Andamento diurno,stagionale ed annuo della visbillità nel Golfo di Trieste

Riassunto Dalle osservazioni di visibilità verso il mare, eseguite giornalmente a Trieste alle ore 8, 14 e 19, nel ventennio 1931–1950, si deducono le medie mensili, stagionali e annue. La visibilità risulta massima alle ore 14 e nei mesi estivi. Il valore medio annuo è 6.5 del codice internazionale, la visibilità è di 15.000 m ed è classificata mediocre-buona. Nel ventennio l'andamento medio annuo risulta leggermente crescente.

---

Summary From the visibility-observations towards the sea, effectuated every day at 8^h, 14^h and 19^h, during the period of twenty years (1931–1950), the monthly and annual mean values are calculated. The visibility results maximum at 14^h of the summer months. The mean annual value is 6.5 of the International Codex, the visibility is 15.000 m and it is classified middle-good. In the twenty years 1931–1950, the mean annual going results lightly increasing.

     

Sediment geochemistry of the urban Lake Paulo Gorski

The objective of this study was to evaluate the concentration and distribution of heavy metals in the sediments of Paulo Gorski Lake, as well as the metals’ bioavailability and potential ecological risk, and to define the anthropogenic and natural heavy metal contributions to the lake. The chemical elements calcium (Ca), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), potassium (K), magnesium (Mg), manganese (Mn), sodium (Na), nickel (Ni), lead (Pb), and zinc (Zn) were quantified by flame atomic absorption spectrophotometry with two extraction methods to quantify the bioavailable and non-bioavailable fractions. The data were evaluated using multivariate statistics and sediment quality indices. All sediment collection points (S1, S2, S3, S4 and S5) are different in terms of the concentration of heavy metals, except for S4 and S5, which were statistically equal. The bioavailable fraction of the elements in the sediment follows the sequence Pb>Cu>Mn>Zn>Ni>Cr>phosphorus (P) for all points. The elements Co, Cr, Pb, and Zn showed moderate to considerable contamination at all points. Only points S3 and S5 had moderate ecological risk. Urbanization has been affecting Paulo Gorski Lake via the input of chemical elements, especially Co and Pb. The points most affected by heavy metal contamination are S3 and S5 when the sedimentological sensitivity factor is considered. The lake has high hydrodynamics, causing some of the contaminants that enter the system to leave it, leading to potential negative impacts downstream.     

Constraining the pass-band of future space-based coronagraphs for observations of solar eruptions in the FeXIV 530.3 nm “green line”

Observations of the solar corona in the FeXIV 530.3 nm “green line” have been very important in the past, and are planned for future coronagraphs on-board forthcoming space missions such as PROBA-3 and Aditya. For these instruments, a very important parameter to be optimized is the spectral width of the band-pass filter to be centred over the “green line”. Focusing on solar eruptions, motions occurring along the line of sight will Doppler shift the line profiles producing an emission that will partially fall out of the narrower pass-band, while broader pass-band will provide observations with reduced spectral purity. To address these issues, we performed numerical (MHD) simulation of CME emission in the “green line” and produced synthetic images assuming 4 different widths of the pass-band (Δλ = 20 Å, 10 Å, 5 Å, and 2 Å). It turns out that, as expected, during solar eruptions a significant fraction of “green line” emission will be lost using narrower filters; on the other hand these images will have a higher spectral purity and will contain emission coming from parcels of plasma expanding only along the plane of the sky. This will provide a better definition of single filamentary features and will help isolating single slices of plasma through the eruption, thus reducing the problem of superposition of different features along the line of sight and helping physical interpretation of limb events. For these reasons, we suggest to use narrower band passes (Δλ ≤ 2 Å) for the observations of solar eruptions with future coronagraphs.     

Cryptic metasomatic agent measured in situ in Variscan mantle rocks: Melt inclusions in garnet of eclogite,Granulitgebirge, Germany

Garnet of eclogite (formerly termed garnet clinopyroxenite) hosted in lenses of orogenic garnet peridotite from the Granulitgebirge, NW Bohemian Massif, contains unique inclusions of granitic melt, now either glassy or crystallized. Analysed glasses and re-homogenized inclusions are hydrous, peraluminous, and enriched in highly incompatible elements characteristic of the continental crust such as Cs, Li, B, Pb, Rb, Th, and U. The original melt thus represents a pristine, chemically evolved metasomatic agent, which infiltrated the mantle via deep continental subduction during the Variscan orogeny. The bulk chemical composition of the studied eclogites is similar to that of Fe-rich basalt and the enrichment in LILE and U suggest a subduction-related component. All these geochemical features confirm metasomatism. In comparison with many other garnet+clinopyroxene-bearing lenses in peridotites of the Bohemian Massif, the studied samples from Rubinberg and Klatschmühle are more akin to eclogite than pyroxenites, as reflected in high jadeite content in clinopyroxene, relatively low Mg, Cr, and Ni but relatively high Ti. However, trace elements of both bulk rock and individual mineral phases show also important differences making these samples rather unique. Metasomatism involving a melt requiring a trace element pattern very similar to the composition reported here has been suggested for the source region of rocks of the so-called durbachite suite, that is, ultrapotassic melanosyenites, which are found throughout the high-grade Variscan basement. Moreover, the Th, U, Pb, Nb, Ta, and Ti patterns of these newly studied melt inclusions (MI) strongly resemble those observed for peridotite and its enclosed pyroxenite from the T-7 borehole (Staré, České Středhoři Mountains) in N Bohemia. This suggests that a similar kind of crustal-derived melt also occurred here. This study of granitic MI in eclogites from peridotites has provided the first direct characterization of a preserved metasomatic melt, possibly responsible for the metasomatism of several parts of the mantle in the Variscides.     

Standard candles from the Gaia perspective

The ESA Gaia mission will bring a new era to the domain of standard candles. Progresses in this domain will be achieved thanks to unprecedented astrometric precision, whole-sky coverage and the combination of photometric, spectrophotometric and spectroscopic measurements. The fundamental outcome of the mission will be the Gaia catalogue produced by the Gaia Data Analysis and Processing Consortium (DPAC), which will contain a variable source classification and specific properties for stars of specific variability types. We review what will be produced for Cepheids, RR Lyrae, Long Period Variable stars and eclipsing binaries.     

Generation of CO2-rich melts during basalt magma ascent and degassing

To test mechanisms of basaltic magma degassing, continuous decompressions of volatile-bearing (2.7–3.8 wt% H₂O, 600–1,300 ppm CO₂) Stromboli melts were performed from 250–200 to 50–25 MPa at 1,180–1,140 °C. Ascent rates were varied from 0.25 to ~1.5 m/s. Glasses after decompression show a wide range of textures, from totally bubble-free to bubble-rich, the latter with bubble number densities from 10⁴ to 10⁶ cm^?3, similar to Stromboli pumices. Vesicularities range from 0 to ~20 vol%. Final melt H₂O concentrations are homogeneous and always close to solubilities. In contrast, the rate of vesiculation controls the final melt CO₂ concentration. High vesicularity charges have glass CO₂ concentrations that follow theoretical equilibrium degassing paths, whereas glasses from low vesicularity charges show marked deviations from equilibrium, with CO₂ concentrations up to one order of magnitude higher than solubilities. FTIR profiles and maps reveal glass CO₂ concentration gradients near the gas–melt interface. Our results stress the importance of bubble nucleation and growth, and of volatile diffusivities, for basaltic melt degassing. Two characteristic distances, the gas interface distance (distance either between bubbles or to gas–melt interfaces) and the volatile diffusion distance, control the degassing process. Melts containing numerous and large bubbles have gas interface distances shorter than volatile diffusion distances, and degassing proceeds by equilibrium partitioning of CO₂ and H₂O between melt and gas bubbles. For melts where either bubble nucleation is inhibited or bubble growth is limited, gas interface distances are longer than volatile diffusion distances. Degassing proceeds by diffusive volatile transfer at the gas–melt interface and is kinetically limited by the diffusivities of volatiles in the melt. Our experiments show that CO₂-oversaturated melts can be generated as a result of magma decompression. They provide a new explanation for the occurrence of CO₂-rich natural basaltic glasses and open new perspectives for understanding explosive basaltic volcanism.     

Implementation of an automatic calibration procedure for HYDROTEL based on prior OAT sensitivity and complementary identifiability analysis

Efficiency of hydrological models mostly depends on the quality of the calibration performed prior to use. In this paper, an automatic calibration framework for the distributed hydrological model HYDROTEL is proposed. The calibration procedure was performed for three watersheds characterized with different hydroclimatological conditions: the Sassandra located in Ivory Coast, Africa, and the Montmorency and Beaurivage watersheds located in Quebec (Canada). Results of one‐a‐time (OAT) sensitivity analysis showed that the order of the most sensitive parameters differs for each watershed. Thus, the sensitivity depends on the hydroclimatic and physiographic characteristics of the watersheds. Co‐linearity indices showed that all model parameters were identifiable, that is, none of the studied parameters could be explained by a combination of the other parameters. Following these findings, an automatic calibration was run. Results indicated there was good agreement between simulated and measured streamflows at the outlet of each watershed; Nash–Sutcliffe efficiency (NSE) ranging between 0.77 and 0.92 and R² ranging from 0.87 to 0.97. When comparing NSE and R² values obtained using a process‐oriented, multiple‐objective, manual calibration strategy, a slight increase in model efficiency was reached with the automatic calibration procedure (4.15% for NSE and 2.95% for R²) improving predictions of peak flows for the Montmorency and Beaurivage watersheds (temperate climate conditions) and flows beyond the rainfall season in the Sassandra watershed. The proposed automatic calibration procedure introduced in this paper may be applied to other distributed hydrological model. Copyright © 2013 John Wiley & Sons, Ltd.     

Dependence of clinopyroxene composition on cooling rate in basaltic magmas: Implications for thermobarometry

The compositional variation of clinopyroxene and the partitioning of major elements between clinopyroxene and melt are estimated as a function of the cooling rate. Clinopyroxenes were crystallized under variable cooling regimes (15, 9.4, 3, 2.1, and 0.5 °C/min from 1250 down to 1000 °C) and at isothermal conditions of 1000 °C from a basaltic composition at a pressure of 500 MPa under anhydrous and hydrous (H₂O = 1.3 wt.%) conditions. The clinopyroxene chemistry shows that, as the cooling rate increases, crystals are progressively depleted in Ca, Mg, Fe²⁺ and Si and enriched in Na, Fe³⁺, Al (mainly Al^IV), and Ti. Di and Hd versus CaTs and CaFeTs form a continuous binary solid solution characterized by higher amounts of tschermakitic components with increasing cooling rate. Two parameters (DH = Di + Hd and TE = CaTs + CaFeTs + En) are calculated to describe the effect of cooling rate on the clinopyroxene composition. The variation of DH/TE with increasing cooling rate evidences the kinetic process induced by rapid cooling in basic rocks under hydrous and anhydrous conditions.Dynamic crystallization conditions affect the partitioning of major elements between clinopyroxene and melt; with increasing cooling rate, the value of crystal–melt partition coefficient departs from that obtained at the isothermal condition. However, in spite of these variations, the values of ^cpx–meltKd_Fe–Mg remain almost constant. Therefore, the Fe²–Mg exchange between clinopyroxene and melt is not suitable to prove the (dis)equilibrium conditions in basaltic cooling magmas, giving rise to possible mismatches in the application of thermobarometers. The results of our study are consistent with that observed at the margin of dikes or in the exterior portions of lavas, where the cooling rate is maximized and disequilibrium compositions of clinopyroxene have been found.