Comparative Analysis of International Energy Consumption Characteristics and China's Countermeasures

With the rise of low carbon economy and the deterioration of the international energy situation, most countries in the world pay more attention to energy issues. In this paper, based on a comparison with several countries of large energy consumption, we used long sequence statistics to analyze the energy consumption characteristics from the world and the history, including energy consumption, energy consumption structure and energy efficiency, and then summed up the characteristics of energy consumption in developed countries, analyzed China's energy consumption process and the current stage, and found out the main problems of energy consumption in China. At last, countermeasures for the healthy development of China's energy were proposed, including actively promoting scientific and technological progress, upgrading energy structure, developing low carbon economy, rationalizing energy prices, improving the proportion of clean energy consumption and emphasizing synergistic effect on environment protection.     

腾冲火山构造区马站岩浆囊地球物理特征的再探讨

云南腾冲火山盆地深部存在岩浆囊是人们关注的问题,多方面进行了大量的研究且存在不同意见。作者此前依据低电阻异常推断出位于小空山、大空山、黑空山等火山口的下部,深13~30 km范围内东西向25 km,南北向30km的低电阻率的岩浆囊,其东侧为大盈江断裂。文章利用反射地震、重力、航空磁测资料进一步探讨了岩浆囊的其他地球物理特征。由于火山喷发,不仅在火山口附近形成了局部物质亏损,而且,岩浆囊本身也亏损了岩浆物质,在重力上延图中滤去了表层的火山局部负重力异常后,呈现出大空山北侧的与低阻体相对应的负重力异常,这与岩浆囊高温熔融状态含水低密度物质有密切关系。整体的重力负异常印证了低阻岩浆囊的存在。腾冲马站岩浆囊的温度为397~651°C,平均温度为524°C,其主体中心部位不可能存在磁性体。对航磁资料的处理,消除表层火山岩影响后,仍然发现有较强磁异常,其平面投影范围与低阻体相近,推断磁异常是岩浆囊顶层,在15 km深度以上范围内,随着岩浆囊体温度逐步下降,当低于480°C以后会形成新的铁磁性矿物,因此,在囊体上层出现了范围与囊体相近的较强的磁性体。反射地震仅仅在浅部较清楚地观测到较连续的反射波界面,是浅部火山岩、含水层、以及花岗岩顶界面的反映。向深部反射界面很不连续推测是由于多次岩浆上涌,其喷发时间有先后,成分有差异,故岩浆囊物质的不均匀性,虽然由于含水、矿化、熔融体构成了低电阻的共性,可温度的不均匀,却又显示了不同期次岩浆成分有变化,由岩浆囊向地表的通道上,东部花岗岩下为高速,相对于较低温度的物质,在小空山、大空山和黑空山深部沿大盈江断裂带有东西两个大的隐伏花岗岩体之间是最新的火山喷发通道,具有相对低速的通道。     

浅析北京平原区热储温度与断裂关系

本文搜集了38个水样点的水化学数据,这些水样点位于北京平原区的5个地热田。水样点的取水层位均为蓟县系雾迷山组,水样点揭露的地热水均属于同一个含水系统。根据水化学类型分析,该含水系统地下热水径流方向由西北、西南部向东部流动。利用Na-K-Mg三角图和饱和指数选取合适的地热温标,估算了各水样点的热储温度范围。热储温度的空间分布形态呈现北东向为长轴方向的椭圆形,与黄庄—高丽营断裂、良乡—前门断裂、八宝山断裂、顺义断裂、南口—孙河断裂和小汤山断裂等控热断裂有关,且北东向断裂对于温度的控制作用更大,热储温度在断裂交汇处出现高值区域,这些高值区域正是寻找地热的有利地区。     

内蒙古达来诺尔湖湖泊沉积物中敏感粒度组分沉积环境及地层分析

对达来诺尔湖北岸岸边(DL-0)、湖中心(DL-1)和湖南岸(DL-2)3个点的岩心沉积物进行了详细的岩性分析、粒度分析和粒度参数垂向分布序列分析。对沉积环境变化较为敏感的粒度组分的分析发现DL-0与DL-1和DL-2井岩心沉积物敏感粒度组分的峰值有较大差别,其粒度分布范围相差较大,表明湖北岸岸边、湖中心和湖南岸的沉积物来源和沉积环境的时空差异。敏感粒度组分含量随深度变化的初步分析表明,湖北岸岸边(DL-0)和湖中心(DL-1)两个点的沉积环境较为稳定;而位于湖南岸(DL-2)点的沉积环境变化比较大,包含了5个明显的沉积波动旋回,并对达来诺尔湖由北至南进行了沉积地层分析。在达来诺尔湖水下1.5m内主要是粒径0~200μm的颗粒,岩性为粘土、粉砂和砂,以粘土和粉砂为主,随着深度的增加,黏土含量增大,粉砂和砂含量减小。     

青海德令哈盆地石炭纪古环境研究

采自德令哈地区石炭系的12个碳酸盐岩样品测试、分析结果表明,德令哈地区石炭纪整体为分层中等的弱还原海相环境,水体受陆源碎屑注入影响明显。这种湿热、还原的高盐度水体利于生物的繁盛及有机质的保存,使德令哈地区石炭系发育极为优越的烃源岩条件。垂向上,克鲁克组偏高的咸化程度及分层程度,表明克鲁克组沉积水体相对闭塞、咸化程度较高,而怀头他拉组、扎布萨尕秀组灰岩形成于水体交换相对通畅的海域。从岩性组合、陆源碎屑注入变化及盐度、还原性的差异来看,克鲁克组主体为局限台地环境,而怀头他拉组、扎布萨尕秀组为开阔台地。作为对克鲁克组高盐度、还原性水介质环境的响应,克鲁克组烃源岩TOC条件要比怀头他拉组及扎布萨尕秀组优越。     

高效液相色谱-离子阱质谱法测定海洋微藻藻粉中的8种脂溶性毒素

建立了利用高效液相色谱-电喷雾离子阱质谱(HPLC-ESI-IT-MS)测定海洋微藻藻粉中8种典型脂溶性毒素的分析方法。藻粉样品经超声细胞破碎后,采用超声波辅助提取法对藻毒素进行提取,用HPLC-ESI-IT-MS多反应离子监测(MRM)模式对各种毒素(包括大田软海绵酸(OA)、鳍藻毒素1(DTX-1)、扇贝毒素2(PTX-2)、虾夷扇贝毒素(YTX)、原多甲藻酸1(AZA1)原多甲藻酸2(AZA2)、罗环内酯毒素(SPX),米氏裸甲藻毒素(GYM))进行测定。8种脂溶性藻毒素均在线性范围内线性关系良好(R2均在0.991以上),检出限均介于0.085～1.315 pg之间,加标回收率在88.5%～111.4%之间,方法重复性相对标准偏差(RSD)在4.82%～10.17%范围。应用该方法对利玛原甲藻干藻粉中的毒素进行了测定,分析结果良好,说明本方法是海洋微藻藻粉中脂溶性藻毒素测定的有效方法。     

Radar-based collision avoidance for unmanned surface vehicles

Unmanned surface vehicles (USVs) have become a focus of research because of their extensive applications. To ensure safety and reliability and to perform complex tasks autonomously, USVs are required to possess accurate perception of the environment and effective collision avoidance capabilities. To achieve these, investigation into realtime marine radar target detection and autonomous collision avoidance technologies is required, aiming at solving the problems of noise jamming, uneven brightness, target loss, and blind areas in marine radar images. These technologies should also satisfy the requirements of real-time and reliability related to high navigation speeds of USVs. Therefore, this study developed an embedded collision avoidance system based on the marine radar, investigated a highly real-time target detection method which contains adaptive smoothing algorithm and robust segmentation algorithm, developed a stable and reliable dynamic local environment model to ensure the safety of USV navigation, and constructed a collision avoidance algorithm based on velocity obstacle (V-obstacle) which adjusts the USV’s heading and speed in real-time. Sea trials results in multi-obstacle avoidance firstly demonstrate the effectiveness and efficiency of the proposed avoidance system, and then verify its great adaptability and relative stability when a USV sailing in a real and complex marine environment. The obtained results will improve the intelligent level of USV and guarantee the safety of USV independent sailing.     

Paratacamite from Gypsum Veins in Sandstones of the Kuqa Basin,Xinjiang, China: Implications for a New Epigenetic Cu Enrichment Mechanism

The Kuqa Basin filled with Paleogene evaporite series is located in the northeast of the Tarim Basin, Xinjiang, China. It is famous for sandstone‐hosted Cu deposits formed by synsedimentary processes. However, our recent studies reveal that there has been another Cu mineralization mechanism in this basin. Field investigations show that there is a close relationship among faults, salt domes, and brine. Cu deposits are mainly located in two east–west‐trending anticlinal belts in the basin, adjacent to salt domes in the belts. Cu minerals in gypsum veins of the Jidike and Kangcun formations have been investigated by SEM, EDS, and X‐ray diffraction methods. The occurrence of paratacamite in gypsum veins has been reported to coexist with glauberite and halite in the joint planes of sandstones. In addition, it occurs accompanying residual crystal salt encrustation in limestone fractures, or in sandstones in dendritic form. These features indicate that the surface‐Cu enrichment in the Kuqa Basin might have originated from Cu‐bearing brine in the underlying evaporite units, which migrated upward along fractures. In addition, the presence of H₂S in the east–west fault belt in the Kuqa Basin, and the discovery of surface sulfur, calcium carbonate, and covellite, suggest thermochemical sulfate reduction near salt domes in the deeper parts of the rock units. This process resulted in the generation of reduced brine and provided a favorable environment for Cu enrichment. Therefore, the surface‐Cu mineralization near salt domes is interpreted to be the result of Cu‐bearing brine migrating upward to the surface along faults (or joints) following the intrusion of deep salt domes. The geological evidence indicates the presence of reducing brine and Cu‐bearing brine near the salt dome in the deeper rocks of the Kuqa Basin, thus making the intrusive contact zone of the salt dome a favorable site for the epigenetic enrichment of Cu. Our study demonstrates that Cu enrichment in the Kuqa Basin resulted not only from synsedimentary deposition but also through epigenetic enrichment associated with salt dome intrusion and brine‐rich fluids.     

Non-capacity transport of non-uniform bed load sediment in alluvial rivers

Rivers often witness non-uniform bed load sediment transport. For a long time, non-uniform bed load transport has been assumed to be at capacity regime determined exclusively by local flow. Yet whether the capacity assumption for non-uniform bed load transport is justified remains poorly understood. Here, the relative time scale of non-uniform bed load transport is evaluated and non-capacity and capacity models are compared for both aggradation and degradation cases with observed data. As characterized by its relative time scale, the adaptation of non-uniform bed load to capacity regime should be fulfilled quickly. However, changes in the flow and sediment inputs from upstream or tributaries hinder the adaptation. Also, the adaptation to capacity regime is size dependent, the finer the sediment size the slower the adaptation is, and vice versa. It is shown that the capacity model may entail considerable errors compared to the non-capacity model. For modelling of non-uniform bed load, noncapacity modelling is recommended, in which the temporal and spatial scales required for adaptation are explicitly appreciated.