers effectively sealed the landscape, thus reducing the surface exposed to erosion and shifting the area of main erosion north toward the Molasse basin, causing sediment recycling. At around 0.4 Ma, erosion rates increased again, which seems to be a delayed response to main glaciation. The present‐day erosion regime seems to be dominated by mass‐wasting processes. Generally, glacial erosion rates did not exceed the pre‐glacial long‐term erosion rates of the Central Alps.     

Tellurantimony in Romania: first occurrences in Europe

Summary Tellurantimony, Sb₂Te₃ has been recorded for the first Lime in Europe. It occurs in the epithermal precious metal deposits of western Romania: Nagyag (now Sacaramb), Stanija, and Magura-Hondal. The optical properties, chemical composition, and mineral associations of the tellurantimony are described. Significant contents of Pb, Au, Ag, and As have been noted, and these seem to be related to the specific occurrence and association. The tellurantimony-bearing assemblages probably formed under conditions of highf _Te2 and mean to lowf _S2.

---

Tellurantimon in Rumänien: Das erste Vorkommen in Europa

Zusammenfassung Zum ersten Mal wurde in Europa Tellurantimon (Sb₂Te₃) gefunden. Es tritt in epithermalen Lagerstätten von Edelmetallen in W-Rumänien auf. Nagyag (jetzt Sacaramb), Stanija und Magura-Hondol. Hier werden die optischen Eigenschaften, die chemische Zusammensetzung und die Mineralvergesellschaftungen von Tellurantimon beschrieben. Deutliche Gehalte an Pb, Au, Ag und As scheinen in Zusammenhang mit der Besonderheit dieser Vorkommen und dieser Vergesellschaftung zu stehen. Die Tellurantimonführenden Zusammensetzungen wurden wahrscheinlich unter hoherf _Te2 und niedriger is mittlererf _s2 gebildet.

     

Green hope or greenwash? The actions of the European Union at the World Summit on sustainable development

This article examines whether the European Union (EU) could be seen as a normative power at the recent World Summit on Sustainable Development. We explain how the EU operationalised its commitment to the concept of sustainable development before highlighting the impact the EU had on the final summit outcomes. It shows that although in many areas the EU was able to offer leadership, internal policy coherence prevented it fully being able to develop that role and thus fully promoting the norm of sustainable development.