The green revolution and poverty: a theoretical and empirical examination of the relation between technology and society

The paper deals with the effects of the green revolution (GR) technology on poverty both conceptually and empirically. It provides a brief overview of the GR debate and then presents a `slice' of this debate in detail - in particular, Lipton's and others' views on the supposed positive and negative benefits of the GR for the poor. The paper then provides a provocative critique of this literature for its underlying neo-Malthusianism of a specific type, for ignoring class issues in the analysis of the GR-poverty relation, and for treating this relation as a necessary relation. It subsequently presents an alternative statement on the GR-poverty issue, arguing that it is class relations that set limit within which population and technology work and affect poverty and that the GR-poverty relation is a contingent one, rather than necessary. In the light of the paper's criticisms and the alternative view it provides, a statistical analysis of the relation between the GR and the population factor on the one hand and poverty level and poverty reduction on the other in India is performed. This analysis is generally consistent with the paper's critique of the Liptonian framework.     

Experimental validation of the wavefield transform of electromagnetic fields

The wavefield transform is a mathematical technique for transforming low-frequency electromagnetic (EM) signals to a non-diffusive wave domain. The ray approximation is valid in the transform space and this makes traveltime tomography for 3D mapping of the electrical conductivity distribution in the subsurface possible. The transform, however, imposes stringent frequency bandwidth and signal-to-noise ratio requirements on the data. Here we discuss a laboratory scale experiment designed to collect transform quality EM data, and to demonstrate the practical feasibility of transforming these data to the wavefield domain.
We have used the scalable nature of EM fields to design a time-domain experiment using graphite blocks to simulate realistic field conditions while leaving the time scale undisturbed. The spatial dimensions have been scaled down by a factor of a thousand by scaling conductivity up by a factor of a million. The graphite blocks have two holes drilled into them to carry out cross-well and borehole-to-surface experiments. Steel sheets have been inserted between the blocks to simulate a conductive layer.
Our experiments show that accurate EM data can be recorded on a laboratory scale model even when the scaling of some features, such as drill-hole diameters, is not maintained. More importantly, the time-domain EM data recorded in cross-well and surface-to-borehole modes can be usefully and accurately transformed to the wavefield domain. The observed wavefield propagation delay is proportional to the direct distance between the transmitter and receiver in a homogeneous medium. In a layered medium, data accuracy is reduced and, hence, our results are not so conclusive. On the basis of the experimental results we conclude that the wavefield transform could constitute a valid approach to the interpretation of accurate, undistorted time-domain data if further improvement in the transform can be realized.     

Circulation characteristics of a monsoon depression during BOBMEX-99 using high-resolution analysis

The skill and efficiency of a numerical model mostly varies with the quality of initial values, accuracy on parameterization of physical processes and horizontal and vertical resolution of the model. Commonly used low-resolution reanalyses are hardly able to capture the prominent features associated with organized convective processes in a monsoon depression. The objective is to prepare improved high-resolution analysis by the use of MM5 modelling system developed by the Pennsylvania State University/National Center for Atmospheric Research (PSU/NCAR). It requires the objective comparison of high and low-resolution analysis datasets in assessing the specific convective features of a monsoon depression. For this purpose, reanalysis datasets of NCAR/NCEP (National Center for Atmospheric Research/National Centers for Environmental Prediction) at a horizontal resolution of 2.5‡ (latitude/longitude) have been used as first guess in the objective analysis scheme. The additional asynoptic datasets obtained during BOBMEX-99 are utilized within the assimilation process. Cloud Motion Wind (CMW) data of METEOSAT satellite and SSM/I surface wind data are included for the improvement of derived analysis. The multiquadric (MQD) interpolation technique is selected and applied for meteorological objective analysis at a horizontal resolution of 30 km. After a successful inclusion of additional data, the resulting reanalysis is able to produce the structure of convective organization as well as prominent synoptic features associated with monsoon depression. Comparison and error verifications have been done with the help of available upper-air station data. The objective verification reveals the efficiency of the analysis scheme.     

Observed daily large-scale rainfall patterns during BOBMEX-1999

A daily rainfall dataset and the corresponding rainfall maps have been produced by objective analysis of rainfall data. The satellite estimate of rainfall and the raingauge values are merged to form the final analysis. Associated with epochs of monsoon these rainfall maps are able to show the rainfall activities over India and the Bay of Bengal region during the BOBMEX period. The intra-seasonal variations of rainfall during BOBMEX are also seen using these data. This dataset over the oceanic region compares well with other available popular datasets like GPCP and CMAP. Over land this dataset brings out the features of monsoon in more detail due to the availability of more local raingauge stations.     

Palaeomagnetic study of Archaean Banded Hematite Jasper Rocks from the Singhbhum-Orissa Craton, India

The Banded Hematite Jasper Formation within the Iron Ore Supergroup of the Singhbhum Craton in eastern India comprises fine alternating layers of jasper and specularite. It was deposited at 3000 Ma and deformed by a mobile episode at 2700 Ma. Hematite pigment (<1 μm) mixed with cryptocrystalline silica and specularite (> 10 μm) is chiefly responsible for red to brown rhythmic bands in the hematite jasper facies although thermomagnetic study also shows that minor amounts (1–2%) of magnetite are present. Palaeomagnetic study identifies a dual polarity remanence resident in hematite (D/I = 283/60°, α₉₅ = 12°) which predates deformation. Studies of the fabric of magnetic susceptibility and rock magnetic results suggest a diagenetic origin for this magnetisation with the hematite formed from oxidation of primary magnetite. The palaeopole (32°E, 24°N, dp/dm = 14/18°) records the earliest post-metamorphic magnetisation event in the Orissa Craton. A minimum apparent polar wander motion of the Orissa-Singhbhum craton of through 80° is identified during Late Archaean times (2900-2600 Ma).     

A GIS based hydrogeomorphic approach for identification of site-specific artificial-recharge techniques in the Deccan Volcanic Province

The Deccan Volcanic Province (DVP) of India, as a whole, faces a severe shortage of water despite receiving a high annual rainfall, this is primarily due to excess runoff and lack of water conservation practices. In this study, an attempt is made to identify zones favourable for the application and adaptation of site-specific artificial-recharge techniques for augmentation of groundwater through a Geographical Information System (GIS) based hydrogeomorphic approach in the Bhatsa and Kalu river basins of Thane district, in western DVP. The criteria adopted for the GIS analysis were based on the hydrogeomorphological characteristics of both basins extracted from the IRS-1C LISS-III data supported by information on drainage pattern, DEM derived slope, lineament density, drainage density, and groundwater condition. The integrated study helps design a suitable groundwater management plan for a basaltic terrain.     

Hydrography of the eastern Arabian Sea during summer monsoon 2002

Hydrographic observations in the eastern Arabian Sea (EAS) during summer monsoon 2002 (during the first phase of the Arabian Sea Monsoon Experiment (ARMEX)) include two approximately fortnight-long CTD time series. A barrier layer was observed occasionally during the two time series. These ephemeral barrier layers were caused byin situ rainfall, and by advection of low-salinity (high-salinity) waters at the surface (below the surface mixed layer). These barrier layers were advected away from the source region by the West India Coastal Current and had no discernible effect on the sea surface temperature. The three high-salinity water masses, the Arabian Sea High Salinity Water (ASHSW), Persian Gulf Water (PGW), and Red Sea Water (RSW), and the Arabian Sea Salinity Minimum also exhibited intermittency: they appeared and disappeared during the time series. The concentration of the ASHSW, PGW, and RSW decreased equatorward, and that of the RSW also decreased offshore. The observations suggest that the RSW is advected equatorward along the continental slope off the Indian west coast.     

Environmental pollution impact on water and sediments of Kumaun lakes, Lesser Himalaya, India: a comparative study

A study of the water and sediment chemistry of the Nainital, Bhimtal, Naukuchiyatal and Sattal Lakes of Kumaun, has shown that the water of these lakes are alkaline and that electrical conductivity, total dissolved solid and bicarbonate HCO ₃ ⁻ are much higher in Nainital than in the other three lakes. The weathering of limestone lithology and anthropogenic pollution, the latter due to the very high density of population in the Nainital valley, are the primary sources of enhanced parameters. The low pH of Nainital Lake water is due to low photosynthesis and enhanced respiration, increasing CO₂ in the water and the consequent enhancement of Ca²⁺ and HCO ₃ ⁻ . The dissolved oxygen in Nainital Lake is less compared to other lakes, indicating anoxic conditions developing at the mud–water interface at depth. The PO ₄ ³⁻ content in Nainital is higher (124 μg/l), showing an increasing trend over time leading to eutrophic conditions. The trace metals (Cu, Co, Zn, Ni, Mn, and Sr) are present in greater amounts in the water of Nainital Lake than in the other three lakes, though Fe and Cr are high in Bhimtal and Fe in Naukuchiyatal. The higher abundance is derived from the leaching of Fe–Mg from metavolcanic and metabasic rocks. Most of the heavy metals (Cr, Ni, Cu, Mn, Fe, Sr, and Zn) significantly enrich the suspended sediments of the lakes compared to the bed sediments which due to their adsorption on finer particles and owing to multiple hydroxide coating and organic content, except for Fe, which is enriched in the bed sediments. The high rate of sedimentation, 11.5 mm/year in Nainital, compared to Bhimtal with 4.70 mm/year, Naukuchiyatal with 3.72 mm/year, and Sattal with 2.99 mm/year, has resulted in shorter residence time, poor sorting of grains, and lesser adsorption of heavy metals, leading consequently, their depletion in the bed sediments of Nainital Lake.     

Chemo‐mechanics of cemented granular solids subjected to precipitation and dissolution of mineral species

This paper studies the chemo‐mechanics of cemented granular solids in the context of continuum thermodynamics for fluid‐saturated porous media. For this purpose, an existing constitutive model formulated in the frame of the Breakage Mechanics theory is augmented to cope with reactive processes. Chemical state variables accounting for the reactions between the solid constituents and the solutes in the pore fluid are introduced to enrich the interactions among the microstructural units simulated by the model (i.e., grains and cement bonds). Two different reactive processes are studied (i.e., grain dissolution and cement precipitation), using the chemical variables to describe the progression of the reactions and track changes in the size of grains and bonds. Finally, a homogenization strategy is used to derive the energy potentials of the solid mixture, adopting probability density functions that depend on both mechanical and chemical indices. It is shown that the connection between the statistics of the micro‐scale attributes and the continuum properties of the solid enables the mathematical capture of numerous mechanical effects of lithification and chemical deterioration, such as changes in stiffness, expansion/contraction of the elastic domain, and development of inelastic strains during reaction. In particular, the model offers an interpretation of the plastic strains generated by aggressive environments, which are here interpreted as an outcome of chemically driven debonding and comminution. As a result, the model explains widely observed macroscopic signatures of geomaterial degradation by reconciling the energetics of the deformation/reaction processes with the evolving geometry of the microstructural attributes. Copyright © 2015 John Wiley & Sons, Ltd.