Slab weakening: Mechanical and thermal-mechanical consequences for slab detachment

Abstract Slab detachment is a geophysical instability whose manifestation can be revealed by seismic tomography. Evidence of this phenomenon is in the Dinarides/Hellenic and the New Hebrides subduction zones. Subducted slabs in these regions are torn horizontally at depths ranging from 100 to 300 km. We constructed a viscoelastic three-dimensional finite element model and investigated the state of stress. We found that an area with high stress concentration of the order of several hundred MPa is formed near the tip of the tear inside the slab, which can cause lateral migration of the tear. Favorable conditions for slab detachment are characterized by large interplate frictional force at a subduction zone and small slab resistance force deeper down. Stress concentration increases with the down-dip tension inside the slab. The phenomenon of slab weakening has also been studied from a thermal-mechanical standpoint, using a two-dimensional convection model with non-Newtonian, temperature-dependent rheology. The stress-dependent rheology plays an important role in causing local weakening of the descending slab. In strongly time-dependent situations the fast descending slab is not strong everywhere but has a weak region in the middle, making it vulnerable to slab detachment. The presence of viscous heating will enhance slab detachment tendency by further weakening the interior by the frictional heating. Besides these effects, there are other mechanisms which can also weaken the slab interior and help to make slabs more pliable and susceptible to detachment.     

Recorder-Dependent Temperature Error of Expendable Bathythermograph

The accuracy of temperature measurement by the expendable bathythermograph (XBT) is examined for five types of recorders by comparison with co-located CTD measurements and statistical analysis of temperature profiles including an isothermal layer. A positive temperature error increasing downward is occasionally detected for two types of Japanese recorder which have been commonly used among Japanese oceanographic institutions and marine observatories. This error resembles to that reported by Bailey et al. (1989) and Wright (1991) for a different type of recorders, although its cause is not clearly understood. The irregular occurrence of the error suggests that the problem is not solely due to the recorders but rather by some inconsistency of the whole measuring system including them, an XBT probe and sea water. The error is estimated to increase at a rate of O (0.1°C/100 m), and it could be close to 1°C at the deepest part of the profiles (760 m for Tsurumi T-7). This revised version was published online in July 2006 with corrections to the Cover Date.     

Experimental study on the bidirectional inelastic deformation capacity of U‐shaped steel dampers for seismic isolated buildings

Hysteretic dampers are used to dissipate earthquake‐induced energy in base‐isolated structures by acquiring inelastic deformations, rendering their hysteretic behavior of vital importance. The present paper focuses on investigating the behavior of U‐shaped steel dampers under bidirectional loading; this is significantly different from their corresponding uniaxial behavior. Two main sets of loading tests on full‐scale specimens are conducted in this regard: (i) quasi‐static tests with simple histories and (ii) dynamic tests with realistic loading histories. Based on the results obtained in the quasi‐static tests, an interaction curve that accounts for the reduction of the cyclic deformation capacity is proposed. However, the fidelity of this relation must be assessed under loading conditions similar to those of a seismically isolated structure subjected to an earthquake, which represents the goal of the second set of tests. The results of the dynamic tests validate the proposed interaction curve for estimating the deformation capacity of U‐shaped steel dampers under bidirectional loading. Copyright © 2015 John Wiley & Sons, Ltd.     

A new set of MCSST equations for NOAA-9/AVHRR

A new set of multi-channel sea surface temperature (MCSST) equations for the Advanced Very High Resolution Radiometer (AVHRR) on NOAA-9 is derived from regression analyses between two-channel brightness temperatures andin situ SST obtained from moored buoys around Japan. Two equations are derived: one for daytime and the other for nighttime. They are linear split window type and both the equations contain a term dependent on satellite zenith angle, which has not been accounted for in the previous daytime split window equations for NOAA-9. It is shown that the new set of equation can give SSTs in much better precision than those without the zenith-angle-dependent terms. It is also found that the split window equation for NOAA-9 provided by the National Oceanographic and Atmospheric Administration/National Environmental Satellite, Data and Information Service (NOAA/NESDIS) considerably underestimates the daytime SSTs; sometimes nighttime SSTs are evenhigher than daytime SSTs. This is because the zenith angle effect to the radiation deficiet is neglected in the daytime equation by NOAA/NESDIS. By using the new MCSST equations, it is expected that the quality of satellite MCSST would be much improved, at least in regional applications around Japan, for the period of NOAA-9's operation.     

Large kinetic power in FRII radio jets

We investigate the total kinetic powers (L _j) and ages (t _age) of powerful jets of four FR II radio sources (Cygnus A, 3C 223, 3C 284, and 3C 219) by the detail comparison of the dynamical model of expanding cocoons with observed ones. It is found that these sources have quite large kinetic powers with the ratio of L _j to the Eddington luminosity (L _Edd) resides in 0.02<L _j/L _Edd<10. Reflecting the large kinetic powers, we also find that the total energy stored in the cocoon (E _c) exceed the energy derived from the minimum energy condition (E _min): 2<E _c/E _min<160. This implies that a large amount of kinetic power is carried by invisible components such as thermal leptons (electron and positron) and/or protons.     

Pin‐supported walls for enhancing the seismic performance of building structures

An application of a pin‐supported wall‐frame system in retrofitting an eleven‐story steel reinforced concrete frame is introduced. The retrofit aims at enhancing integrity and avoiding weak story failure in an existing moment‐resisting frame. Seismic performance of the building before and after the retrofit is assessed through nonlinear dynamic analysis. The results show that the pin‐supported walls are effective in controlling the deformation pattern of the ductile frame and hence in avoiding weak story failure. With the well‐controlled deformation pattern, carefully arranged energy dissipating devices are able to concentrate energy dissipations so that damage to the rest of the structure can be significantly reduced. Copyright © 2012 John Wiley & Sons, Ltd.     

P‐O‐rich sulfide phase in CM chondrites: Constraints on its origin on the CM parent body

CM chondrites are a group of primitive meteorites that have recorded the alteration history of the early solar system. We report the occurrence, chemistry, and oxygen isotopic compositions of P‐O‐rich sulfide phase in two CM chondrites (Grove Mountains [GRV] 021536 and Murchison). This P‐O‐rich sulfide is a polycrystalline aggregate of nanometer‐size grains. It occurs as isolated particles or aggregates in both CM chondrites. These grains, in the matrix and in type‐I chondrules from Murchison, were partially altered into tochilinite; however, grains enclosed by Ca‐carbonate are much less altered. This P‐O‐rich sulfide in Murchison is closely associated with magnetite, FeNi phosphide, brezinaite (Cr₃S₄), and eskolaite (Cr₂O₃). In addition to sulfur as the major component, this sulfide contains ~6.3 wt% O, ~5.4 wt% P, and minor amounts of hydrogen. Analyses of oxygen isotopes by SIMS resulted in an average δ¹⁸O value of ?22.5 ‰ and an average Δ¹⁷O value of 0.2 ± 9.2 ‰ (2σ). Limited variations in both chemical compositions and electron‐diffraction patterns imply that the P‐O‐rich sulfide may be a single phase rather than a polyphase mixture. Several features indicate that this P‐O‐rich sulfide phase formed at low temperature on the parent body, most likely through the alteration of FeNi metal (a) close association with other low‐temperature alteration products, (b) the presence of hydrogen, (c) high Δ¹⁷O values and the presence in altered mesostasis of type‐I chondrules and absence in type‐II chondrules. The textural relations of the P‐O‐rich sulfide and other low‐temperature minerals reveal at least three episodic‐alteration events on the parent body of CM chondrites (1) formation of P‐O‐rich sulfide during sulfur‐rich aqueous alteration of P‐rich FeNi metal, (2) formation of Ca‐carbonate during local carbonation, and (3) alteration of P‐O‐rich sulfide and formation of tochilinite during a period of late‐stage intensive aqueous alteration.     

Short-term variability of Jupiter’s extended sodium nebula

Ground-based optical observations of D₁ and D₂ line emissions from Jupiter’s sodium nebula, which extend over several hundreds of jovian radii, were carried out at Mt. Haleakala, Maui, Hawaii using a wide field filter imager from May 19 to June 21, 2007. During this observation, the east-west asymmetry of the nebula with respect to the Io’s orbital motion was clearly identified. Particularly, the D₁+D₂ brightness on the western side of Jupiter is strongly controlled by the Io phase angle. The following scenario was developed to explain this phenomenon as follows: First, more ionospheric ions like NaX⁺, which are thought to produce fast neutral sodium atoms due to a dissociative recombination process, are expected to exist in Io’s dayside hemisphere rather than in the nightside one. Second, it is expected that more NaX⁺ ionospheric ions are picked up by the jovian co-rotating magnetic field when Io’s leading hemisphere is illuminated by the Sun. Third, the sodium atom ejection rate varies with respect to Io’s orbital position as a result of the first two points. Model simulations were performed using this scenario. The model results were consistent with the observation results, suggesting that Io’s ionosphere is expected to be controlled by solar radiation just like Earth.     

Physical conditions producing slab stagnation: Constraints of the Clapeyron slope, mantle viscosity, trench retreat, and dip angles

Recent seismic tomography has revealed various morphologies in the subducted lithosphere. In particular, significant flattening and stagnation of slabs around the 660-km boundary are seen in some areas beneath the northwestern Pacific subduction zones. We examined the cause of slab stagnation in terms of the Clapeyron slope of the phase transformation from ringwoodite to perovskite + magnesiowüstite, trench retreat velocity, dip angles, and high viscosity of the lower mantle based on two-dimensional (2-D) numerical simulations of thermal convection. In particular, we examined the conditions necessary for slab stagnation assuming a very small absolute value of the Clapeyron slope, which were proposed based on recent high-pressure, high-temperature (high P–T) experiments. Our calculations show that slabs tend to stagnate above the 660-km boundary with an increasing absolute value of the Clapeyron slope, viscosity jump at the boundary, and trench retreat velocity and a decreasing initial dip angle. Stagnant slabs could be obtained numerically for a realistic range of parameters obtained from high P–T experiments and other geophysical observations combining buoyancy, high lower-mantle viscosity, and trench retreat. We found that a low dip angle of a descending slab at the bottom of the upper mantle plays an important role in slab stagnation. Two main regimes underlie slab stagnation: buoyancy-dominated and viscosity-dominated regimes. In the viscosity-dominated regime, it is possible for slabs to stagnate above the 660-km boundary, even when the value of the Clapeyron slope is 0 MPa/K.     

Differential timing of vertical-axis block rotations in the northern Ryukyu Arc: Paleomagnetic evidence from the Koshikijima Islands,Japan

Over 300 samples for paleomagnetic analysis and K–Ar dating were collected from 27 sites at NW–SE and NE–SW trending dike swarms (herein, NW dikes and NE dikes, respectively) in the Koshikijima Islands, northern Ryukyu Arc. The NW dikes are Middle Miocene in age and have directions (D = ? 37.7^°, I = 51.8^°, α₉₅ = 9.6^°, and κ = 40.8) that are deflected westward relative to the stable eastern Asian continent. Conversely, the NE dikes, of Late Miocene age, have directions (D = 16.1^°, I = 57.7^°, α₉₅ = 7.1^°, and κ = 41.9) that show no such deflection. These differences are interpreted as indicating that the Koshikijima Islands underwent approximately 40^° of counter-clockwise rotation during the Middle to Late Miocene. A synthesis of the paleomagnetic and structural data suggests a three-stage history of extensional deformation: (1) displacement upon normal faults (F₁ faults) without vertical-axis block rotation, (2) strike-slip reactivation of F₁ faults and oblique-normal displacement on NE–SW-trending faults (F₂ faults) with vertical-axis block rotation, and (3) oblique-normal displacement on F₂ faults without vertical-axis block rotation. Regional differences in the timing and amount of counter-clockwise vertical-axis block rotations indicate that the northern Ryukyu Arc rotated as several distinct rigid blocks.