Distribution of ephyrae and polyps of jellyfish <Emphasis Type="Italic">Aurelia</Emphasis><Emphasis Type="Italic">aurita</Emphasis> (Linnaeus 1758) <Emphasis Type="Italic">sensu lato</Emphasis> in Mikawa Bay,Japan

We surveyed the distribution of colonies of polyps of Aurelia aurita sensu lato (s.l.) in Mikawa Bay, Japan. First, we surveyed the distribution of ephyrae of A. aurita s.l. at 75 stations encompassing the whole of Mikawa Bay in early 2008. A total of 37 ephyrae were sampled mostly from fishing ports. Ephyrae were most abundant around the islands located near the mouth of the bay, and decreased from the western part to the eastern part of Mikawa Bay. Next, we selected five fishing ports in Mikawa Bay where ephyrae occurred and surveyed the underside of floating piers and underwater overhangs of wharfs. We found dense colonies of polyps of A. aurita s.l. under nearly all of the floating piers at the two islands located near the mouth of the bay. Fitting a logistic regression model to the dataset showed that the percentage coverage of Aurelia polyps was significantly greater at the two islands compared with the other locations. In addition, the coverage of Aurelia polyps was greater when the coverage of other fouling organisms was in the range of 65–90%, and the coverage of Aurelia polyps was lower on floating piers with a vinyl surface and on concrete wharfs. The combined distribution of polyp colonies of A. aurita s.l. in Ise Bay and Mikawa Bay suggested that A. aurita s.l. in the two bays probably forms a single population and shoals of medusae mainly originate from protected harbors along the mouth-part of the bays.     

Hayabusa‐returned sample curation in the Planetary Material Sample Curation Facility of JAXA

Abstract– The Planetary Material Sample Curation Facility of JAXA (PMSCF/JAXA) was established in Sagamihara, Kanagawa, Japan, to curate planetary material samples returned from space in conditions of minimum terrestrial contaminants. The performances for the curation of Hayabusa‐returned samples had been checked with a series of comprehensive tests and rehearsals. After the Hayabusa spacecraft had accomplished a round‐trip flight to asteroid 25143 Itokawa and returned its reentry capsule to the Earth in June 2010, the reentry capsule was brought back to the PMSCF/JAXA and was put to a series of processes to extract recovered samples from Itokawa. The particles recovered from the sample catcher were analyzed by electron microscope, given their ID, grouped into four categories, and preserved in dimples on quartz slide glasses. Some fraction of them has been distributed for initial analyses at NASA, and will be distributed for international announcement of opportunity (AO), but a certain fraction of them will be preserved in vacuum for future analyses.     

Investigation of cutting methods for small samples of Hayabusa and future sample return missions

We report the investigation of cutting methods for Hayabusa samples. The purpose of our study is to explore the possibility of applying multiple analyses to a single particle effectively. We investigated the cutting performance of a blade dicing saw, laser, focused ion beam (FIB), and physical breaking by microindenter. Cutting performance was examined by estimating the aspect ratio of the cut slit, i.e., depth over width of the slit. We also investigated the possible contamination and sample damage by cutting. The result of the investigation shows that we can cut the samples from <50 μm to 500 μm using those methods with aspect ratios from 10 to 20, although they would introduce some contamination or damage to the samples. Our investigations also provide an important basis for the analysis of samples obtained by future sample return missions.     

A Flexible Prism used as an Image Stabilizer

An image stabilizer was constructed by making use of a flexible prism, which is widely used as an anti-vibration mechanism in handheld video cameras. The prism responds to frequencies up to 20 Hz, and can be simply inserted into existing optics. The performance of the prism has been confirmed by observing the Sun through it.     

Anisotropy of Mg isotopic fractionation during evaporation and Mg self-diffusion of forsterite in vacuum

Evaporation of solid materials under low-pressure conditions could play important roles in chemical and isotopic fractionations in the early solar system. We have studied anisotropy of isotopic fractionation of ²⁶Mg and ²⁵Mg during kinetic evaporation of forsterite (Mg₂SiO₄), which is potentially a powerful tool to understand thermal histories of crystals in the early solar system. Ion-microprobe depth profiling revealed that the Mg isotopic zoning profiles of forsterite evaporated at 1500-1700 °C are notably differing along the a-, b-, and c-axes, which can be attributed to anisotropy in self-diffusion coefficient of Mg (D) and an isotopic fractionation factor for evaporation of Mg (α). The D and α were obtained from zoning profiles by applying the diffusion-controlled isotopic fractionation model of Wang et al. [1999. Evaporation of single crystal forsterite: Evaporation kinetics, magnesium isotope fractionation, and implications of mass-dependent isotopic fractionation of a diffusion-controlled reservoir. Geochim. Cosmochim. Acta 63(6), 953-966.].The D is largest and smallest along the a- and c-axes, respectively. The activation energy of 560-670 kJ/mol indicates that Mg diffusion at 1500-1700 °C occurred in the intrinsic diffusion regime.The α seems to be larger along the a- or c-axes than along the b-axis. The α along the a- or c-axes show weak temperature dependence. The α along all the crystallographic orientations is closer to unity than that expected from the kinetic theory of gases. These lines of evidence suggest that surface processes such as breaking of bonds and surface diffusion are responsible for the isotopic fractionation.     

Note on the relation between the equinox and Guinot's non-rotating origin

We show that the non-rotating origin introduced by Guinot is nothing but a departure point on the movable equatorial plane, and discuss that, even if this is introduced, the uncertainty of determining the equinox correction cannot be avoided. A difficulty still remains, furthermore, when we take into account nutational effect, since the (true) departure point is not fixed but moves in RA direction on the equator secularly and periodically with respect to space. We discuss thoroughly the interrelation between old and new concepts, and propose an exact treatment sufficient enough for the precise requirements.     

Experimental study of the seismic behavior of partially concrete‐filled steel bridge piers under bidirectional dynamic loading

The seismic behavior of steel bridge piers partially filled with concrete under actual earthquake conditions was investigated by using 20 square section specimens subjected to static cyclic loading tests and single‐directional and bidirectional hybrid loading tests. Acceleration records of two horizontal NS and EW directional components for hard (GT1), medium (GT2), and soft grounds (GT3), obtained during the 1995 Kobe earthquake, were adopted in dynamic tests. Experimental results clearly showed that maximum and residual displacements under actual earthquake conditions cannot be accurately estimated by conventional single‐directional loading tests, especially for GT2 and GT3. A modified admissible displacement was proposed on the basis of bidirectional loading test results. The concrete fill can effectively improve the seismic resistance performance if the concrete inside the steel bridge piers is sufficiently high in quantity. Copyright © 2013 John Wiley & Sons, Ltd.     

Trace-element zoning patterns in porphyroblastic garnets in low-T eclogites: Parameter optimization of the diffusion-limited REE-uptake model

Compositional zoning patterns of the major elements and REEs in prograde-zoned garnets whose Mg/(Mg + Fe) atomic ratios increase rimward have been widely used to understand the metamorphic P–T–t trajectories, and the diffusion-limited REE-uptake model is a promising way to interpret their growth rates and the REE diffusion kinetics in the low-temperature eclogite. In order to elucidate their growth kinetics with Skora et al.'s (2006) diffusion-limited REE uptake model for prograde-zoned garnets, we examine the trace-element zoning patterns of two prograde-zoned porphyroblastic garnets (~6 mm in size) in low-temperature eclogites from two different localities. Core-to-rim trace-element profiles in a garnet (prp_5–9alm_61–67sps_1–3grs_24–30) of a glaucophane-bearing epidote eclogite of Syros (Cyclades, Greece) are characterized by the presence of Y + HREE peaks in the mantle, which might be attributed to a continuous breakdown of the titanite to form rutile during the garnet growth. In contrast, those in a garnet (prp_4–7alm_61–68sps_3–10grs_23–24) extracted from a lawsonite-eclogite of the South Motagua Mélange (SMM) (Guatemala) have prominent central peaks of Y + HREEs. Although the REE profiles of both the garnets can be explained by the diffusion-limited uptake, their Mn profiles suggest that their growth-rate laws are different: i.e., diffusion-controlled (Syros) and interface-controlled (SMM). Prior to the model application, we optimize the number of the parameters as the garnet grows with the interface-controlled processes based on the growth Péclet number. In particular, we propose the ratio of the REE diffusivity in the eclogitic matrix to the garnet growth rate as the new parameter. Visualizing the values of the new parameters allows to readily understand the relationship between the REE profiles and the REE-diffusion/garnet-growth kinetics in low-T eclogite. Our model refinement leads to the simple quantitative characterization of core-to-rim REE profiles in garnet in low-temperature eclogites.     

Properties of winter mixed layer variability on the shelf-slope region facing the Kuroshio—study of Tosa Bay, southern Japan

To examine the properties of winter mixed layer (ML) variability in the shelf-slope waters facing the Kuroshio, we analyzed historical temperature records and the simulated results of a triply nested high-resolution numerical model. As a candidate of the shelf-slope waters, we focused on Tosa Bay, off the southern Japan. A time series of observed monthly mean ML temperatures and depths in the bay exhibits a remarkable seasonal variation. The period when the ML develops can be divided into two regimes: from September to November, when the sea surface cooling is gradually enhanced, the ML temperature and depth decreases and increases, respectively; from January to March, the ML temperature and depth are kept nearly constant, while the sea surface cooling in January reaches its annual maximum. In the latter regime, variance for the monthly mean ML depth is the largest of the year. To further study the ML properties in the latter regime corresponding to winter, we examined simulated results. It was found that the largest variance for ML depth is attributed to a dominant intramonthly variation. This is related to a submesoscale variation with typical spatial scales of 10–20 km, induced by the Kuroshio and its frontal disturbances. Simulated monthly mean heat balance within the ML showed that heat advection balances with heat flux at the sea surface and entrainment through the ML bottom. Moreover, the monthly mean heat advection is determined mainly by the intramonthly eddy heat advection, suggesting that the high-frequency intramonthly variation related to submesoscale variations contributes significantly to the low-frequency monthly variations of the ML in winter.