Spatial distribution of sister species of vesicomyid bivalves Calyptogena okutanii and Calyptogena soyoae along an environmental gradient in chemosynthetic biological communities in Japan

Vesicomyid bivalves have a substantial biomass in deep-sea chemosynthetic biological communities in the Pacific. Using a novel multiplex-PCR (mPCR) method to identify the co-occurring vesicomyids in Sagami Bay, we analyzed the distribution of Calyptogena okutanii and Calyptogena soyoae along environmental gradients. All the known distributions of C. okutanii indicated the different preferences in salinity and temperature to those of C. soyoae, and in Sagami Bay, depth seemed to be an important environmental factor, too. Although the concentration of hydrogen sulfide in sediment was not examined, our results showed that the distributions of these two Calyptogena clams were affected by salinity and temperature.     

Nonlinear behavior of high-damping rubber bearings under horizontal bidirectional loading: full-scale tests and analytical modeling

Horizontal bidirectional loading tests are conducted for real-sized high-damping rubber (HDR) bearings with diameters of 700 mm (HDR700) and 1300 mm (HDR1300). The hysteresis loops of these bearings under bidirectional horizontal loadings are compared with those under unidirectional loadings. The results show that the bearing force measurement in the primary direction of loading increases when there is displacement in the orthogonal direction. Unusually, the maximum restoring force in the orthogonal direction to the primary loading direction occurs near zero displacement. On the basis of the observations of the restoring forces, a rate-independent model is proposed. This model simulates well the test results under both bidirectional loading and unidirectional loading. It can reproduce the irregular restoring forces characteristics around zero displacement as described above. Bidirectional loading induced twist deformation in the HDR bearings that increased local shear strains. This phenomenon results in an early failure as observed in HDR700. The additional shear strain is estimated based on the twist deformation measured by video image analysis. The comparison of the nominal total shear stress demonstrates that the increase of shear stress because of bidirectional loading occurs when the average shear strain is larger than about 200%. The larger the shear strain, the greater the bidirectional effect. It is shown that the nominal total shear stress of average strain of 350% under bidirectional circular loading pattern is approximately the same as the average shear strain of 400% under unidirectional loading. This means that the average shear strain of 350% under a bidirectional circular loading corresponds to a local shear strain of 400%. Copyright © 2012 John Wiley & Sons, Ltd.     

Seismic vertical array analysis for phase decomposition

We propose a vertical array analysis method that decomposes complex seismograms into body and surface wave time histories by using a velocity structure at the vertical array site. We assume that the vertical array records are the sum of vertically incident plane P and S waves, and laterally incident Love and Rayleigh waves. Each phase at the surface is related to that at a certain depth by the transfer function in the frequency domain; the transfer function is obtained by Haskell's matrix method, assuming a 1-D velocity structure. Decomposed P , S and surface waves at the surface are estimated from the vertical array records and the transfer functions by using a least-squares method in the frequency domain; their time histories are obtained by the inverse Fourier transform. We carried out numerical tests of this method based on synthetic vertical array records consisting of vertically incident plane P and S waves and laterally incident plane Love and Rayleigh waves. Perfect results of the decomposed P , S , Love and Rayleigh waves were obtained for synthetic records without noise. A test of the synthetic records in which a small amount of white noise was added yielded a reasonable result for the decomposed P , S and surface waves. We applied this method to real vertical array records from the Ashigara valley, a moderate-sized sedimentary valley. The array records from two earthquakes occurring at depths of 123 and 148 km near the array (epicentral distance of about 31 km) exhibited long-duration later phases. The analysis showed that duration of the decomposed S waves was a few seconds and that the decomposed surface waves appeared a few seconds after the direct S -wave arrival and had very long duration. This result indicated that the long-duration later phases were generated not by multireflected S waves, but by basin-induced surface waves.     

Internal differentiation of Kutsugata lava flow from Rishiri Volcano,Japan: Processes and timescales of segregation structures' formation

Internal differentiation processes in a solidifying lava flow were investigated for the Kutsugata lava flow from Rishiri Volcano in northern Japan. In a representative 6-m thick lava flow that was investigated in detail in this study, segregation products darker than the host lavas manifested mainly in the form of pipes (vesicle cylinders) and layers (vesicle sheets), occurring around 0.5–2.3 m and 2.0–4.0 m above the base, respectively. Both the cylinders and sheets are significantly richer in incompatible elements such as TiO₂ and K₂O than the host lavas, which suggest that these products essentially represent residual melt produced during solidification of the lava flow. Field observation and the geochemical features of the lavas suggest that the vesicle cylinders grew upward from near the base of the flow by continuous feeding of residual melt from the neighboring host lavas to the heads of the cylinders. On the other hand, the vesicle sheets were produced in situ in the solidifying lava flow as fracture veins caused by horizontal compression. The vesicle cylinders have a remarkably higher MgO content (up to 8 wt.%) than the host lava (< 6 wt.%), whereas the vesicle sheets display MgO depletion (as low as 3.5 wt.%). The relatively high MgO content of the vesicle cylinders cannot be explained solely by the mechanical mixing of olivine phenocrysts with the residual melt. It is suggested that the vesicle cylinders were produced by the extraction of olivine-bearing interstitial melt from an augite-plagioclase network in the host lava, whereas the vesicle sheets were formed by the migration of the residual melt from a crystal network consisting of plagioclase, augite, and olivine in the host lava into platy fractures. We infer that this selective crystal fractionation for forming the vesicle cylinders resulted from processes in which abundant vesicles rejected from the upward-migrating floor solidification front prevented olivine crystals from being incorporated into the crystal network in the host lava. The vesicle cylinders are considered to have formed in ∼ 1 day after the lava flow came to rest, while relatively large vesicle sheets (> 1 cm thick) appeared much later (after ∼ 9 days). The formation of these segregation products was essentially complete within 20 days after the lava emplacement.     

Gas seepage from Tokamachi mud volcanoes, onshore Niigata Basin (Japan): Origin, post-genetic alterations and CH4-CO2 fluxes

Methane and CO₂ emissions from the two most active mud volcanoes in central Japan, Murono and Kamou (Tokamachi City, Niigata Basin), were measured in from both craters or vents (macro-seepage) and invisible exhalation from the soil (mini- and microseepage). Molecular and isotopic compositions of the released gases were also determined. Gas is thermogenic (δ¹³C_CH4 from −32.9‰ to −36.2‰), likely associated with oil, and enrichments of ¹³C in CO₂ (δ¹³C_CO2 up to +28.3‰) and propane (δ¹³C_C3H8 up to −8.6‰) suggest subsurface petroleum biodegradation. Gas source and post-genetic alteration processes did not change from 2004 to 2010. Methane flux ranged within the orders of magnitude of 10¹-10⁴ g m⁻² d⁻¹ in macro-seeps, and up to 446 g m⁻² d⁻¹ from diffuse seepage. Positive CH₄ fluxes from dry soil were widespread throughout the investigated areas. Total CH₄ emission from Murono and Kamou were estimated to be at least 20 and 3.7 ton a⁻¹, respectively, of which more than half was from invisible seepage surrounding the mud volcano vents. At the macro-seeps, CO₂ fluxes were directly proportional to CH₄ fluxes, and the volumetric ratios between CH₄ flux and CO₂ flux were similar to the compositional CH₄/CO₂ volume ratio. Macro-seep flux data, in addition to those of other 13 mud volcanoes, supported the hypothesis that molecular fractionation (increase of the “Bernard ratio” C₁/(C₂ + C₃)) is inversely proportional to gas migration fluxes. The CH₄ “emission factor” (total measured output divided by investigated seepage area) was similar to that derived in other mud volcanoes of the same size and activity. The updated global “emission-factor” data-set, now including 27 mud volcanoes from different countries, suggests that previous estimates of global CH₄ emission from mud volcanoes may be significantly underestimated.     

Carbon and oxygen isotope chemostratigraphies of the Yangtze platform,South China: Decoding temperature and environmental changes through the Ediacaran

Multicellular animals first appeared on the earth during the Ediacaran period. However, the relationship between the abrupt biological evolution and environmental changes is still ambiguous. In order to examine seawater temperature and the carbon cycle through the Ediacaran, we analyzed the carbon and oxygen isotope compositions of carbonate rocks from drill cores from the Three Gorges area, South China. Importantly, the core samples include the Nantuo tillite, corresponding to the Marinoan glaciation, through the Doushantuo to the lower Dengying Fms. in ascending order.The δ¹³C profile displays five positive and five negative anomalies (PI-1 to 5 and NI-1 to 5), and the oxygen isotopes display very high absolute values around 0‰ with the highest at + 1.83‰. The combined δ¹⁸O and δ¹³C chemostratigraphies display both positive and negative correlations between the δ¹⁸O and δ¹³C values. The occurrence of the negative correlations supports the preservation of primary δ¹⁸O and δ¹³C values.The sample NI-4 has a negative correlation of the δ¹⁸O and δ¹³C excursions. The correlation supports a primary signature for both δ¹⁸O and δ¹³C variations. The positive δ¹⁸O excursion, accompanied by evidence of a eustatic sea-level fall, provides direct evidence for global cooling in the mid-Ediacaran; the 580 Ma Gaskiers Glaciation is a potential candidate for this global cooling event. The negative δ¹³C excursion was possibly caused by an increase in remineralization of dissolved organic carbon (DOC) due to enhanced continental weathering during the glaciation.Sample NI-5 is characterized by very low δ¹³C values, down to ? 10‰, corresponding to the Shuram-Wonoka-Pertatataka Excursion. The cause of the δ¹³C negative excursion is still not clear. However, a ubiquitous occurrence in excursions worldwide, and the lower δ¹³C values in deeper sections favor the enhancement of remineralization and respiration rather than secondary alteration, a restricted sea environment and lithification in coastal areas.