Simple monitoring method for precaution of landslides watching tilting and water contents on slopes surface

A low-cost and simple monitoring method for early warning of landslides is proposed. To detect abnormal deformation of a slope, this method employs a tilt sensor in place of an extensometer on the slope surface. In order to examine the relevance of measuring rotation angle on a slope surface by tilt sensor, model tests were conducted, and rotation on the slope surface was observed together with slide displacement along the surface. The rotation data responded 30 min before failure in a model test, which could be useful as a signal for early warning. However, the behavior of rotation before failure varies from case to case, and thus, criteria to issue warning should be defined more carefully. For a model slope made of uniform loose sand, measurement of slide displacement along the slope surface is sensitive to failure at the toe, while the measurement of rotation on the slope surface is useful to detect the development of progressive failure upward along the slope. Wireless sensor units with microelectromechanical systems (MEMS) tilt sensor and volumetric water content sensor were also examined on a real slope in Kobe City, and a long-term monitoring was attempted. A simple but possible way to define the criteria of judgment to issue warning can be proposed based on combination of data obtained by the tilt sensors and volumetric water content sensors.     

Mineralogy and petrography of C asteroid regolith: The Sutter's Mill CM meteorite

Based upon our characterization of three separate stones by electron and X‐ray beam analyses, computed X‐ray microtomography, Raman microspectrometry, and visible‐IR spectrometry, Sutter's Mill is a unique regolith breccia consisting mainly of various CM lithologies. Most samples resemble existing available CM2 chondrites, consisting of chondrules and calcium‐aluminum‐rich inclusion (CAI) set within phyllosilicate‐dominated matrix (mainly serpentine), pyrrhotite, pentlandite, tochilinite, and variable amounts of Ca‐Mg‐Fe carbonates. Some lithologies have witnessed sufficient thermal metamorphism to transform phyllosilicates into fine‐grained olivine, tochilinite into troilite, and destroy carbonates. One finely comminuted lithology contains xenolithic materials (enstatite, Fe‐Cr phosphides) suggesting impact of a reduced asteroid (E or M class) onto the main Sutter's Mill parent asteroid, which was probably a C class asteroid. One can use Sutter's Mill to help predict what will be found on the surfaces of C class asteroids such as Ceres and the target asteroids of the OSIRIS‐REx and Hayabusa 2 sample return missions (which will visit predominantly primitive asteroids). C class asteroid regolith may well contain a mixture of hydrated and thermally dehydrated indigenous materials as well as a significant admixture of exogenous material would be essential to the successful interpretation of mineralogical and bulk compositional data.     

Importance of space weathering simulation products in compositional modeling of asteroids: 349 Dembowska and 446 Aeternitas as examples

Abstract— Based on recent progress in simulating space weathering on asteroids using pulse‐laser irradiation onto olivine and orthopyroxene samples, detailed analyses of two of the A and R type asteroid reflectance spectra have been performed using reflectance spectra of laser‐treated samples. The visible‐near‐infrared spectrum of olivine is more altered than that of pyroxene at the same pulse‐laser energy, suggesting that olivine weathers more rapidly than orthopyroxene in space. The same trend can be detected from reflectance spectra of the asteroids, where the more olivine an asteroid has, the redder its 1 μm band continuum can become. Comparison of the 1 μm band continuum slope and the 2/1 μm band area ratio between the asteroids and olivine and pyroxene samples (including the laser‐treated ones) suggests that asteroids may be limited in the degree of space weathering they can exhibit, possibly due to the short life of their surface regolith. Their pyroxenes may also have a limited chemical composition range. Fitting the visible continuum shape and other parts of the spectra (especially the 2μm part) has been impossible with any combination of common rock‐forming minerals such as silicates and metallic irons. However, this study shows, for the first time, excellent fits of reflectance spectra of an A asteroid (Aeternitas) and an R asteroid (Dembowska), including their visible spectral curves, band depths and shapes, and overall continuum shapes. Our results provide estimates that Aeternitas consists of 2% fresh olivine, 93% space‐weathered olivine, 1% space‐weathered orthopyroxene, and 4% chromite, and that Dembowska consists of 1% fresh olivine, 55% space‐weathered olivine, and 44% space‐weathered orthopyroxene. These results suggest that space weathering effects maybe important to the interpretation of asteroid reflectance spectra, even those with deep silicate absorption bands. Modified Gaussian model deconvolutions of the laser‐irradiated olivine samples show that their identity as olivine remained. The most recent submicroscopic mineralogical analyses have revealed that the laser‐irradiated olivine samples contain nanophase iron particles similar to those in space‐weathered lunar samples.     

Geochemical Characteristics of Intrusive Rocks, Southeastern Mindanao, Philippines: Implication to Metallogenesis of Porphyry Copper-gold Deposits

This paper describes petrologic and geochemical characteristics of intrusive rocks associated with porphyry copper deposits in south-eastern Mindanao, the Philippines, where the Kingking deposit is located. Intrusive rocks at the Kingking deposit, are classified into biotite-bearing diorite porphyry, hornblende diorite porphyry and diorite porphyry. Intrusive rocks in other areas in south-eastern Mindanao, including Batoto, Bukal, Maragusan, Masara, Amacan and Sumlog, are hornblende diorite porphyry and hornblende quartz diorite. They are adakitic in Sr/Y-Y diagram, but not in La/Yb-Yb diagram due to relatively low REE contents. The magmas are oxidizing as suggested by the high X_Mg of mafic silicate phenocrysts and SO₃ contents of microphenocrystic apatite. An Oligocene-Miocene diorite intrusive complex formed by calc-alkaline, hydrous, oxidizing magma is considered to be associated with porphyry-type copper-gold mineralization.     

Seasonal cycle of manganese in seawater in Harima Sound

Vertical and horizontal distributions of manganese in Harima Sound (Harima Nada, Seto Inland Sea) were measured in August and December 1979. High concentrations of dissolved and particulate manganese were found in bottom waters in August, suggesting that the bottom enrichment is probably due to the diffusion of dissolved manganese out of the sediment. From measured distributions, we estimate the annual flux of manganese at the sediment-water interface to be more than 800 tons per year, if Harima Sound is a closed system for manganese.     

Sedimentation rate and heavy metal pollution in sediments in Harima Nada (Harima Sound), Seto Inland Sea

Sedimentation rates were determined with the²¹⁰Pb technique in six sediment cores from Harima Nada (Harima Sound), Seto Inland Sea. The rate of deposition varies from 0.11 g cm^–2y^–1 in the northern part to 0.33 g cm^–2 y^–1 in the southern part of the basin. A marked increase in copper and zinc content was observed above a depth in the core corresponding to about 1900 A.D. as a result of increasing human activities. Anthropogenic input of copper and zinc decreased slightly after 1970. Natural background levels of copper and zinc in the sediment in this sound are 11–16 ppm and 100–120 ppm, respectively. The total amounts of anthropogenic copper and zinc in the sediments were estimated to be 110–180g cm^–2 and 610–1,280g cm^–2, respectively. These values constitute 40–50% of the total sedimentary input of copper and zinc in the sediments since about 1900 A.D.     

Vertical distribution of particulate manganese and iron in the Beppu Bay

Around the thermocline, difference in the depth of the maximum concentration between particulate manganese and iron was observed above the basin located at the south-western corner of the Beppu Bay, along with the remarkable difference in pH and Eh.     

Mass balance of heavy metals in the seto inland sea, Japan

To discuss the geochemical and environmental behavior of heavy metals in the Seto Inland Sea, the largest semi-enclosed coastal sea in Japan, mass balances of Cu and Zn were studied by application of a simple box model using sedimentation rates and heavy metal contents of core sediments. In 1980, total sedimentary loads of Cu and Zn over the whole area of the Sea were estimated to be 630 and 3500 tons year⁻¹, respectively. Further, the sedimentary loads without (natural) and with human activities were estimated separately to be, respectively, 320 and 310 tons year⁻¹ for Cu and 1800 and 1700 tons year⁻¹ for Zn. Total inputs of Cu and Zn into the Sea, in 1980 were estimated to be 870 and 4250 tons year⁻¹ about one half of this being the result of human activities. 70% of the Cu input and 80% of the Zn input are taken into the sediments. Mean residence times of Cu and Zn in the Sea are calculated to be ≈0.3 and 0.2 years, respectively. Since these values are relatively small compared to the mean residence time of the seawater (0.9 years), Cu and Zn supplied to the Sea are considered to be accumulated rapidly in the sediments.     

The effect of stress boundary conditions on fluid-driven fracture propagation in porous media using a phase-field modeling approach

A phase-field approach for fluid-driven fracture propagation in porous media with varying constant compatible stress boundary conditions is discussed and implemented. Since crack opening displacement, fracture path, and stress values near the fracture are highly dependent on the given boundary conditions, it is crucial to take into account the impact of in situ stresses on fracturing propagation for realistic applications. We illustrate several numerical examples that include the effects of different boundary conditions on the fracture propagation. In addition, an example using realistic boundary conditions from a reservoir simulator is included to show the capabilities of our computational framework.     

Occurrences of Ore Minerals and Fluid Inclusion Study on the Kingking Porphyry Copper–Gold Deposit, Eastern Mindanao, Philippines

The Kingking deposit is a gold‐rich porphyry copper deposit and the southernmost deposit at the eastern Mindanao mineralized belt, Philippines. It is underlain by Cretaceous–Paleogene sedimentary and volcanic rocks that are intruded by mineralized Miocene diorite porphyries and by barren Miocene–Pliocene dacite and diorite porphyries. The main alteration zones in the deposit are the inner potassic zone and the outer propylitic zone. The biotite‐bearing diorite and hornblende diorite porphyries are the primary host rocks of mineralization. Two dominant copper minerals, bornite and chalcopyrite, which usually occur as fracture fillings, are associated with fine crystalline quartz veinlet stockworks in the mineralized diorites. Minor secondary covellite, chalcocite and digenite are also observed. The primary Cu‐Fe sulfide phases initially deposited from ore fluids consisted of bornite solid solution (bnss) and intermediate solid solution (iss), which decomposed to form the bornite and chalcopyrite. Peculiar bornite pods that are different from dissemination and are associated with volcanic rock xenoliths in biotite‐bearing diorite porphyry are noted in a drill hole. These pods of bornite are not associated with quartz veinlet stockworks. Fluid inclusion analyses show three types of inclusions contained in Kingking samples: two‐phase fluid‐rich and vapor‐rich inclusions and polyphase hypersaline inclusions from porphyry‐type quartz veinlet stockworks. The liquid–vapor homogenization temperatures (T_H) and the dissolution temperature of halite daughter crystals (T_M) from the polyphase hypersaline inclusions predominantly range from 400°C up to >500°C. The wide range of T_H and T_M may be due to heterogeneous trapping of variable ratios of vapor and brine. For some inclusions, T_H > T_M and in some cases, T_H < T_M, indicating that some of the brine was supersaturated or saturated with NaCl at the time of entrapment. Calculated salinity of the polyphase hypersaline inclusions ranges from 40 to 60% NaCl equivalent. Temperature and vapor pressure of mineralized fluid were estimated to be 400°C and 16 MPa.