渤海湾盆地北塘凹陷古近系湖相白云岩 地质特征及古环境意义

湖相白云岩是渤海湾盆地北塘凹陷古近系沙河街组三段发现的一种特殊油气储层类型。根据钻井岩心、古生物、薄 片、扫描电镜及电子探针等分析,确定了该套白云岩的主要岩石类型及矿物特征,并通过地球化学特征分析,对白云岩的 形成环境进行了探讨。北塘凹陷白云岩常与泥岩和方沸石岩呈互层状产出,其次为均匀块状;矿物成分主要有白云石、方 沸石、粘土矿物等。通过X射线衍射、主微量元素地球化学分析,对白云岩形成时的古盐度、古温度、水深、氧化还原条 件等进行了研究,认为研究区白云岩沉积于高盐度、较高水体温度和较高PH值的半咸水湖湾还原环境。海水的侵入使湖水 的含盐度增大,提供了有利的物理化学条件,促进了白云岩的形成。     

Co-production of Tight Gas and Coalbed Methane from Single Wellbore: a Simulation Study from Northeastern Ordos Basin,China

Natural Resources Research - Focusing on vertical multi-layer superimposition of unconventional natural gas reservoirs in coal-bearing strata, research on the co-production of tight gas and coalbed...     

基于动态聚类法的安顺降雪环流分型研究

该文以500 hPa环流作为关键影响因子,采用K-means动态聚类分型,将近10 a安顺降雪划分为平直气流型（Ⅰ）、南支槽型（Ⅱ）、多波动型（Ⅲ）3种主要形势。个例分析和合成分析表明:3种形势下降雪过程中相态变化、区域、持续时间等特点有所不同。合成分析还表明：3种形势在500 hPa环流上有明显的区别,Ⅰ型在高原东侧到贵州的气流基本平直,Ⅱ型从高原东侧到贵州有1个明显的南支槽,Ⅲ型在高原东侧到贵州有多个波动槽影响,在高原北侧沿河套地区和孟湾以东均有槽影响,形成阶梯槽。此外滇黔准静止锋的强度、影响区域、物理量以及垂直方向湿度配置、逆温等方面均有所区别：Ⅰ型湿层和上升区浅薄,有1℃左右逆温;Ⅱ型湿层较薄,Ⅱ型在贵州中部有3℃逆温范围较窄;Ⅲ型中低层有宽广的湿层,水汽和抬升条件配合较好,几乎没有逆温。     

磨西-田湾剪切带氡异常及其对金矿化的指示

测氡方法是寻找深部隐伏矿的一种放射性地球物理方法.在川西田湾大发沟矿床,由于金矿化严格受剪切带和辉绿岩脉控制,且剪切带与辉绿岩脉密切伴生,因此,应用测氡方法寻找剪切带和辉绿岩脉可以达到间接找金矿的目的.     

矿区采动断裂的稳定性评价

矿区优势断裂对地表岩移具明显的控制作用。采动断裂的稳定与否,不仅取决于开采区与断裂的距离和开采规模,更重要的在于采动断裂本身系列优势指标的大小,据此认识,用模糊数学方法对其稳定性进行了综合评价,得出了与实际相吻合的结论。      

材料研究与制备过程中的几个矿物学岩石学问题

在材料的研究与制备过程中往往会遇到很多有趣的矿物学、岩石学问题。这些问题有些是矿物学工作者和材料研究者所熟悉的,是材料研究者直接利用了矿物学工作者的研究成果。而有些问题是材料研究者首先发现,并将其中的某些条件加以利用,但缺少深入的矿物学理论研究;还有些工作是矿物学工作者得到的矿物学纯理论研究成果,但却不知如何应用到材料的开发与研究中。这就造成了介于矿物学与材料学之间的一个薄弱环节。这个薄弱环节为矿物、岩石工作者提供了一个广阔的研究领域和很多富有诱惑力的崭新的研究课题。于是一个新的分支学科———矿…     

长白山天池火山全新世喷发与岩石地球化学特征

全新世以来长白山天池火山以爆炸式喷发为特点,其喷发物包括空降堆积浮岩、熔结凝灰岩和碎成熔岩,除了极少量粗面质成分（SiO2<65％）,均属于碱流质火山碎屑岩（SiO2＝70%～73％,K2O+Na2O=10%～11%）。火山岩的矿物学（造岩矿物和残余矿物）和主微量元素、SrNd同位素地球化学研究表明,天池火山全新世火山岩与造锥阶段、造盾阶段火山岩是同源（幔源）岩浆演化的产物,全新世火山岩都具有强烈而相似的Eu、Ba、Sr、Ti负异常,指示了岩浆演化主要受斜长石的强烈分离结晶作用控制。     

Correcting the TRMM rainfall product for hydrological modelling in sparsely-gauged mountainous basins

This study developed a correction approach to improve the rainfall field estimation using the TRMM rainfall product in a sparsely-gauged mountainous basin. First, Thiessen polygons were generated to define the measurement domain of each raingauge. Second, the rainfall of TRMM pixels in each Thiessen polygon was corrected using a benchmark method based on the difference between the monthly rainfall estimated by a raingauge and the TRMM pixel that possessed a gauge station (referred to as a gauged pixel). Third, the rainfall values in the gauged pixels were adjusted to the weighted average value of the gauge rainfall and corrected pixel rainfall. Finally, the rainfall in the non-gauged TRMM pixels was corrected as the sum of two terms. The first term is the adjusted rainfall in the corresponding gauged pixel in the same Thiessen polygon, and the second term is the rainfall (after benchmark correction) difference between the current pixel and the gauged pixel. Our results indicate that the corrected rainfall data outperforms the original TRMM product in the simulations of moderate and low flows and outperforms the sparse raingauges in the simulations of both peak and low flows.

EDITOR A. Castellarin; ASSOCIATE EDITOR S. Huang     

地闪对崇明地震台地球物理观测的干扰

通过对比崇明地区地闪及崇明地震台地球物理观测资料,发现受地闪引起的电磁场变化的直接作用或对仪器元件的间接作用,地磁、地电、电磁扰动和水位观测干扰比例较高,干扰幅度与地闪距离及形成的电流强度有关。具体干扰形态如下：①对电磁扰动干扰表现为单向突跳和测值的整体抬升;②对地磁测项干扰表现为正负方向的单点突跳;③对大地电场干扰表现为大幅震荡;④对水位观测干扰表现为大幅突跳。     

A high accurate automated first-break picking method for seismic records from high-density acquisition in areas with a complex surface

As the application of high-density high-efficiency acquisition technology becomes more and more wide, the areas with complex surface conditions gradually become target exploration areas, and the first-break picking work of massive low signal-to-noise ratio data is a big challenge. The traditional method spends a lot of manpower and time to interactively pick first breaks, a large amount of interactive work affects the accuracy and efficiency of picking. In order to overcome the shortcoming that traditional methods have weak anti-noise to low signal-to-noise ratio primary wave, this paper proposes a high accurate automated first-break picking method for low signal-to-noise ratio primary wave from high-density acquisition in areas with a complex surface. Firstly, this method determines first-break time window using multi-azimuth spatial interpolation technology; then it uses the improved clustering algorithm to initially pick first breaks and then perform multi-angle comprehensive quality evaluation to first breaks according to the following sequence: ‘single trace → spread → single shot → multiple shots’ to identify the abnormal first breaks; finally it determines the optimal path through the constructed evaluation function and using the ant colony algorithm to correct abnormal first breaks. Multi-azimuth time window spatial interpolation technology provides the base for accurately picking first-break time; the clustering algorithm can effectively improve the picking accuracy rate of low signal-to-noise ratio primary waves; the multi-angle comprehensive quality evaluation can accurately and effectively eliminate abnormal first breaks; the ant colony algorithm can effectively improve the correction quality of low signal-to-noise ratio abnormal first breaks. By example analysis and comparing with the commonly used Akaike Information Criterion method, the automated first-break picking theory and technology studied in this paper has high picking accuracy and the ability to stably process low signal-to-noise ratio seismic data, has a significant effect on seismic records from high-density acquisition in areas with a complex surface and can meet the requirements of accuracy and efficiency for massive data near-surface modelling and statics calculation.