Ground water recharge and flow characterization using multiple isotopes

Stable isotopes of delta(18)O, delta(2)H, and (13)C, radiogenic isotopes of (14)C and (3)H, and ground water chemical compositions were used to distinguish ground water, recharge areas, and possible recharge processes in an arid zone, fault-bounded alluvial aquifer. Recharge mainly occurs through exposed stream channel beds as opposed to subsurface inflow along mountain fronts. This recharge distribution pattern may also occur in other fault-bounded aquifers, with important implications for conceptualization of ground water flow systems, development of ground water models, and ground water resource management. Ground water along the mountain front near the basin margins contains low delta(18)O, (14)C (percent modern carbon [pmC]), and (3)H (tritium units [TU]), suggesting older recharge. In addition, water levels lie at greater depths, and basin-bounding faults that locally act as a flow barrier may further reduce subsurface inflow into the aquifer along the mountain front. Chemical differences in ground water composition, attributed to varying aquifer mineralogy and recharge processes, further discriminate the basin-margin and the basin-center water. Direct recharge through the indurated sandstones and mudstones in the basin center is minimal. Modern recharge in the aquifer is mainly through the broad, exposed stream channel beds containing coarse sand and gravel where ground water contains higher delta(18)O, (14)C (pmC), and (3)H (TU). Spatial differences in delta(18)O, (14)C (pmC), and (3)H (TU) and occurrences of extensive mudstones in the basin center suggest sluggish ground water movement, including local compartmentalization of the flow system.     

The economic and food security implications of climate change in mali

The study focuses on economic and food security implications of projected climate change on Malian agriculture sector. Climate change projections made by two global circulation models are considered. The analysis focuses on the effects on crops, forages, and livestock and the resultant effects on sectoral economics and risk of hunger in Mali. Results show that under climate change, crop yield changes are in the range of minus 17% to plus 6% at national level. Simultaneously, forage yields fall by 5 to 36% and livestock animal weights are reduced by 14 to 16%. The resultant economic losses range between 70 to $142 million, with producers gaining, but consumers losing. The percentage of population found to be at risk of hunger rises from a current estimate of 34% to an after climate change level of 64% to 72%. A number of policy and land management strategies can be employed to mitigate the effects of climate change. In particular, we investigate the development of heat resistant cultivars, the adoption of existing improved cultivars, migration of cropping pattern, and expansion of cropland finding that they effectively reduce climate change impacts lowering the risk of hunger to as low as 28%.     

Brightness variations of the white light corona during the years 1964–67

Observations of the white light corona were made on over 900 days during the years 1964–67 at heights between 1.125 and 2.0 R with the K-coronameter at Mount Haleakala and Mauna Loa, Hawaii. The brightness distribution of the minimum corona was elliptical with average equatorial intensities three times the polar. Coronal features of the new cycle at 1.125 R occurred predominantly in the sunspot zones at 25–30° latitude and in a high latitude zone which migrated toward the North pole before solar maximum. The brightness of the inner corona doubled over this period and a close association is found between the average corona and 10.7-cm solar radio flux. Electron densities in the equatorial regions were nearly twice those of Van de Hulst's model corona, in agreement with the results of recent eclipse observations.At Hawaii Institute of Geophysics.     

Frictional effects on trapped shelf waves

This paper revisits models of coastal trapped waves and examines them with the inclusion of friction. In addition we use a numerical method which at least theoretically will have enhanced accuracy. The model has continuous stratification and variable depth. It is linear, quasigeostrophic and hydrostatic, and utilizes perturbation from this fundamental state. The model is applied with both idealized and realistic topography and stratification.Responsible Editior: Phil Dyke     

Global distribution of filaments during solar cycle No. 20

By tracing the positions of filaments on the solar disk for a series of consecutive Carrington rotations, one can make a compact representation of the changes in general topology of photospheric magnetic fields during the course of a solar cycle. Examples are shown for the time period 1964–1974, which may provide some insight into the long-term relationship of the mid-latitude diagonal filaments and the high latitude polar crown.     

The exaggerated radiocarbon age of deposit‐feeding molluscs in calcareous environments

Throughout northern Canada, live‐collected, pre‐bomb, deposit‐feeding marine molluscs from calcareous sediments yield greater apparent radiocarbon ages than do suspension feeders. We explore the size of this effect in a set of 57 paired datings of deposit feeders, mainly Portlandia arctica, and suspension feeders, mainly Hiatella arctica and Mya truncata, collected from both calcareous and non‐calcareous Holocene sediments. Deposit feeders from calcareous sediments are older than their suspension‐feeding counterparts by as much as 2240±130 ¹⁴C years. This is attributed to the uptake of ‘old’ bicarbonate derived from calcareous bedrock. The age discrepancy between suspension and deposit feeders in calcareous terrain is non‐systematic in space and time, thereby invalidating the application of a correction. In contrast, the age comparisons are concordant at sites located on the Precambrian Shield. In terrestrial environments underlain by carbonate, previous acceptance of dates on deposit feeders led to erroneous interpretations of deglaciation and relative sea‐level history, in both the North American and the Eurasian Arctic. This has prompted several researchers to exclude deposit feeders from their late Quaternary reconstructions. The same chronological problem of deposit‐feeding molluscs now needs to be more widely acknowledged by the marine community.     

A critique of offshore liquefied natural gas (LNG) terminal policy

The Maritime Transportation Security Act of 2002 amended the Deepwater Port Act of 1974 to permit the construction of offshore liquefied natural gas (LNG) terminals. Terminals with environmentally destructive open-loop regasification systems were quickly approved in the Gulf of Mexico. This study analyzed the political methods of the George W. Bush administration to determine how it developed offshore LNG. Findings showed that the Bush administration worked closely with the energy industry to promote national energy security and limited the role of certain federal and state agencies through a centralized policy process.     

Real time hybrid simulation: from dynamic system,motion control to experimental error

Real‐time hybrid simulation (RTHS) has increasingly been recognized as a powerful methodology to evaluate structural components and systems under realistic operating conditions. It is a cost effective approach compared with large scale shake table testing. Furthermore, it can maximally preserve rate dependency and nonlinear characteristics of physically tested (non)structural components. Although conceptually very attractive, challenges do exist that require comprehensive validation before RTHS should be employed to assess complicated physical phenomena. One of the most important issues that governs the stability and accuracy of an RTHS is the ability to achieve synchronization of boundary conditions between the computational and physical substructures. The objective of this study is to propose and validate an H_∞ loop shaping design for actuator motion control in RTHS. Controller performance is evaluated in the laboratory using a worst‐case substructure proportioning scheme. A modular, one‐bay, one‐story steel moment resisting frame specimen is tested experimentally. Its deformation is kept within the linear range for ready comparison with the reference closed‐form solution. Both system analysis and experimental results show that the proposed H_∞ strategy can significantly improve both the stability limit and test accuracy compared with several existing strategies. Another key feature of the proposed strategy is its robust performance in terms of unmodeled dynamics and uncertainties, which inevitably exist in any physical system. This feature is essential to enhance test quality for specimens with nonlinear dynamic behavior, thus ensuring the validity of the proposed approach for more complex RTHS implementations. Copyright © 2012 John Wiley & Sons, Ltd.     

Adaptive multi‐rate interface: development and experimental verification for real‐time hybrid simulation

Real‐time hybrid simulation (RTHS) is a powerful cyber‐physical technique that is a relatively cost‐effective method to perform global/local system evaluation of structural systems. A major factor that determines the ability of an RTHS to represent true system‐level behavior is the fidelity of the numerical substructure. While the use of higher‐order models increases fidelity of the simulation, it also increases the demand for computational resources. Because RTHS is executed at real‐time, in a conventional RTHS configuration, this increase in computational resources may limit the achievable sampling frequencies and/or introduce delays that can degrade its stability and performance. In this study, the Adaptive Multi‐rate Interface rate‐transitioning and compensation technique is developed to enable the use of more complex numerical models. Such a multi‐rate RTHS is strictly executed at real‐time, although it employs different time steps in the numerical and the physical substructures while including rate‐transitioning to link the components appropriately. Typically, a higher‐order numerical substructure model is solved at larger time intervals, and is coupled with a physical substructure that is driven at smaller time intervals for actuator control purposes. Through a series of simulations, the performance of the AMRI and several existing approaches for multi‐rate RTHS is compared. It is noted that compared with existing methods, AMRI leads to a smaller error, especially at higher ratios of sampling frequency between the numerical and physical substructures and for input signals with high‐frequency content. Further, it does not induce signal chattering at the coupling frequency. The effectiveness of AMRI is also verified experimentally. Copyright © 2016 John Wiley & Sons, Ltd.