Magma transport and reservoir formation by a system of propagating cracks

A system of propagating cracks may explain magma transport and the evolution of a volcano. This paper considers only a basaltic magma. The system is controlled by two boundary conditions: the stress field, and the production rate of the magma-filled cracks in the mantle. Numerical solutions of crack propagation for various stress conditions, with a constant production rate high enough to coalesce isolated cracks, were performed, and the results applied to different tectonic conditions. For the hydrostatic stress conditions, most magma-filled cracks beneath a polygenetic volcano become trapped either in the lower crust, because there the density difference between magma and the host rocks () becomes suddenly small, compared with that in the mantle, or trapped in the upper crust, because there is near to zero. Magma traps composed of such cracks may grow into magma reservoirs if the production rate of cracks in the mantle is large. If horizontal stress with a vertical gradient is superimposed on the hydrostatic condition in the crust, that is, tensile stress which increases upward or compressional stress which increases downward, magmafilled cracks, even if the density of magma is higher than that of the crust, may ascend directly without trapping. When the crust undergoes relative tension, magma-filled cracks may become trapped. Then, the lower part of the trap may grow into a magma reservoir, while the upper part may become filled with dikes. When the production rate of cracks is small, an initial magma-filled crack can rise directly to the surface only when the stress with a gradient is superimposed as mentioned above, or when the average density in a crack decreases, owing to, for example, vesiculation of volatile components.     

Long-term precipitation and stream discharge records at seven forested experimental watersheds along a latitudinal transect in Japan: Jozankei,Kamabuchi, Takaragawa,Tsukuba, Tatsunokuchi-yama,Kahoku and Sarukawa

This data note introduces a database of long-term daily total precipitation and stream discharge data for seven forested watersheds in Japan that have been continuously monitored by the Forestry and Forest Products Research Institute. Three of the watersheds started data collection in the 1930s. Forest cover across the sites ranges from cool to warm temperate regions with the latitude spanning from 31 to 44° N and annual precipitation ranging from 1200 to 3000 mm yr⁻¹. The effects of vegetation change via clearcutting, thinning and forest fire (among other stressors) on stream discharge can be analysed from the long-term observation sites. Moreover, this multi-site dataset allows for inter- and intra-site comparisons of annual water loss (difference of annual precipitation and stream discharge). These long-term datasets can provide comprehensive insights into the effects of climate change and other stressors on forested ecosystems, not only in Japan but across a spectrum of forest types, if combined with other long-term records from other forested watersheds across the world.     

Crustal structure in and around the region of the 1995 Kobe Earthquake deduced from a wide-angle and refraction seismic exploration

Abstract The 1995 Kobe (Hyogo-ken Nanbu) earthquake (M_JMA 7.2, M_w 6.9) occurred on Jan. 17, 1995, at a depth of 17 km, beneath the areas of southern part of Hyogo prefecture and Awaji Island. To investigate P-wave velocity distribution and seismological characteristics in the aftershock area of this great earthquake, a wide-angle and refraction seismic exploration was carried out by the Research Group for Explosion Seismology (RGES) . The profile including 6 shot points and 205 observations was 135 km in length, extending from Keihoku, Northern Kyoto prefecture, through Kobe, to Seidan on Awaji Island. The charge of each shot was 350–700 kg. The P-wave velocity structure model showed a complicated sedimentary layer which is shallower than 2.5 km, a 2.5 km-thick basement layer whose velocity is 5.5 km/s, overlying the crystalline upper crust, and the boundary between the upper and lower crust.
Almost all aftershock hypocenters were located in the upper crust. However, the structure model suggests that the hypocenters of the main shock and some aftershock clusters were situated deeper than the boundary between the upper and lower crust. We found that the P-velocity in the upper crust beneath the northern part of Awaji Island is 5.64 km/s which is 3% lower than that of the surrounding area. The low-velocity zone coincides with the region where the high stress moment release was observed.     

Determination of water vapor and liquid water content by an iterative method

Summary A simple method of retrieving water vapor and liquid water content is presented and validated by applying the Special Sensor Microwave/Imager data using ground truth data from Japan. The method is based on an iterative technique which uses model functions of relating two geophysical parameters to brightness temperature. Water vapor is found by a model function of relating water vapor content to brightness temperature at 22.235 GHz. Liquid water content is found by two model functions. One function defines a level of clear sky condition, and the other gives a ratio of liquid water content to brightness temperature increased from clear sky conditions. The retrieved water vaporcontent is compared with upper air observations at Chichijima Island. The rms of errors is estimated at 3.3 Kg m^–2. The retrieved liquid water content is related to monthly precipitation observed at Chichijima Island, and a correlation coefficient of 0.68 is obtained.With 7 Figures     

Comparative Study on Conservation of Agricultural Heritage Systems in China,Japan and Korea

The paper compares the agricultural heritage conservation schemes of China, Japan and Korea and, in particular, the national programs and their implementation under Food and Agriculture Organization of the United Nations (FAO)’s Globally Important Agricultural Heritage Systems (GIAHS). This comparison allows an understanding of the background of developments, designation criteria, application procedures and implementation structures of GIAHS and of the respective domestic programs in terms of the differences in national circumstances of Japan, China and South Korea. The sequence of implementation of GIAHS and the national program differs in each of the three countries. China introduced a national program after GIAHS designation, Japan has GIAHS but no national program, and Korea implemented a national program before its GIAHS designation. Thus GIAHS candidate sites in China and Korea are now selected from among their respective pools of national agricultural heritage sites. On the other hand, commonalities can be seen in the perspectives of the three countries with regards to agricultural heritage conservation through the common emphasis placed on the designation criteria: historical significance, cultural value, fostering partnerships, rural revitalization and biodiversity conservation associated with the agricultural heritage systems etc. Thus, the cooperation between China, Japan and Korea and the perspectives they have will contribute to proposals for improvements to the FAO designation criteria for GIAHS. These will be comprehensively applicable to both developing and developed countries.     

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.     

Partial melting kinetics of plagioclase-diopside pairs

Partial melting experiments on plagioclase (An₆₀) and diopside have been carried out using pairs of large crystals to investigate textures and kinetics of melting. The experiments were done at one atmosphere pressure as a function of temperature (1,190–1,307° C) and time (1.5–192 h). Melting took place mainly at the plagioclase-diopside contact planes. Reaction zones composed of fine mixtures of calcic plagioclase and melt were developed from the surface of the plagioclase crystal inward. There exists a critical temperature, below which only a few % melting can occur over the duration of the experiments. This sluggish melting is caused by slow NaSi-CaAl diffusion in plagioclase, because the plagioclase crystal must change its composition to produce albite-rich cotectic melts. Diffusion in the solid also affects the chemical composition of the melts. During initial melting, potassium is preferentially extracted from plagioclase because K-Na diffusion in plagioclase is faster than that of NaSi-CaAl. This also causes a shift in the cotectic compositions. Above the critical temperature, on the other hand, melting is promoted by a metastable reaction in which the plagioclase composition does not change, and which produces melts with compositional gradients along the original An₆₀-diopside tie line. The critical temperature is determined by the intersection of the cotectic and the An₆₀-diopside tie line. Interdiffusion coefficients of plagioclase-diopside components in the melt are estimated from melting rates above the critical temperature by using a simplified steady-state diffusion model (e.g., 10^–8 cm²/sec at 1,300° C).Many examples of reaction zones due to partial melting have been described as spongy or fingerprint-like textures in xenoliths. Metastable melting above the critical temperature is considered to take place in natural melting where there is a high degree of melting. However, we cannot exclude the possibility of disequilibrium created by sluggish melting controlled by diffusion in the minerals. If melting occurs close to the solidus, this process can be important even for partial melting in the upper mantle.     

Limit states and failure mechanisms of viscous dampers and the implications for large earthquakes

Fluid viscous dampers are used to control story drifts and member forces in structures during earthquake events. These elements provide satisfactory performance at the design‐level or maximum considered earthquake. However, buildings using fluid viscous dampers have not been subjected to very large earthquakes with intensities greater than the design and maximum considered events. Furthermore, an extensive database of viscous damper performance during large seismic events does not exist. To address these issues, a comprehensive analytical and experimental investigation was conducted to determine the performance of damped structures subjected to large earthquakes. A critical component of this research was the development and verification of a detailed viscous damper mathematical model that incorporates limit states. The development of this model and the laboratory and simulation results conclude good correlation with the new model and the damper limit states and provide superior results compared with the typical damper model when considering near collapse evaluation of structures. Copyright © 2010 John Wiley & Sons, Ltd.     

Sulfur isotope study of Quaternary volcanic rocks from the Japanese Islands Arc

The sulfide and sulfate contents and their δ³⁴S values were determined in Quaternary volcanic rocks from the Japanese Islands Arc. The total sulfur contents are much lower (less than 40 ppm) and the δ³⁴S values are higher (+4.4 ± 2.1) than those of ocean-floor basalts (800 ± 100 ppm and +0.8 ± 0.5, respectively; Moore and Fabbi, 1971; Sakaiet al., 1982). Lateral variations of both sulfur content and δ³⁴S values were observed in the four volcanic belts in Japan. In the Northeast Japan belt, the sulfur content (30 ± 10 ppm) of the rocks in the inner zone (the Japan Sea side) is 3 to 5 times that in the outer zone (the Pacific side), although the δ³⁴S values of the two zones are almost the same (+4.3 ± 1.0). The δ³⁴S values for the two belts in West Japan are on the average 2%. higher than those of East Japan.This study suggests that the primary magmas that formed the island arc volcanic rocks are initially depleted in sulfur (<120 ppm) and enriched in ³⁴S ($\text{δ}{}^{34}\text{S: +5 ～ +7}$) compared to ocean-floor tholeiitic basalts which formed at mantle under oceanic region. This indicates that the upper-mantle is heterogeneous in sulfur content and isotope composition.